beeper HYB03-5 Type 2 Charging Cable for Electric Vehicles User Guide
- June 10, 2024
- beeper
Table of Contents
beeper HYB03-5 Type 2 Charging Cable for Electric Vehicles User Guide
This document is a guide providing you with essential information about your product.
Ta install and use Our product in total safeplease consult the complete technical manual available at the following address: http://urlr.me/HBQf7 or by scanning the QR cade below.
SAFETY instructions
Beeper thanks you for your purchase and invites you, before using your product, to read the precautions for use and safety instructions by consulting the complete installation and user manual available at the address indicated at the bottom of the page, or by scanning the QR code located on the first and last page of this Quick Start Guide.
Always use your product according to the process described in this manual.
- Your product is designed only to charge an electric vehicle according to the IEC-62196 standard with a so-called “Type 2′ connector on the 400V three-phase electrical network. Never use it for any other purpose or with any other vehicle or object.
- Perform a visual inspection of your product before each use. Stop using it if it has the slightest defect such as a crack, bare cable, oxidation of the contacts, trace of burns or more generally if it does not work anymore.
- Never attempt to open, disassemble, repair, alter or modify your product. Any attempt to do so will automatically void the warranty of the device irreversibly. Contact our After Sales Service in the event of a breakdown.
- The use of extension cords, multiple sockets, conversion sockets to connect your product is strictly prohibited.
- Do not plug your product into a damaged, loose or damaged outlet. Make sure the connector pins fit snugly into the terminal and that the connector is pushed all the way in.
- Do not use your product in extreme weather conditions (heavy rain, snow, storm, bad weather, heat wave).
- During handling and transport, do not subject your product to intense impact, torsion or crushing.
- Protect your product from moisture, especially during storage. If it appears damaged or corroded, do not use it.
- If it rains while charging, do not allow water to run down the cable to the charging port, wall outlet or base of the charging station.
- Do not insert any metallic object or any other foreign object into the connectors. Do not touch your product with a sharp or metallic object such as a too, a thread or a needle.
- Do not cover your product while charging.
- Make sure that the cable of your product does not obstruct the passage of pedestrians, objects or any type of vehicle.
- Do not use solvents to clean your product.
- Always wind the cable of your product in a coil Do not twist it, do not twist it, do not bend it.
- Do not store your product outside exposed to the sun, strong heat or bad weather for several days.
- This product is not a toy, please keep it out of the reach of children when stored.
CONNECTION Plan
NOTE: For instructions on how to use the cable, please consult the complete technical manual before first use.
TECHNICAL Data
Electrical specifications
- Charging standard: IEC 62196-2, Type 2 socket
- Nominal voltage: 220V – 480V – Three-phase – 3 phases
- Rated current: 32A 22kW
- Frequency: 50/60Hz
- Insulation resistance: > 1000MO
- Contact impedance/resistance: > 0.5mO
- Withstand voltage: 2,000V
Resistance & Materials
- Hull fire resistance rating rubber: UL94 V-0
- Mechanical life: Unloaded connected > 10,000 times
- Waterproof index: IP54
- Plastic shell: Thermoplastic
- Conductor: Copper alloy, silver plating
- Operating temperature: -30°C / +50°C
- Terminal temperature rise:< 50K
- Insertion and extraction force: 45N – 100N
- Cable specification: TPU
- Cable length: 5m (ref. HYB03-5), 10m (ref. HYB03-10)
- Certifications: T0V/CE
WARRANTY and TECHNICALASSISTANCE
This product is guaranteed for 3 years.
In the event of a problem encountered during the warranty period, please
consult the warranty and after-sales service conditions available on our
website www.beeper.fr.
Declaration of COMPLIANCE
This equipment complies with current standards.
The full text of the EU declaration of conformity is available on our website
www.beeper.fr on the article page of the product
(“Conformity” tab).
0/XIT Beeper 2022. The reproduction of data, information, descriptions, photos of this document is subject to prior authorization IXIT Beeper. AU information in this manual are indicative and not of a contractual nature and ore subject to change without notice. These data’s are in reserve of prior check of with to do IXIT Beeper disclaims for damage to a vehicle after the intention of this product.
IXITBEEPER
228 rue de l’Ancienne Distillerie
Pare des Grillons
69400Gleize
FRANCE
contact@beeper.fr
www.beeper.fr
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>