IDEAL 42 SpliceLine Wire Connectors Instruction Manual
- June 3, 2024
- IDEAL
Table of Contents
IDEAL 42 SpliceLine Wire Connectors
Model 42
- Do not exceed the rating of these connectors.
- Turn OFF the power before removing or installing connectors.
- Wiring must comply with all applicable electrical regulations.
- COPPER TO COPPER ONLY. Do not use on aluminum wire.
- Incorrect use of these connectors can cause electrical fires, personal injury or death.
- These connectors are suitable for solid and semi-rigid (<7 strands) conductors. They are not suitable or rated for use with flexible cable with >7 strands.
- Strip wires back 13mm.
- Grip the wire firmly and push the conductor into an open port.
- Use only one conductor per port.
- Connectors are reusable on solid wires of the same wire gauge or larger. If reusing connectors, cut and re-strip conductors
- In order to remove a wire, pull and twist the wire back and forth.
- DO NOT RE-USE connector on stranded wire. Strip Length Insertion Removal
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>