iottie Easy One Touch 6 Dash or Windshield Mount User Manual

iottie Easy One Touch 6 Dash or Windshield Mount

Product Information

The Easy One Touch 6 Dash/Windshield Mount is a versatile mount designed to securely hold your smartphone while driving. It features an easy one-touch lock and release mechanism, allowing you to mount and retrieve your device quickly and effortlessly. The mount can be attached to either the dashboard or windshield, depending on your preference.

At a Glance

• Cradle Knob
• Cord Organizer
• Easy One Touch Trigger Button
• Rotating Ball Joint Telescopic Arm
• Pivot Knob
• Locking Side Arms
• Foot
• Lever
• Suction Cup
• Release Bars
• Dashboard Pad

Product Specifications

Product Usage Instructions

Assembling the Mount

1. Connect the mount cradle to the ball joint.
2. Tighten the cradle knob.

Attaching the Mount

Choose an installation method: dashboard/flat surface (Option A) or windshield/curved glass (Option B).

Option A – Dashboard or Flat Surface Installation

1. Choose a flat location on the vehicle’s dashboard and wipe any dust or debris from the surface.
2. Peel off the film on the dashboard pad and evenly press it onto the desired installation location. Wait at least 20 minutes before attaching the mount to ensure a secure hold.
3. Remove the plastic cover from the suction cup and firmly press the mount onto the dashboard pad.
4. Push the locking lever down to engage suction.
5. Note: The dashboard pad is mounted with a semi-permanent adhesive tape and cannot be re-mounted once removed. Use caution when removing to avoid damage.

Option B – Windshield or Curved Glass Installation

1. Choose a location on the windshield and wipe any dust or debris from the surface.
2. Peel off the protective film on the suction cup and press the mount firmly onto the windshield.
3. Push the locking lever down to engage suction.
4. To reuse the suction cup, rinse it under warm water and let it air dry to restore tacky suction.

Easy One Touch Mechanism

The Easy One Touch lock and release mechanism allows for quick mounting and retrieval of your smartphone.

Mounting

1. Squeeze the release bars.
2. Press your device against the Easy One Touch trigger button.
   The mount’s arms will automatically close on contact.

Releasing

Squeeze the release bars again to release your device.

Adjusting the Mount

The mount can be adjusted to fit your preferences and device size.

• Cradle Knob: Loosen the cradle knob to rotate the cradle. Tighten to lock it into the desired position.
• Bottom Foot: Adjust the foot up and down to fit any size phone by pulling down or pushing up.
• Telescopic Arm: Extend the arm by pulling it outward and slide it into the desired position.
• Pivot Knob: Turn the pivot knob to adjust the telescopic arm. Tighten to secure the arm in place.

Index
For optimal mounting, please follow the detailed instructions within this manual when using the Easy One Touch 6. iOttie is not liable for possible damages due to product misuse.

Product Information

At a Glance

Product Specifications

*Telescopic arm extends from 5″–7.5″.

Installation

Assembling the Mount

1. Connect the mount cradle to the ball joint.
2. Tighten the cradle knob.

Attaching the Mount

Choose an installation method: dashboard/flat surface (A) or windshield/curved glass (B).

• If your vehicle has a leather dashboard, we recommend windshield mounting to avoid damaging your dash.

[ Option A ]
Dashboard or Flat Surface Installation

Choose a flat location on the vehicle’s dashboard and wipe any dust or debris from the surface.

1. Peel off the film on the dashboard pad and evenly press onto the desired installation location. Wait at least 20 minutes before attaching the mount to ensure a secure hold.
2. Remove the plastic cover from the suction cup and firmly press the mount onto the dashboard pad.
3. Push the locking lever down to engage suction.

The dashboard pad is mounted with a semi-permanent adhesive tape. Once removed, it cannot be re-mounted.
When mounting, it is recommended that the surface and product be above 65 °F.
*When removing the dashboard pad, please use caution. We recommend removing slowly from the edge to avoid damage.

[ Option B ] Windshield or Curved Glass Installation

Choose a location on the windshield and wipe any dust or debris from the surface.

• The dashboard pad is not recommended for windshield mounting.

1. Peel off the protective film on the suction cup and press the mount firmly onto the windshield.
2. Pushing the locking lever down to engage suction.

• *To reuse the suction cup, simply rinse under warm water and let air dry to restore tacky suction.

Easy One Touch Mechanism

The Easy One Touch lock and release mechanism makes it simply to mount and retrieve your smartphone in seconds.

[ Mounting ]

1. Squeeze the release bars.
2. Press your device against the Easy One Touch trigger button. The mount’s arms will automatically close on contact.

[ Releasing ]

Squeeze the release bars again to release your device.

Adjusting the Mount

Cradle Knob
To rotate the cradle, loosen the cradle knob. Tighten to lock into desired position.

Bottom Foot
The foot can be adjusted up and down to fit any size phone by pulling down or pushing up.

Telescopic Arm
To extend the arm, simply pull it outward and slide it into desired position.

Pivot Knob
Turning the pivot knob allows you to adjust the telescopic arm. Tighten to secure the arm in place.

warranty

The Easy One Touch 6 Dash/Windshield Mount is backed by a 2 year warranty.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>