PNi WP101B Flush-Mounted Socket Outlet User Manual

June 12, 2024
PNI

PNi WP101B Flush-Mounted Socket Outlet

PNi-WP101B-Flush-Mounted-Socket-Outlet-PRODUCT

Product Information

Product Name: PNI WP101B
Description: Flush-mounted socket outlet
Compatible Box: The PNI WP101B socket is compatible with flush mounting boxes with screws on the left and right sides.

Flush-mounted socket outletPNi-WP101B-Flush-Mounted-Socket-Outlet-
FIG-1

Technical Specifications

  • L- Line
  • PE – Ground
  • N – Neutral
  • Rated voltage: 110 V – 250 V
  • Rated current: max. 16 A
  • Maximum load: 5 ~ 3000W
  • Dimensions: 86 x 86 x 40 mm

Connection diagramPNi-WP101B-Flush-Mounted-Socket-Outlet-
FIG-2

EU Declaration of Conformity
The PNI WP101B simple plug-in socket is in compliance with flush mounting boxes with screws on the left and right sides EMC Directive 2014/30/EU.

Simplified EU declaration of conformity
SC ONLINESHOP SRL declares that the PNI WP101B simple plug-in socket is in compliance with the EMC Directive 2014/30/EU The full text of the EU Declaration of Conformity is available at the following internet address: https://www.mypni.eu/products/9200/download/certifications

Product Usage Instructions

  1. Ensure that you have a compatible flush mounting box with screws on the left and right sides.
  2. Connect the L (Line) wire to the L terminal of the socket.
  3. Connect the PE (Ground) wire to the PE terminal of the socket.
  4. Connect the N (Neutral) wire to the N terminal of the socket.
  5. Make sure all connections are secure and properly tightened.
  6. Mount the socket into the flush mounting box, aligning the screw holes with the screws on the box.
  7. Tighten the screws to secure the socket in place.
  8. Verify that all connections are correct and secure before using the socket.

Warnings

  • To prevent the risk of electrocution it is essential to turn off the mains electricity supply before commencing work.
  • Do not work on the socket outlet if it is connected to the mains.
  • This product should be installed by a qualified electrician.
  • It is important to make all connections according to the connection diagram below.
  • At the end of the assembly, make sure that the wires are not stressed and that the screws are well tightened.
  • The socket outlet must be grounded and the grounding cables must be properly insulated.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals