JUNO H-Type Adapter Instruction Manual
- June 12, 2024
- Juno
Table of Contents
JUNO H-Type Adapter
Product Information
The product is an H-Type Adapter used for installation purposes. It is designed to be inserted into a track to connect different components. The adapter box has a latch and a polarity line, which are important for proper installation.
Product Usage Instructions
-
Locate the latch and the polarity line on the adapter box.
-
Align the parts as shown in the diagram below.
-
Insert the adapter box into the track.
-
Rotate the adapter box in the opposite direction of the arrows until the latch snaps in place between the two track rails.
-
Continue to depress the latch until the adapter box reaches its final position.
-
For second circuit positioning, hold onto the Adapter Box with one hand.
-
Place the end of a flat head screwdriver under the contact shown in the diagram below.
-
Gently pull up on the screwdriver, and the contact should move vertically until it hits a hard stop.
-
Follow the instructions for inserting the adapter box into the track.
Following these instructions will ensure proper installation of the H-Type Adapter. Please refer to the diagrams for visual guidance.
INSTALLATION INSTRUCTIONS For H-Type Adapter
SAVE THESE INSTRUCTIONS
- Find the latch and the polarity line. Align parts as shown below and insert the adapter box into the track
- Rotate the adapter box opposite the arrows until the latch snaps in place between the two track rails
- Final Position
Second Circuit Positioning
- Hold onto Adapter Box with one hand
- Place the end of a flat head screw driver under the contact shown below
- Gently pull up, the contact should move vertically until hitting a hard stop
- Follow instructions for inserting into track
1300 S. Wolf Road • Des Plaines, IL 60018 • 800-323-5068 •www.acuitybrands.com ©2017 Acuity Brands Lighting, Inc. Rev 4/18 P4677