Danby DDR040EB2WDB Dehumidifier Owner’s Manual

Danby DDR040EB2WDB Dehumidifier

Product Specifications

• Brand: Danby
• Model Number: [Model Number]
• Serial Number: [Serial Number]

Product Usage Instructions

Safety Information

Read and follow all safety instructions provided in the manual before installing or operating the dehumidifier. Save the manual for future reference.

Installation

Ensure the dehumidifier is placed on a flat, stable surface with proper ventilation. Plug it into a grounded electrical outlet.

Operating Instructions

Turn on the dehumidifier using the power button. Set the desired humidity level using the control panel. The dehumidifier will start removing moisture from the air.

Maintenance

• Regularly clean the air filter to ensure efficient operation.
• Empty the water tank when full to prevent overflow. Check for any leaks or unusual noises.

Frequently Asked Questions

Q: How often should I clean the air filter?

A: It is recommended to clean the air filter every 2 weeks for optimal performance.

Q: What should I do if the dehumidifier is not collecting water?

A: Check if the humidity level is set correctly and ensure the unit is placed in a space with sufficient humidity. If the issue persists, contact customer service for assistance.

Welcome

• Welcome to the Danby family. We are proud of our quality products and we believe in dependable service.
• We suggest that you read this owner’s manual before plugging in your new appliance as it contains important operation information, safety information, troubleshooting, and maintenance tips to ensure the reliability and longevity of your appliance.
• Visit www.Danby.com to access self-service tools, FAQs, and much more. For additional assistance call 1-800-263-2629.
• Note the information below; you will need this information to obtain service under warranty.
• You must provide the original purchase receipt to validate your warranty and receive service.
• Model Number: _____
• Serial Number: _____
• Date of Purchase: ___

Need Help?

• Before you call for service, here are a few things you can do to help us serve you better.

Read this owner’s manual:

• It contains instructions to help you use and maintain your appliance properly.

If you receive a damaged appliance:

• Immediately contact the retailer or builder that sold you the appliance.

Save time and money:

• Check the troubleshooting section at the end of this manual before calling. This section will help you solve common problems that may occur.

Important Safety Information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

WARNING:

• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Care should be taken when using the appliance in a room with the following persons: infants, children, elderly people, and people not sensitive to humidity.
• Servicing shall only be performed as recommended by the equipment manufacturer.
• Maintenance and repair requiring the assistance of other skilled personnel shall be carried out under the supervision of a person competent in the use of flammable refrigerants.
• You should never try to take apart or repair the appliance by yourself.
• DO NOT modify the length of the power cord or use an extension cord to power the appliance.
• If the power supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
• Do not operate the appliance with a damaged cord or plug. Discard the appliance or return it to an authorized service facility for examination and/or repair.
• DO NOT share a single outlet with other electrical appliances. Improper power supply can cause fire or electrical shock.
• Do not run the power cord under the carpeting. Do not cover the power cord with throw rugs, runners, or similar coverings.
• Do not route the power cord under furniture or appliances. Arrange the power cord away from high-traffic areas so that it will not be tripped over. Do not place heavy objects on the power cord and take care that the cord is not compressed.
• In a thunderstorm, the power must be cut to avoid damage to the appliance due to lightning.
• Do not insert or pull out the power cord with wet hands.
• Before cleaning or other maintenance, the appliance must be disconnected from the power supply.
• Disconnect the power if strange sounds, smells, or smoke come from the appliance.
• The rating plate is located on the rear or side of the appliance and contains electrical and other technical data specific to this appliance. Do not exceed the rating of the power outlet or connection device.
• Flammable refrigerant R32 is used within this appliance.
• When maintaining or disposing of the appliance, the refrigerant (R32) shall be recovered properly and shall not discharge into the air directly.
• Compliance with national gas regulations shall be observed.
• Any person who is involved with working on or breaking into a refrigerant circuit should hold a currently valid certification from an industry-accredited assessment authority, which authorises their competency to handle refrigerants safely per an industry recognised assessment specification.
• Examples of such working procedures are: breaking into the refrigerant circuit, opening sealed components, and opening of ventilated enclosures.
• No open fire or device like a switch that may generate a spark or arcing shall be near the appliance to avoid causing ignition of the flammable refrigerant used.
• Please follow the instructions carefully to store or maintain the appliance to prevent mechanical damage from occurring.
• The appliance shall be stored in a room without continuously operating ignition sources such as open flames or an operating gas heater, or ignition sources such as an operating electric heater close to the appliance.
• Do not place the appliance near a heat source.
• Do not install the appliance in a location that may be exposed to combustible gas. If combustible gas accumulates around the unit, it may cause fire. Do not use the unit near flammable gas or combustibles, such as gasoline, benzene, thinner, etc.
• Do not pierce or burn the refrigerant circuit. Be aware that refrigerants may not contain an odor.
• Do not use means to accelerate the defrosting process or to clean the appliance other than those recommended by the manufacturer.
• Keep ventilation openings clear of obstruction. Do not cover the intake or exhaust openings with cloths or towels.
• The appliance shall be stored to prevent mechanical damage from occurring.
• The appliance shall be stored in a well-ventilated area where the room size corresponds to the room area as specified for operation.
• Turn off the appliance when not in use.
• Do not drink or use the water drained from the appliance.
• Do not take the water bucket out during operation.
• Place the appliance on a level, sturdy floor.
• Never insert your finger or other foreign objects into grills or openings. Take special care to warn children of these dangers.
• Do not climb up on or sit on the unit.
• Always insert the filters securely. Clean the filter once every two weeks.
• If water enters the unit, turn the unit off and disconnect the power, contact a qualified service technician.
• Do not place flower vases or other water container on top of the unit.
• If the appliance is knocked over during use, turn off the unit and unplug it from the main power supply immediately. Visually inspect the unit to ensure there is no damage.
• If you suspect the unit has been damaged, contact a technician or customer service for assistance.
• To reduce the risk of fire or electric shock, do not use this appliance with any solid-state speed control device.
• The appliance shall be installed under national wiring regulations.
• Be sure the appliance is properly grounded. To minimize shock and fire hazards, proper grounding is important. The power cord is equipped with a three-prong grounding plug for protection against shock hazards. Your unit must be used in a properly grounded wall receptacle. If the wall receptacle you intend to use is not adequately grounded or protected by a time delay fuse or circuit breaker, have a qualified electrician install the proper receptacle. Please refer to the nameplate for the electrical data.
• Do not operate the appliance in a wet room such as a bathroom or laundry room. Do not operate in places where water may splash onto the appliance.
• The circuit board (PCB) is designed with a fuse to provide overcurrent protection. Specifications of the fuse are printed on the circuit board, such as T 3.15A/250V (or 350V), etc.

1. Transport of equipment containing flammable refrigerants: See transport regulations.

2. Marking of equipment using signs : See local regulations.

3. Disposal of equipment using flammable refrigerants: See national regulations.

4. Storage of equipment/appliances: The storage of equipment should be under the manufacturer’s instructions.

5. Storage of packed (unsold) equipment: Storage package protection should be constructed such that the mechanical damage to the equipment inside the package will not cause a leak of the refrigerant charge.

   • The maximum number of pieces of equipment permitted to be stored together will be determined by local regulations.

6. Information on servicing

7. Checks to the area: Before beginning work on systems containing flammable refrigerants, safety checks are necessary to ensure that the risk of ignition is minimized. For repair to the refrigerating system, the following precautions shall be complied with before conducting work on the system.

8. Work procedure: Work shall be undertaken under a controlled procedure to minimize the risk of flammable gas or vapor being present while the work is being performed.

9. General work area: All maintenance staff and others working in the local area shall be instructed on the nature of work being carried out. Work in confined spaces shall be avoided. The area around the work space shall be sectioned off. Ensure that the conditions within the work area have been made safe by removing all flammable material.

10. Checking for the presence of refrigerant: The area shall be checked with an appropriate refrigerant detector before and during work to ensure the technician is aware of potentially flammable atmospheres. Ensure that the leak detection equipment being used is suitable for use with flammable refrigerants, i.e. non-sparking, adequately sealed, or intrinsically safe.

11. Presence of fire extinguisher: If any hot work is to be conducted on the refrigeration equipment or any associated parts, appropriate fire extinguishing equipment shall be available to hand. Have a dry powder or C02 fire extinguisher adjacent to the work area.

12. No ignition sources: No person carrying out work concerning a refrigeration system that involves exposing any pipe work that contains or has contained flammable refrigerant shall use any sources of ignition in such a manner that it may lead to a risk of fire or explosion. All possible ignition sources including cigarette smoking, should be kept sufficiently far away from the site of installation, repair, removal, and disposal during which flammable refrigerant can be released into the surrounding space. Before work takes place, the area around the equipment is to be surveyed to make sure there are no flammable hazards or ignition risks. No smoking signs shall be displayed.

13. Ventilated area: Ensure that the area is in the open or that it is adequately ventilated before breaking into the system or conducting any hot work. A degree of ventilation shall continue during the period
    that the work is carried out. The ventilation should safely disperse any released refrigerant and expel it externally into the atmosphere.

14. Checks to the refrigeration equipment: Where electrical components are being changed, they shall be fit for the purpose and to the correct specification. At all times the manufacturer’s maintenance and service guidelines shall be followed. If in doubt, consult the manufacturer’s technical department for assistance. The following checks shall be applied to installations using flammable refrigerants:

  * The actual refrigerant charge size is under the room size within which the refrigerant-containing parts are installed.
  * The ventilation machinery and outlets are operating adequately and are not obstructed.
  * If an indirect refrigerating circuit is being used, the secondary circuit shall be checked for the presence of refrigerant.
  * Markings on the equipment continue to be visible and legible. Markings and signs that become illegible must be corrected.
  * Refrigeration pipes or components are installed in a position where they are unlikely to be exposed to any substance that may corrode refrigerant-containing components unless the components are constructed of materials that are inherently resistant to being corroded or are suitably protected against being corroded.
9. Checks to electrical devices: Repair and maintenance of electrical components shall include initial safety checks and component inspection procedures. If a fault exists that could compromise safety, then no electrical supply shall be connected to the circuit until it is satisfactorily dealt with. If the fault cannot be corrected immediately but it is necessary to continue operation, an adequate temporary solution shall be used. This shall be reported to the owner of the equipment so all parties are advised. Initial safety checks shall include:
  * That capacitors are discharged. This shall be done safely to avoid the possibility of sparking.
  * That no live electrical components and wiring are exposed while charging, recovering, or purging the system.
  * That there is continuity of earth bonding.

7. Repairs to sealed components
8. During repairs to sealed components, all electrical supplies shall be disconnected from the equipment being worked upon before any removal of sealed covers, etc. If it is necessary to have an electrical supply to equipment during servicing then a permanently operating form of leak detection shall be located at the most critical point to warn of a potentially hazardous situation.
9. Particular attention shall be paid to the following to ensure that by working on electrical components, the casing is not altered in such a way that the level of protection is affected. This shall include:

  * Damage to cables, excessive number of connections, terminals not made to original specification, damage to seals, incorrect fitting of glands, etc.
  * Ensure the apparatus is mounted securely.
  * Ensure that seals or sealing materials have not degraded such that they no longer serve the purpose of preventing the ingress of flammable atmospheres. Replacement parts shall be following the manufacturer’s specifications.
  *  **Note:** The use of silicon sealant may inhibit the effectiveness of some types of leak detection equipment. Intrinsically safe components do not have to be isolated before working on them.

8. Repair to intrinsically safe components
   • Do not apply any permanent inductive or capacitance loads to the circuit without ensuring that this will not exceed the permissible voltage and current permitted for the equipment in use.
   • Intrinsically safe components are the only types that can be worked on while living in the presence of a flammable atmosphere. The test apparatus shall be at the correct rating.
   • Replace components only with parts specified by the manufacturer. Other parts may result in the ignition of refrigerant in the atmosphere from a leak.
9. Cabling
   • Check that cabling will not be subject to wear, corrosion, excessive pressure, vibration, sharp edges, or any other adverse environmental effects.
   • The check shall also take into account the effects of aging or continual vibration from sources such as compressors or fans.
10. Detection of flammable refrigerants
    • Under no circumstances shall potential sources of ignition be used in the search for or detection of refrigerant leaks. A halide torch or any other detector using a naked flame shall not be used.
    • The following leak detection methods are deemed acceptable for systems containing flammable refrigerants.
    • Electronic leak detectors shall be used to detect flammable refrigerants but the sensitivity may not be adequate or may need recalibration.
    • Detection equipment shall be calibrated in a refrigerant-free area. Ensure that the detector is not a potential source of ignition and is suitable for the refrigerant used.
    • Leak detection equipment shall be set at a percentage of the LFL of the refrigerant and shall be calibrated to the refrigerant employed and the appropriate percentage of gas (25% maximum) is confirmed.
    • Leak detection fluids are suitable for use with most refrigerants but the use of detergents containing chlorine shall be avoided as the chlorine may react with the refrigerant and corrode the copper or pipe-work.
    • If a leak is suspected, all naked flames shall be removed or extinguished.
    • If a leakage of refrigerant is found which requires brazing, all of the refrigerant shall be recovered from the system or isolated through shut-off valves in a part of the system remote from the leak.
    • Removal and evacuation shall be in according with the removal and evacuation section.
11. Removal and evacuation
    • When breaking into the refrigerant circuit to make repairs or for any other purpose conventional procedures shall be used. However, the best practice must be followed since flammability is a consideration.
    • The following procedures shall be adhered to:
    • safely remove refrigerant following local and national regulations;
    • purge the circuit with inert gas;
    • evacuate (optional for A2L);
    • purge again with inert gas (optional for A2L);
    • open the circuit by cutting or brazing.
    • The refrigerant charge shall be recovered into the correct recovery cylinders. The system shall be flushed with OFN to render the unit safe.
    • This process may need to be repeated several times. Compressed air or oxygen shall not be used for purging refrigerant systems.
    • For appliances containing flammable refrigerants, refrigerant purging shall be achieved by breaking the vacuum in the system with oxygen-free nitrogen and continuing to fill until the working pressure is achieved, then venting to the atmosphere, and finally pulling down to a vacuum (optional for A2L). This process shall be repeated until no refrigerant is within the system (optional for A2L).
    • When the final oxygen-free nitrogen charge is used, the system shall be vented down to atmospheric pressure to enable work to take place.
    • Ensure that the outlet for the vacuum pump is not close to any potential ignition sources and that ventilation is available.
12. Charging procedures
    • In addition to conventional charging procedures, the following requirements shall be followed.
    • Ensure that contamination of different refrigerants does not occur when using charging equipment.
    • Hoses or lines shall be as short as possible to minimize the amount of refrigerant contained in them.
    • Cylinders shall be kept in an appropriate position according to the instructions.
    • Ensure that the refrigeration system is earthed before charging the system with refrigerant.
    • Label the system when charging is complete, if not already labeled.
    • Extreme care shall be taken not to overfill the refrigeration system.
    • Before recharging the system it shall be pressure tested with OFN. The system shall be leak tested on completion of charging but before commissioning. A follow-up leak test shall be carried out before leaving the site.
13. Decommissioning
    • Before carrying out this procedure, the technician must be completely familiar with the equipment in all its details. It is recommended good practice that all refrigerants are recovered safely.
    • Before the task is carried out, an oil and refrigerant sample shall be taken in case analysis is required before the re-use of reclaimed refrigerant. Electrical power must be available before the task is commenced.
    • a) Become familiar with the equipment and its operation.
    • b) Isolate system electrically.
    • c) Before attempting the procedure ensure that:
    • mechanical handling equipment is available if required for handling refrigerant cylinders;
    • all personal protective equipment is available and being used correctly;
    • the recovery process is supervised at all times by a competent person;
    • recovery equipment and cylinders conform to the appropriate standards.
    • d) Pump down the refrigerant system, if possible.
    • e) If a vacuum is not possible, make a manifold so that refrigerant can be removed from various parts of the system.
    • f) Make sure that the cylinder is situated on the scales before recovery takes place.
    • g) Start the recovery machine and operate it under instructions.
    • h) Do not overfill cylinders. (No more than 80% volume liquid charge).
    • i) Do not exceed the maximum working pressure of the cylinder, even temporarily.
    • j) When the cylinders have been filled correctly and the process completed, make sure that the cylinders and the equipment are removed from the site promptly and all isolation valves on the equipment are closed off.
    • k) Recovered refrigerant shall not be charged into another refrigeration system unless it has been cleaned and checked.
14. Labeling
    • Equipment shall be labeled stating that it has been decommissioned and emptied of refrigerant. The label shall be dated and signed. Ensure that there are labels on the equipment stating the equipment contains flammable refrigerant.
15. Recovery
    • When removing refrigerant from a system, either for servicing or decommissioning, it is recommended good practice that all refrigerants are removed safely.
    • When transferring refrigerant into cylinders, ensure that only appropriate refrigerant recovery cylinders are employed. Ensure that the correct number of cylinders for holding the total system charge is available.
    • All cylinders to be used are designated for the recovered refrigerant and labeled for that refrigerant (i.e. special cylinders for the recovery of refrigerant).
    • Cylinders shall be complete with pressure relief valves and associated shut-off valves in good working order.
    • Empty recovery cylinders are evacuated and, if possible, cooled before recovery occurs.
    • The recovery equipment shall be in good working order with a set of instructions concerning the equipment that is at hand and shall be suitable for the recovery of flammable refrigerants. In addition, a set of calibrated weighing scales shall be available and in good working order. Hoses shall be complete with leak-free disconnect couplings and in good condition. Before using the recovery machine, check that it is in satisfactory working order, has been properly maintained, and that any associated electrical components are sealed to prevent ignition in the event of a refrigerant release. Consult the manufacturer if in doubt.
    • The recovered refrigerant shall be returned to the refrigerant supplier in the correct recovery cylinder, and the relevant Waste Transfer Note arranged.
    • Do not mix refrigerants in recovery units especially not in cylinders. If compressors or compressor oils are to be removed, ensure that they have been evacuated to an acceptable level to make certain that flammable refrigerant does not remain within the lubricant. The evacuation process shall be carried out before returning the compressor to the suppliers.
    • Only electric heating of the compressor body shall be employed to accelerate this process.
    • When oil is drained from a system, it shall be carried out safely.
    • Non-duct connected appliances containing A2L refrigerants with the supply and return air openings in the conditioned space may have the body of the appliance installed in open areas such as false ceilings not being used as return air plenums, as long as the conditioned air does not directly communicate with the air of the false ceiling.
    • WARNING: Before performing any electrical or wiring work, turn off the main power to the system.
    • Note: The cographs are for explanation purposes only. Your appliance may be slightly different. The actual shape shall prevail.

OPERATING INSTRUCTIONS

CASTER INSTALLATION

The casters and power cord can be found inside the water bucket.

1. Remove the bucket from the appliance and remove the bucket cover.
2. Remove the casters and power cord from the water bucket.
3. Replace the bucket cover and replace the bucket inside the appliance.
4. Tilt the appliance to a 45° angle. Push the casters into the bottom of the appliance until they click. Ensure the ring around the caster is flush against the bottom of the appliance.

OPERATION

• Place the dehumidifier on a smooth, level floor that is strong enough to support the appliance with a full bucket of water.
• Do not place the dehumidifier on carpeting as this can block air flow around the appliance.
• Do not force casters to move over carpeting as the appliance can become unbalanced and spill water.
• To maintain efficiency, operate the appliance in an enclosed area. Keep nearby doors and windows closed.
• Any time the appliance is placed on its back or side, it must be allowed to stand upright for 6 hours before plugging in to avoid damage to internal components.
• Maintain a minimum clearance of 45 cm (18 inches) on all sides of the appliance to allow for proper air circulation.
• The recommended ambient operating temperature is between 5°C (41°F) and 32°C (90°F).
• The recommended ambient operating humidity is between 30 – 90%.
• The default humidity setting is 50% and low fan speed. Depending on humidity conditions the dehumidifier may not start automatically under the default setting.
• This means the humidity in the surrounding air is less than 50%. Press the down button to lower the set humidity until the set humidity is lower than the ambient humidity.
• For optimal performance, ensure that the humidity setting is 10% lower than the ambient humidity. It is normal for the ambient humidity to vary up to 5% above or below the set humidity.
• It is recommended in normal conditions to set the humidity between 40-45%.
• It is normal for the dehumidifier to exhaust warm air from the top.

CONTROL PANEL

1. Filter Button and Indicator   Light: The filter light will illuminate when the filter needs to be cleaned, approximately every 250 hours of operation. Press the filter button once the filter has been cleaned to return to regular functioning.
2. Fan Button and Indicator Light: Press to set the fan speed to low or high. The light will illuminate at high fan speed and will turn off at low fan speed.
3. Display: Shows the actual room humidity to a ± 5% accuracy in a range of 35% to 80% relative humidity. Displays selection when programming humidity or timer.
4. Up and Down Buttons: The humidity level can be set within a range of 35% to 80% relative humidity in 5% increments using these buttons. For drier air, press the down button and set it to a lower percentage value. For more damp air, press the up button and set a higher percentage value.
5. Timer Button and Indicator Lights: Press to initiate the auto-start and auto-stop feature. Set a start or stop time from 0.0 to 24 hours using the up and down buttons.
6. Continuous   Mode: To reach continuous mode, press the down button until CO shows on the display. This setting will disregard the ambient humidity and will run the compressor continu-ously to reach the driest conditions possible.
7. Full Bucket Indicator Light: When the bucket is full or incorrectly positioned the full bucket light will turn on and remain on until the bucket is emptied or correctly re-positioned. The compressor and fan motor operation will stop. When the bucket is emptied or correctly repositioned the dehumidifier will resume operation automatically. It may take 2-3 minutes before operating conditions resume.
8. Power Button: Use this button to turn the appliance on or off.

TIMER FUNCTION

Auto Off Function

1. When the appliance is turned on, press the timer button to activate the auto-stop timer. The auto-stop light will illuminate.
2. Press the up and down buttons to change the set time in 0.5-hour increments up to 10 hours and then in 1-hour increments up to 24 hours.
3. 5 seconds after setting the time for the timer, the Timer symbol will illuminate to indicate the timer is now active.
   • Auto On Function
4. When the appliance is turned off, press the timer button to activate the auto-start timer. Set the time as per the instructions above. 5 seconds after setting the time for the timer, the Timer symbol will illuminate to indicate the timer is now active.

• Turning the appliance on or off at any time or changing the timer setting to 0.0 will cancel the timer settings.

MEMORY AND AUTO RESTART SETTINGS

• Each time the appliance is disconnected or reconnected or in the event of a power failure, the appliance will default to the last program setting that was used.
• If the appliance shuts off unexpectedly due to a power failure, it will restart with the previous settings automatically once power resumes.

AUTOMATIC DEFROST

• If the appliance is operating in an environment where the ambient temperature is very cold, frost may form on the evaporator coils.
• The compressor will cycle off but the fan will continue to run until the frost melts. An error code may show on the control panel display.
• When the frost has melted, the compressor function will resume and the appliance will return to regular operation.
• To ensure frost does not form on the evaporator coils, ensure the ambient temperature around the appliance is at a comfortable level. Higher ambient temperature will also help to remove humidity from the air.

WATER REMOVAL

• There are two ways to remove collected water from the appliance.

Water Bucket

• The dehumidifier will automatically collect condensed water in the water bucket. When the bucket is full or displaced inside the unit, the float actuator inside the bucket breaks contact with the safety switch.
• The compressor will shut down, preventing moisture from being condensed. The fan will continue to run for approximately 2-3 minutes.
• Water may drip onto the base of the appliance and the floor. Make sure to protect the flooring when emptying the water bucket.
• Never tamper with or attempt to defeat the water level float system. Proper installation of the water bucket is crucial in maintaining reliable operation.
• To empty the bucket, gently remove it from the appliance by gripping both sides and pulling outward. Be cautious when removing the bucket, it will be full and can be heavy.
• Do not place the water bucket directly on the floor. The bottom of the bucket is uneven and it will fall over and spill water.
• Empty the bucket and replace it with the appliance. The dehumidifier will not function without the bucket installed.
• The bucket should be cleaned every few weeks to prevent mold growth. Only use a mild detergent to clean the bucket; do not use harsh chemicals or bleach.

Continuous Drain

• Water can be removed from the appliance using the continuous drain and the provided drain hose.
• Before using any automatic drain functions, check that all drain ports are clean and free of debris. There are either one or two drain ports inside the bucket compartment of the appliance, remove the bucket to see them.
• There are one or two drain ports on the back of the appliance where the drain hoses attach. All drain ports should be cleaned with a pipe cleaner before use.
• Note: Do not clean the drain ports with anything more rigid than a pipe cleaner as this can damage the appliance.
• Note: If the drain ports are clogged or dirty it can cause water to leak from the bottom of the appliance.
• Remove the cover from the continuous drain outlet and attach the provided continuous drain connector and the provided drain hose. Direct the other end of the hose to a bucket or floor drain.
• Ensure that the hose is not bent and goes straight down from the back of the appliance. The continuous drain is only activated by gravity so any bends or upward motion in the hose will stop the water from draining.
• Note: A garden hose can also be used as a continuous drain hose. The garden hose should be cut so that it is no more than 1.8 m (6 feet) long.
• If the drain hose is too long water may not drain completely which can lead to stagnant water and mildew build up inside the hose.

CARE & MAINTENANCE

AIR FILTER

• The filter indicator will illuminate after 250 hours of use, indicating that the filter should be cleaned.
• Remove the filter from the back of the appliance. Use a vacuum to remove dust from the filter or wash with warm water and mild detergent.
• Ensure the filter is completely dry before replacing it in the appliance. Press the filter button to reset the filter indicator.
  Note: Do not operate the appliance without the air filter installed.

LONG TERM STORAGE

• Ensure that the inside of the appliance is dry before storing it for the off-season to help avoid the growth of mold or mildew.
• Ensure the filter is clean and dry. Secure the power cord with the power cord strap as per the image below. Store the appliance upright and covered in a dry location.

CLEANING

• To avoid possible electric shock, ensure that the appliance is unplugged before performing any cleaning or maintenance.
• The outside of the appliance can be wiped clean with a soft cloth or with a lukewarm, damp cloth if necessary.
• Do not use gasoline, benzene, thinner, or any other chemicals to clean this appliance as these substances can cause damage to the finish and deformation of plastic parts.
• Never pour water directly onto the appliance as this will cause deterioration of electrical components and wiring insulation.
• Ensure that the drain ports on the interior of the appliance and the drain ports on the back of the appliance are free of dirt and calcium buildup.

ERROR CODES

• EH – humidity sensor fault
• E1 or E2 – temperature sensor fault
• E3 – Gas leakage

DISPOSAL

• This appliance may not be treated as regular household waste, it should be taken to the appropriate waste collection point for recycling of electrical components.
• Check for local regulatory compliance regarding the approved and safe disposal of this appliance.

TROUBLESHOOTING

Danby Consumer Care: 1-800-263-2629

Hours of operation:

• Monday to Thursday 8:30 am – 6:00 pm Eastern Standard Time Friday 8:30 am – 4:00 pm Eastern Standard Time
• Information in this manual is subject to change without notice.

the wall outlet

•        Blown fuse or circuit breaker

•        Ambient humidity is lower than the set humidity

•        Bucket is full or is not in the proper position

Insufficient dehumidifying| •        Air filter is dirty

•        Blocked airflow

•        Appliance size is too small for the application

•        Ambient humidity is lower than the set humidity

Noise| •        Air filter is dirty

•        Bucket is not in the proper position

•        Floor surface is not level

Odors| •        Formation of mold or mildew on internal wet surfaces

•        Place an algaecide tablet in the water bucket

Water on floor| •        Hose connection is loose

•        Drain cover has been removed

Frost build-up| •        When ambient temperature is below 5°C (41°F) frost may form

•        Switch the appliance to fan-only mode until the frost melts

LIMITED WARRANTY

LIMITED “CARRY IN” WARRANTY

• This quality product is warranted to be free from the manufacturer’s defects in material and workmanship, provided that the unit is used under the normal operating conditions intended by the manufacturer.
• This warranty is available only to the person to whom the unit was originally sold by Danby Products Limited (Canada) or Danby Products Inc. (U.S.A.) (hereafter “Danby”) or by an authorized distributor of Danby and is non-transferable.

TERMS OF WARRANTY

Plastic parts are warranted for thirty (30) days from the date of purchase, with no extensions provided First 24 months During the first twenty-four (24) months, any functional parts of this product found to be defective, will be repaired or replaced, at warrantor’s option, at no charge to the original purchaser.

To obtain service

• Contact the dealer where the unit was purchased, or contact the nearest authorized Danby service depot, where service must be performed by a qualified service technician. If service is performed on the unit by anyone other than an authorized service depot, all obligations of Danby under this warranty shall be void.
• It is the responsibility of the purchaser to transport the appliance to the nearest authorized service depot.
• Transportation charges to and from the service location are not protected by this warranty and are the responsibility of the purchaser.
• Nothing within this warranty shall imply that Danby will be responsible or liable for any spoilage or damage to food or other contents of this appliance, whether due to any defect of the appliance, or its use, whether proper or improper.

EXCLUSIONS

Save as herein provided, by Danby, there are no other warranties, conditions, representations, or guarantees, express or implied, made or intended by Danby or its authorized distributors, and all other warranties, conditions, representations, or guarantees, including any warranties, conditions, representations or guarantees under any Sale of Goods Act or like legislation or statute is hereby expressly excluded. Save as herein provided, Danby shall not be responsible for any damages to persons or property, including the unit itself, howsoever caused or any consequential damages arising from the malfunction of the unit, and by the purchase of the unit, the purchaser does hereby agree to indemnify and hold harmless Danby from any claim for damages to persons or property caused by the unit.

GENERAL PROVISIONS

No warranty or insurance herein contained or set out shall apply when damage or repair is caused by any of the following.

1. Power failure.
2. Damage in transit or when moving the appliance.
3. Improper power supply such as low voltage, defective house wiring, or inadequate fuses.
4. Accident, alteration, abuse, or misuse of the appliance such as inadequate air circulation in the room or abnormal operating conditions (ie. extremely high or low room temperature).
5. Use for commercial or industrial purposes (ie. If the appliance is not installed in a domestic residence).
6. Fire, water damage, theft, war, riot, hostility, acts of God such as hurricanes, floods, etc.
7. Service calls result in customer education.
8. Improper Installation (ie. Building-in of a free-standing appliance or using an appliance outdoors that is not approved for outdoor application, including but not limited to garages, patios, porches, or anywhere that is not properly insulated or climate controlled).

Pre proper purchase our augurized service defies aims; retain bills of sale. If warranty service is required, present.

Warranty Service Carry-In

• Danby Products Limited
• PO Box 1778, Guelph, Ontario, Canada NIH 6Z9
• Telephone:519-837-0920 FAX: 519-837-0449 1-800-263-2629 04/17
• Danby Products Inc.
• PO Box 669, Findlay, Ohio, U.S.A. 45840
• Telephone:419-425-8627 FAX: 419-425-8629
• Danby Products Limited, Guelph, Ontario, Canada NIH 6Z9
• Danby Products Inc. Findlay, Ohio, U.S.A. 45840
• www.danby.com

Documents / Resources

| Danby DDR040EB2WDB Dehumidifier [pdf] Owner's Manual
DDR040EB2WDB Dehumidifier, DDR040EB2WDB, Dehumidifier
---|---

References

• Danby® the Appliance Specialists | Canada

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>