Indu-Sol PROmesh B16 Industrial Ethernet Switches User Guide
- June 12, 2024
- Indu-Sol
Table of Contents
- Device Connections
- Technical Data
- General Information
- Safety Instructions
- Scope of Delivery
- Mounting on the DIN Rail
- Power Supply
- Configuring a Network Connection
- Accessing the Web User Interface
- Interpreting LED Displays
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Indu-Sol GmbH –Specialist in Industrial Networks
PROmesh B16
Quickstart User Guide
Industrial Ethernet Switches
Device Connections
Technical Data
| Voltage Supply | 2x 24 VDC |
|---|---|
| Max. Current Consumption | 0,8 A |
| Max. Power Consumption | 8W |
| Size (H x W x D) | 138 x 53 x 110 mm |
| Weight | 800 g |
| Mounting | 35 mm DIN rail |
| Protection Class | IP20 |
| Storage temperature | -10°C … 60°C |
| Operating temperature | -10°C … 60°C |
| Relative Humidity | 5% .. 95%, RHD non-condensing |
| PROFINET Conformance | Class B |
| PROFINET standard | PROFINET 2.4 |
| Port Mirroring | Rx, Tx+Rx |
| PROFINET Netload Class | Class III |
| Data Ports | 16x 10/100 MBit/s RJ45 |
| Switching Mode | Store & Forward |
| Diagnosis & Management | Network load monitoring |
Port-Mirroring
DCP, I&M
SNMPv1, v2c, v3
General Information
The PROmesh B16 is a full-managed Ethernet/PROFINET switch for industrial automation systems which can be easily and conveniently configured via a web UI. It enables uncomplicated installation of bus, star and ring structures with switching functionality.
Safety Instructions
Before putting the PROmesh B16 into operation, check whether it is in perfect
condi- tion externally. Always observe the technical specifications of the
device to ensure safe and optimal use. The PROmesh B16 is designed for IP30
protection environments. Take
appropriate measures to ensure proper operation of the unit in a different
environment.
! WARNING
In case of suspected damage, please return the PROmesh B16 immediately to your
supplier and do not put it into operation.
Do not open the housing under any circumstances. Unauthorized opening of the
housing will void any warranty claims.
The PROmesh B16 is designed for use in PROFINET applications according to
Conformance Class B.
For complete support of the PROFINET standards, please also observe the
selection, layout and wiring of the data ports according to these standards.
Scope of Delivery
- PROmesh B16
- 7-pole 5 mm terminal block (power supply and alarm contact)
- Quickstart User Guide (hardcopy)
Mounting on the DIN Rail
Mount the PROmesh B16 upright in the switch cabinet on a 35 mm DIN rail (DIN
EN 60715).
! WARNING
Do not mount the PROmesh B16 directly next to devices that generate strong
electromagnetic interference fields or constantly emit heat to their
surroundings. Also protect the PROmesh B16 from intense sunlight.
Power Supply
The PROmesh B16 is operated with a redundant DC voltage of 24 VDC, Connect a
suitable power source to the labeled terminals of the 7-pin 2,5 mm2 terminal
block. Connect the positive lead to one of the VDC contacts and the ammunition
lead to the corres-ponding GND contact.
If the external power supply is correctly connected and activated, all status
LEDs of the PROmesh B16 will light up briefly. After a short initialization
phase the LEDs go out and the device is ready for operation and can now be
configured in the network.
Configuring a Network Connection
Download the Service Tool to your client PC (Windows). You can find the
software at the following link: https://sdx.indu-sol.com/s/EBcg2Qn8yG8KZFf
! NOTE:
Our software is updated regularly. Please, make sure you are using the latest
version.
Connect the PC to a suitable data line on one of the data ports (P1 – 16).
The PROmesh B16 and the client PC must be located in the same IP address range
and IP subnet. For this you have to assign a corresponding IP address to your
PROmesh B16 for the first time. Use the already installed ServiceTool.
After assigning a suitable IP address and subnet mask, the Web UI of the
PROmesh B16 can be reached.
The PROmesh B16 is delivered with the following factory settings:
| IP Adress | 0.0.0.0 |
|---|---|
| Subnet mask | 0.0.0.0 |
| Gateway | 0.0.0.0 |
| Username | admin |
| Password | admin |
After successful installation and start of the software, you can scan the
system with the search setting PROFINET-Gerät. The PROmesh B16 is displayed in
the search result. You can then make and save individual entries in the input
mask.
! NOTE: Make sure that the IP address you selected has not yet been
assigned. If required, you can display IP addresses that have already been
assigned using the PROscan® Active V2 license software from Indu-Sol.
! WARNING:
When logging in for the first time, you must change the factory-set password.
It is your responsibility to document this password and protect it against
unauthorized access
Accessing the Web User Interface
The device-specific functions of the PROmesh B16 can be configured via an
integrated Web-UI. Open your browser, enter the IP address of the PROmesh B16
configured in the ServiceTool in your browser bar or use the above
configuration data. Alternatively, you can right-click on the corresponding
list entry in the context menu of the ServiceTool to select „to website“. The
Web UI now opens in your standard browser.
! NOTE:
Further information on the configuration options and troubleshooting can be
found at the following link: https://sdx.indu-sol.com/s/EBcg2Qn8yG8KZFf
Interpreting LED Displays
| LED label | Mode | Meaning |
|---|---|---|
| VDC1 | Green | Voltage at terminal sufficient |
| Off | Voltage at terminal insufficient | |
| VDC2 | Green | Voltage at terminal sufficient |
| Off | Voltage at terminal insufficient | |
| Status | Green | Active connection to the PROFINET controller |
| Yellow | No active connection to the PROFINET controller | |
| Error | Red | Power failure, port error or configured alarm active |
| Off | No power failure, no port error and no configured alarm active | |
| Port Status | On | The port has established a valid network connection |
| Flashing | The port is in network communication exchange | |
| Off | The port has not established a valid network connection |
Indu-Sol GmbH
Blumenstraße 3
04626 Schmoelln
Germany
Telephone: +49 (0) 34491 580-0
Telefax: +49 (0) 34491 580-499
info@indu-sol.com
www.indu-sol.com
Certified according to DIN EN ISO 9001:2015 All accompanying materials of the
product can be found at: https://sdx.indu-sol.com/s/EBcg2Qn8yG8KZFf
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>