MONACOR ETS-340TW-WS PA Column Speaker Instructions
- June 12, 2024
- MONACOR
Table of Contents
MONACOR ETS-340TW-WS PA Column Speaker
Product Information
The Audio Company PA Column Speaker is a high-quality speaker system designed for professional audio installations. It is specifically designed for use with 100 V PA technology and is intended for installers with knowledge in this area. The speaker delivers excellent sound quality and is suitable for various indoor applications.
Specifications:
- Frequency Range: ETS-340TW/WS – 40 Hz to 20 kHz, ETS-360TW/WS – 60 Hz to 15 kHz
- Power Rating: ETS-340TW/WS – 40 W (bass speakers), 20 W (bass-midrange speakers), 10 W (tweeter), ETS-360TW/WS – 60 W (bass speakers), 30 W (bass-midrange speakers), 15 W (tweeter)
- Impedance: ETS-340TW/WS – 250 Ω (bass speakers), 500 Ω (bass-midrange speakers), 1 kΩ (tweeter), ETS-360TW/WS – 166 Ω (bass speakers), 333 Ω (bass-midrange speakers), 666 Ω (tweeter)
- Sensitivity: ETS-340TW/WS – 92 dB (1 W / 1 m), ETS-360TW/WS – 94 dB (1 W / 1 m)
The column speaker is supplied with two mounting brackets for easy installation. It features an M8 threaded jack on both its upper and lower sides for attaching the brackets securely. It is important to use both mounting brackets to ensure safe installation.
Electrical connection should be carried out by skilled personnel. The column speaker should be connected to the 100 V audio cable of the amplifier using the black terminal COM and the red terminal corresponding to the desired power rating. It is crucial to switch off the amplifier before making any connections to avoid any voltage hazards.
Product Usage Instructions
- Read the instructions carefully prior to installation and keep them for future reference.
- Ensure that you have the necessary knowledge and expertise in 100 V PA technology.
- Select a suitable location for installation.
- Use a soft, dry cloth to clean the speaker. Do not use water or chemicals.
- For safe installation, use both mounting brackets provided.
- Connect the column speaker to the 100 V audio cable of the amplifier using the black terminal COM and the red terminal corresponding to the desired power rating.
- If multiple column speakers are used in a room, ensure they all have the same polarity.
- In a 100 V system, ensure that the total power of all connected speakers does not exceed the amplifier power to avoid damage.
- Dispose of the product in accordance with local regulations if it is no longer in use.
PA Column Speaker
These instructions are intended for installers with specific knowledge of 100
V PA technology. Please read the instructions carefully prior to installation
and keep them for later reference.
Applications
This high-quality column speaker in a wooden cabinet is specially designed for applications in PA systems using 100 V technology. As a 2 ½-way system, it is ideally suited for reproducing speech and music. The power is matched via selection of the terminals.
Important Notes
The product corresponds to all relevant directives of the EU and is therefore
marked with .
The product corresponds to the relevant UK legisla-tion and is therefore
marked with UKCA.
- The product is suitable for indoor use only. Protect it against dripping water, splash water and high air humidity. The admissible ambient temperature range is 0 – 40 °C.
- For cleaning only use a dry, soft cloth; never use chemicals or water.
- No guarantee claims for the product and no liability for any resulting personal damage or material damage will be accepted if the product is not correctly used, if it is not safely installed or not expertly repaired.
If the product is to be put out of operation definitively, dispose of the product in accordance with local regulations.
Installation
The column speaker is supplied with two mounting brackets including matching
washers and screws. For fastening the brackets, the column speaker is pro-
vided with an M8 threaded jack each on its upper and lower sides. Install the
column speaker expertly at a suitable place.
IMPORTANT: Always use both mounting brackets to ensure safe installation!
Electrical Connection
WARNING: During operation, there is a hazard of contact with a dangerous voltage of up to 100 V at the connection cable. Installation must be made by skilled personnel only.
Prior to connection, switch off the amplifier so that its 100 V audio cable
will not carry any voltage!
Connect the column speaker to the 100 V audio cable of the amplifier via the
black terminal COM and the red terminal corresponding to the desired power
rat-ing. If there are several column speakers in a room, make sure that they
all have the same polarity.
Please make sure to note: In a 100 V system, the total power of all speakers connected must not exceed the amplifier power. An overload may damage the amplifier!
© MONACOR INTERNATIONAL All rights reserved
A-0746.99.04.04.2023
CE
MONACOR INTERNATIONAL GmbH & Co. KG Zum Falsch 36, 28307 Bremen
Germany
UKCA
Importer: Epic Audio Ltd, Unit 9 Apollo Park Station road, Long Buckby,
NN6 7PF
United Kingdom, Company Registration: 13878247
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>