Indu-Sol PROmesh P10+ Port Managed Switch User Guide

Indu-Sol PROmesh P10+ Port Managed Switch

General Notes

! WARNING
Commissioning and operation of this device may be carried out by qualified personnel only. Qualified personnel are persons who are authorized to commission, ground and label devices, systems and circuits in accordance with the standards of safety engineering.

Something‘s wrong with your product?
You can reach our technical support team on weekdays between 07:30 am – 04:30 pm (CET) by telephone: +49(0)34491 / 581-14 or send us an e-mail: support@indu-sol.com. We will get in touch with you promptly.

Your system is at a standstill?
Reach out to our emergency service even outside our regular opening hours: +49(0)34491 / 580-0.

Version 1.0 | Date: 22.05.2022 | Product Code: 114110204 Printed in Germany
This document is subject to change without notice.
© Copyright 2022 Indu-Sol GmbH

Device Connections

Technical Data

monitoring Network load monitoring Port-Mirroring DCP, I&M SNMPv1, v2c, v3 SD Card

General Information

The PROmesh P10+ is a full-managed Ethernet/PROFINET switch for industrial automation systems which can be easily and conveniently configured via a web UI. It enables uncomplicated installation of bus, star and ring structures with switching functionality.

Safety Instructions

! WARNING
Before putting the PROmesh P10+ into operation, check whether it is in perfect condition externally. Always observe the technical specifications of the device to ensure safe and optimal use. The PROmesh P10+ is designed for IP20 protection environments. Take appropriate measures to ensure proper operation of the unit in a different environment.

In case of suspected damage, please return the PROmesh P10+ immediately to your supplier and do not put it into operation.

Do not open the housing under any circumstances. Unauthorized opening of the housing will void any warranty claims.

The PROmesh P10+ is designed for use in PROFINET applications according to Conformance Class B.

For complete support of the PROFINET standards, please also observe the selection, layout and wiring of the data ports according to these standards.

Scope of Delivery

• PROmesh P10+
• 7-pole 5 mm terminal block (power supply and alarm contact)
• Quickstart User Guide (hardcopy)
• SD Card, can be used for backup and updates

Mounting on the DIN Rail

! NOTE
Mount the PROmesh P10+ upright in the switch cabinet on a 35 mm DIN rail (DIN EN 60715).

The following distances to other modules must be observed:

• right / left: 50 mm
• top / bottom: 50 mm

Power Supply

! WARNING
Do not mount the PROmesh P10+ directly next to devices that generate strong electromagnetic interference fields or constantly emit heat to their surroundings. Also protect the PROmesh P10+ from intense sunlight.
The PROmesh P10+ is operated with a redundant DC voltage of 24 VDC, Connect a suitable power source to the labeled terminals of the 7-pin 2,5 mm2 terminal block.
Connect the positive lead to one of the VDC contacts and the ammunition lead to the corresponding GND contact
If the external power supply is correctly connected and activated, all status LEDs of the PROmesh P10+ will light up briefly. After a short initialization phase the LEDs go out and the device is ready for operation and can now be configured in the network.

Configuring a Network Connection

Download the Service Tool to your client PC (Windows). You can find the software at the following link:
https://sdx.indu-sol.com/s/SNGk4crFK5gCDJ8

! NOTE
Our software is updated regularly. Please, make sure you are using the latest version.
Connect the PC to a suitable data line on one of the data ports (P1 – 10).
The PROmesh P10+ and the client PC must be located in the same IP address range and
IP subnet. For this you have to assign a corresponding IP address to your PROmesh
P10+ for the first time. Use the already installed ServiceTool.
After assigning a suitable IP address and subnet mask, the Web UI of the PROmesh P10+ can be reached.
The PROmesh P10+ is delivered with the following factory settings:

! NOTE
After successful installation and start of the software, you can scan the system with the
search setting PROFINET-Gerät. The PROmesh P10+ is displayed in the search result. You
can then make and save individual entries in the input mask.
Make sure that the IP address you selected has not yet been assigned. If required, you
can display IP addresses that have already been assigned using the PROscan® Active V2
license software from Indu-Sol.

! WARNING
When logging in for the first time, you must change the factory-set password. It is your responsibility to document this password and protect it against unauthorized access

Accessing the Web User Interface

The device-specific functions of the PROmesh P10+ can be configured via an integrated
Web-UI. Open your browser, enter the IP address of the PROmesh P10+ configured in the Service Tool in your browser bar or use the above configuration data. Alternatively, you can right-click on the corresponding list entry in the context menu of the Service Tool to select „to website“. The Web UI now opens in your standard browser.

! NOTE
Further information on the configuration options and troubleshooting can be found at the following link:
https://sdx.indu-sol.com/s/SNGk4crFK5gCDJ8

Interpreting LED Displays

Customer Support

Indu-Sol GmbH
Blumenstraße 3
04626 Schmoelln
Germany
Telephone: +49 (0) 34491 580-0
Telefax: +49 (0) 34491 580-499
info@indu-sol.com
www.indu-sol.com
Certified according to DIN EN ISO 9001:2015

Alle Begleitmaterialien des Produkts finden Sie unter /
All accompanying materials of the product can be found at:
https://sdx.indu-sol.com/s/SNGk4crFK5gCDJ8

References

• Sol.com | Welcome
• Indu-Sol | Feldbusse & industrielle Netzwerke optimieren
• SDX

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>