ORTECH OD-A2032W LED Landscape Lighting Deck Lights Instruction Manual

ORTECH OD-A2032W LED Landscape Lighting Deck Lights

Product Information

• Product Name: LED Landscape Lighting – Deck Lights
• Model: OD-A2032W
• Operating Voltage Range: 9V-15V AC/DC
• Application: Outdoor lighting for decks

Product Usage Instructions

1. Ensure that the installation is carried out by a qualified electrician.
2. Read all installation instructions provided in the attached instruction sheet.
3. Install the step lightly in accordance with the National Electric Code (NEC) and local code specifications.
4. Keep the fixture away from combustibles.
5. Turn off or unplug the fixture before changing the lamp.
6. Do not touch the lamp directly when changing it after servicing.
7. When using multiple luminaires, ensure that the total load does not exceed the transformer rating.
8. Do not operate the LED Deck Light if it is fitted with a missing or damaged shield.
9. Ensure that all luminaires are installed at least 10 feet (3.05m) away from a pool, spa, or fountain.
10. Use a soft cloth to handle the lamp and avoid touching it directly with your hands to prevent damage from oil on the skin.
11. Always use UL, cUL, and CSA-recognized wire connectors for connections.
12. Avoid using extension cords on power units.
13. Avoid touching a hot lens, guard, or enclosure.

Components

• Lights
• Installation Instruction
• Mounting Screws
• Fixture Cap
• Plastic Anchors (optional)
• Screws
• Drill Template (FIG. B)

Contact Information

• Ortech Industries
• Email: info@ortechindustries.com
• Website: www.ortechindustries.ca

Locations

1. 13376 Comber Way, Surrey BC V3W 5V9
2. 205 Summerlea Rd, Brampton, ON L6T 4E5

Contact Numbers
Toll-Free: 1-888-543-6473
Toll-Free (alternate): 1-888-541-6474

WARNING

WARNING — THE INSTALLATION MUST BE CARRIED OUT BY A QUALIFIED ELECTRICIAN.

1. Read all installation instructions before installing the fixture and keep the attached instruction sheet.
2. This step light is intended for installation in accordance with the National Electric Code (NEC) and local code specifications.
3. The operating voltage range is 9V-15V AC/DC.

Application Notice

1. Keep away from combustibles. Turn OFF / unplug to change the lamp. DO NOT touch the lamp and replace it after servicing
2. When using multiple luminaires, the load is not to exceed the total watts of the transformer rating
3. DO NOT operate the LED Deck Light fitted with a missing or damaged shield
4. Install all luminaires 10 feet (3.05m) or more from a pool, spa, or fountain
5. DO NOT touch the lamp directly at any time. Use a soft cloth. Oil from the skin may damage the lamp
6. ALWAYS use UL, cUL, and CSA-recognized wire connectors for connections
7. DO NOT use extension cords on power units
8. DO NOT touch the hot lens, guard, or enclosure

CAUTION
PLEASE READ THE INSTRUCTIONS BEFORE COMMENCING INSTALLATION AND RETAIN FOR FUTURE REFERENCE. Electrical products can cause death or injury, or damage to property.
If in any doubt about the installation or use of this product, consult a competent electrician.

COMPONENTS

Please make sure the following items are included when opening the box:

INSTALLATION

1. Turn off the power supply.

2. Open the fixture by twisting the cap counterclockwise, then pulling the cap away from the fixture. The first time it may be difficult.

3. Determine the desired location for each fixture, if desired, drill the wire way hole at this time. Hold the fixture in the correct direction (lead the wire through the wire way hole if necessary), and secure it with screws.
   When installing on surfaces like brick or concrete walls, plastic anchors are required. Mark the location of the holes with the template in FIG.B and drill the holes for the plastic anchors with an appropriate drill bit for the material you are drilling into. Place the plastic anchors in the holes. If desired, drill the wire way hole at this time. Put the fixture with the gasket at the back to the location, (lead the wire through the wire way hole if necessary) and screw the 2 screws into the anchors through the holes on the fixture, securing the fixture.

4. Strip the 2 leads from the fixture pigtail wire. Connect the leads from the fixture to the main low-voltage supply cable leads.

5. Put back the cap and fix it by twisting clockwise.

info@ortechindustries.com www.ortechindustries.cac 13376 Comber Way Surrey BC V3W 5V9 205 Summerlea Rd Brampton, ON L6T 4E5

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, READ THE INSTRUCTIONS BELOW

References

• Led Lighting, Electrical and Hvac Supplier Ortech Industries

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>