MILESEEY DP20 PRO Series Laser Distance Meter User Guide
- July 25, 2024
- MILESEEY
Table of Contents
DP20 PRO Series Laser Distance Meter
“`html
Specifications:
- Product Name: DP20 PRO Laser Distance Meter
- Model: DP20 PRO
- Battery Type: 1000mAh rechargeable Li-ion battery
- Maximum Output: 1mW
- Wavelength: 630-670nm
- Material: Aviation aluminum alloy
- Display: Back-lit OLED display
- Manufacturer: Shenzhen Mileseey Technology Co., Ltd.
Product Usage Instructions:
1. Safety Instructions:
Before using the DP20 PRO Laser Distance Meter, please read and
follow these safety instructions:
-
Do not stare into the laser beam.
-
Avoid shooting the laser at others.
-
Avoid using the product in explosive or corrosive
environments. -
Keep the product away from medical devices and airplanes.
2. Operation:
To operate the DP20 PRO Laser Distance Meter:
- Read the user manual carefully.
- Ensure the device is fully charged before use.
- Press the power button to turn on the device.
- Aim the laser at the target point you want to measure.
- Press the measurement button to obtain the distance
measurement.
3. Display and Functions:
The back-lit OLED display provides clear visibility of
measurement data and signs. The device features multiple buttons
with a logical layout for easy operation. The digital angle sensor
allows real-time reading of angles for accurate measurements.
4. Battery:
The DP20 PRO comes with a built-in 1000mAh rechargeable Li-ion
battery. Ensure the battery is charged using the provided cable for
uninterrupted usage.
5. Maintenance:
After each use, clean the lens and body of the device with a
soft, dry cloth to maintain optimal performance.
Frequently Asked Questions (FAQ):
Q: Can I use the DP20 PRO Laser Distance Meter near medical
devices?
A: No, please avoid using the product near medical devices to
prevent interference.
Q: How do I dispose of the used batteries?
A: Collect used batteries and dispose of them at designated
waste stations following national regulations.
“`
TM
6TFST(VJEF
Laser Distance Meter
D 20 RO Series uic Start
roduct O er iew
Than for you for purchasing Mileseey Laser distance meter. Please read the
user manual carefully before operation.
The DP20 P O series is an ex uisite bilateral laser distance measurer whose
exterior redefines the concept of design the cleverly designed buttons render
an appearance as simple as a ruler. ith built-in upgraded and patented
distance-measuring technology that enable more accurate data of measurement,
it meets various measurement needs of people engaged in house renovation,
house decoration, interior design, exhibition design, outdoor advertising
design, crafting, home soft furnishing and more.
Made of aviation aluminum alloy, the DP20 P O series is characterized by its
elegance, smoothness, and durability. The user-favored multiple buttons with
logical layout enables
uic and easy operation. D bac -lit OLED display illuminates numbers and signs
with a distinct resolution. The digital angle sensor allows real-time reading
of the measurement angle and easy horizontal alignment. Than s to the built-in
large capacity 1000m h rechargeable Li-ion battery, DP20 P O series is a more
eco-friendly device with a long using life span.
DP20 P O series carries an expansive collection of functions – real-time angle
display, single measurement, continuous measurement, area measurement,volume
measurement, auto level distance calculation, auto height finding. The DP20 P
O supports both unilateral and bilateral measurements, and the bilateral
measurement overcomes restrictions of irregular spatial structures, enabling
exceptionally e cient and precise distance calculation under complex spatial
conditions. The smallest unit that the device is capable of measuring is
0.001m and the longest measurement range is up to 120m ( 0ft) in the two-way
mode of measuring. The DP20 P O series affords an outstanding measuring
experience with the best uality and performance!
Safety instructions
In order to use this product safely, please read The following instructions
carefully.
EN-01
LASER RADIATION DO NOT STARE INTO BEAM
CLASS 2 CONSUMER LASER PRODUCT
EN 50689:2021
MAXIMUM OUTPUT1mW WAVELENGTH 630-670nm
Shenzhen Mileseey Technology Co., Ltd. FCC ID: 2AEOGDP20PRO
LASER DISTANCE METER Accuracy:±(2.0mm+5×10-5D)
Model:DP20 PRO
www.mileseeytools.com
Battery Type:1000mAh
Made in China
rechargeable Liion battery
Office Add:No.3601 Block A, Tanglang Town Plaza West,Fuguang
Community,Taoyuan Street, Nanshan District, Shenzhen, China
FCC StatementThis device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning
a.The device is categorized into Class 2 laser product. DO NOT stare at laser
directly or shoot at others or it will cause damage to eyes. b. The product is
in accordance with strict standards and regulations in terms of development
and manufacturing, but still can’t entirely exclude possible interference to
other digital devices,and may cause discomfort to human and animals.
Please DO NOT use this product under explosive or corrosive environment.
Please DO NOT use this product near medical devices. Please DO NOT use this
product on the plane.
Disposal Everyone is responsible for environmental protection! It is
prohibited to dispose of used batteries together with household waste;please
collect used batteries to designated waste station. This product must not be
recycled with household waste. Please dispose the product appropriately in
accordance with the national regulations in your country.
Range of Responsibility Mileseey will not be responsible for the damages
caused by improper use below: Using the product without referring to the
instruction; Use of parts from other manufacturers without approval from
Mileseey ; *Carrying out modification or conversion of the product.
Lithium Battery Charging Instructions
This product is built with Lithium rechargeable battery; Please use original
USB cable to charge by connecting to power outlet or computer.
Warning
Laser distance meter may heat up when charging, and it’s normal; It has no
effect on the device performance and service life. If it is not used for a
long time, unplug the charger.
EN-02
on La er i in Len La er ecei in Len
4 / lear on ni Swi c / e ode on
n/ ea re on 1 e ory on
S or ower ar e
i play
La er ar in Len
Line e en a ion ea rin ra Lar e i play/ l e oo Sync
on
on
on
roduct ppearance
1.Rig1h.Rt iLgahsteLraOsne/rOOffnB/OuffttoBnutton
ShortSphorerstsptroessswtiotcshwtiotcthhetoritghhetrsigidhet lsaidserl;aser;
ShortSphorerstsparegsasinagtoairnetroierveetrtiewvoe-wtwaoy-lwasaeyrlaser
emisesimonis.sSiohno.rtSphorerstsptroespsatgoepdaogwendotown to
histohriicsatol rdicaatal .data. 2.
Mi2d.dMleidLdalseeLraLsinereLOine/OOffnB/OuffttoBnutton
ShortSphorerstsptroestsurtno otunr/nooffnth/oeffmthidedmleidladslerlaser ine
alisnaecalsearcvleisaibr lveisriebfleererenfceerefonrceprfoecripserecise
alignamliegntm. ent. 3. Le3ft. LeafsteLraOsne/rOOffnB/OuffttoBnutton
ShortSphroerstsptroesws
titocshwtoitcthetolethftesildeeftlsaisdeer;laSsheorr;tShort
presspargeasisnatgoarienttroierveetrtiwevoe-wtwayo-lawsaeyr leamseisr
seimonis. sion.
ShortSphroerstsptroepssagtoepuapgheisutporhicisatlodriactaal.data.
EN-03
Le La er n/
iddle La er ar in n/
1 i La er n/
La er i in Len La er ecei in Len
Lanyard Hole 1/4 Screw Hole For Tripod
4. Off/Clear Button Long press to turn off the device. Short press to clear
the previous operation or return. 5. Units Switch/Mute Button Short press to
switch units (m/ft/in/'”) Long press to turn on/off beep tone. 6. Mode Button
Short press to switch between measurement functions-single measurement, area
measurement, volume measurement, auto level distance measuring, and auto
height finding. 7. Line segmentation & measuring Short press to enter
segmentation mode. In segmentation mode, short press to set segmenting value
from 1/2 to 1/16. 8. Big Text Display Short press to switch to Big Text
display Long press to turn on/off Bluetooth (Only available on DP20 Pro
Version) 9. On/Measure Button In off state, long press to turn on Short press
to measure. In on state, long press to enter continuous measurement. 10.
Memory Button Short press to save the data Long press to enter history data
saved.
EN-04
Technical Speci cation
odel
ro
an e 1
1
cc racy
1
ne way aila le an e
4
Two way ea re
ne way ea re
Se en a ion 1/ Len iddle La er ar ea
l e oo
Sin le ea re en
on in o ea re en
rea
ol e
ole eldi ance ndin
o ei ndin
n le en or
ra lar e i play ode
Screen i play
L
e ory
e
Two way ea re en re erence
iddle la er line
ne way ea re en re erence
1 Le end iddle la er line i end
ni
/ /in/ in
o ower Swi c o
er 1 o inac i i y
La er la
la
La er Type
n
1
a ery Type
1
rec ar ea le
Li ion a ery
pera in Te pera re
4
F 1 4F
i en ion
14
ei
1
1. Range ange data are referenced to the rear of the
measurer. The Maximum range shall be different according to different
modes.Please refers to the pac age for actual range. 2. ccuracy If measuring
under favorable conditions, such as smooth surface, proper temperature and
indoor lighting, the device is able to wor within certain range as indicated.
If measuring under unfavorable conditions, such as strong light, uneven
surface and improper temperature, Possible measurement error might be
produced. Tips In case of poor sunlight and bad re ection of the ob ect please
use the target plate or re ector.
EN-05
Operation Instructions
Measurement reference hen Initially turned on, the device default
into the single measurement mode in both directions; short press to switch to
the left laser and short press to switch to the right laser.
or bilateral lasers the measurer defaults to only use the middle laser as the
reference
or one way measurement the measur er is built to offer three references to meet different measuring needs. Short press the button to switch to left end middle laser line and right end reference.
Left end
Middle laser line
ight end
ote fter rebooting the reference setting in last booting remains sa ed.
Two way Measurement
Press the (
) button to enter Two-way
single measurement mode (
). Press
the measure button
after aiming at
targets to get distances. The left side length,
right side length, and total length are
displayed on the screen.
20.334 8.232
28.566m
EN-06
Left Side Data ight Side Date
Total Length
One way Measurement
In the mode of two-way single measurement
(
), short press button to switch to
the left side distance measuring laser, or
short press button to switch to the right
side distance measuring laser, which switches
two-way to one-way mode. Press measure
button (
) after aiming at target to get
distance.
3 1 .279m
24.6
eference
Measured Data
ngle
Continuous Measurement
Long press
button to enter
continuous measurement. The device begins
to continuously measure. Short press
button to stop the continuous
measurement; then the screen displays the
current maximum and minimum values.
20 334 min
.
m Min.
20 334 max
.
m Max.
EN-07
Line segmentation&measuring
Long press (
)button to enter line
segmentation measuring mode (
);
short press button (
) or / buttons
to set the sta e out value from 1/2 to 1/16.
The measured values are moving to the left or
right with the indicated arrows. hen moving
to the target position, the N/N segment
appears at the bottom middle of the screen,
this indicates an approach to the target
position. hen ( ) ashes and tic s at the
top centre of the screen, this indicates that
the target position has been reached. Press
the (
) button to loc the current position.
56 46
36
6.000 6.000 36
Laser Mar ing Icon Left/ ight Values
N/N
rea Measurement
Press the
button to select rea
Measurement Mode
; then press the
to confirm. ccording to the
ashing line prompt, press
button
to get the distance of the first line (Length),
and press the
again to get the
distance of the second line ( idth); then the
area value is displayed on the screen.
ote ress / to cycle through the
length width and the circumference
alues.
6.782m
3 1 .279m2
EN-08
eference
The Length of Second Line ( idth)
rea
olume Measurement
Press the
button to select Volume
Measurement Mode
; then press the
to confirm. ccording to the ashing
line prompt, press
button to get the
distance of the first line (Length), and press
the
to get the distance of the second
line ( idth),then press
the again to
get the distance of third line ( eight); then
the volume value is displayed on the screen.
ote ress / to cycle through the
length width and height measurement
alues.
3.222m
4 1 .857m3
eference
The Length of Third Line ( eight)
Volume
uto Le el
Press
button to select uto Level
Measurement Mode
; then press
to confirm. ccording to the ashing
line prompt, press
button to measure,
and the hypotenuse length will be displayed
on the screen and then the horizontal
distance will be calculated, and the tilt angle
will be also displayed on the screen.
ote ress / to cycle through the tilt angle the hypotenuse length and the hori ontal distance.
EN-09
49.2
2 .779m
eference
ngle
orizontal Length
uto eight
Press
button to select uto eight
Measurement Mode
; then press
to confirm. ccording to the ashing
line prompt, press
button to get the
length of the first line, and press the
again to get the length of the second line;
then the vertical distance between the two
points will be displayed on the screen.
otes 1. The auto height function can only be used in one way laser
measurement. 2. ress / to cycle through the angle between two lines the length
of
rst line and the length of the second line.
24.6
2 .235m
eference ngle
Vertical eight
Memory
Short press
button to save the current
data. Long press
to enter the memory;
press / to turn on the previous and next
page, and press button to go through the
current history of measurement sides or
angles; then press
button to exit the
history. The saved measurement result data
will be displayed from the most recent time to
the furthest time.
ote 20 sets of measurement results can be sa ed.
EN-10
1 3.222m
4 1 .857m3
Serial Number Segment length
Volume
Big Text Display Mode
Short press the
button to switch into
Big Text Display Mode, and press the
button again to exit the extra-large
display mode.
ote The extra large display mode can only be applied in a single measurement.
45.588m
Bluetooth Connection
Only a ailable on D 20pro ersion
Measuring De ice
Long press the Big Text button
, and if
the Bluetooth connectivity icon
appears
without a cross, it means the Bluetooth
successfully turns on. If it appears with a cross,
it means the Bluetooth turns off.
Smart hone nd
Turn on the Bluetooth on your phone, and then you ust open the Smart life pp
on your phone, and clic add device. Usually the app will automatically add the
laser measure. nd then you’ll see the s etching app is successfully connected
to the laser measure.
There is a real time data synchronization between the laser measure and the
app, which means when you ac uire a measured data, it’ll be automatically
transferred to the app.
ote 1. s the bluetooth function involves the use of a s etching app, users
need to download the “Smart Life” pp in advance.
EN-11
2. To erase Bluetooth setting of DP20 Pro. Upon starting up, long-press the
CL R/O button plus the T/T button simultaneously, and the device will power
off after successful erasure.
Download
rror Code
ll errors or failures will be shown as codes. The following table explains the meaning of codes and solutions.
Code Cause
204 error n
208
Excessive n
Corrective Measure mn
P
n
220 L
n
too weak
255 m
n
n
m
n
256 n n
Out of the
261 n
m
mn
500
H error
n
m
m n-
n
n
n m
mn
n m
m n n
EN-12
Copyrights
The product specifications are sub ect to change without notice,and all final
interpretation rights are reserved by Mileseey Technology Co.,Ltd., and ll
trademar s, product images, technical parameters are properties of Mileseey
Technology Co.,Ltd., and ll rights reserved.
Contact us
Mileseey technology(US) Inc.
AO A
E
n
Un
11 L V NV 1 0
W
m
n
m
m
E-m
m
m
M nn
MILESEE has started researching, developing and manufacturing uality optical products including laser distance measure, laser level, golf rangefinder,and binoculars since 200 . ocusing on development, researching and manufacturing for over 12 years, we strive to provide you with premium ualified products and satisfying customer service to ma e your life easier and smarter.
Warranty
0-Day return and refund guarantee, 12-Month warranty, lifetime techni ue
support by MILESEE . Please feel free to reach us with any concerns . Email:
service mileseey.com.
e strive to reply to you within 2 hours.
EN-13
FCC Statement:
T
m
1
Operation is subject to the following two conditions:
1 T
m n
n
n n
n n
n
n
n
m
n
m m
nn n
NOTE:
T
mn
n
n n
m
m
n
1
T
m
n
n
n n
m n
n n
n
n
n T
mn n
n n
n n
n nn
n
n
n
n
n m
m
n
n
mm n n
H
n
n
n
n
n
n
n
n
I
mn
m
n
n
n
n
n
mn
nn
mn
n n
n-
n
n
n m
n m
—
n
n
n nn
–In mn n
n
n
— nn
mn n n
n
n m
nn
— n
n
n
TV n n
MODIFICATION: An n
m
–
n n
n
Mileseey technology(US) Inc. ùùdóýùù)ÖýùùVÖ ©ýÖ^© Website: www.mileseey.net
ýýýýó )Öýóýýýýó Made in China V°%d ;D%)d<%d
References
- Range finder-Laser measurement-Night vision-Thermal Imaging-MILESEEY
- Mileseey Tools | Thermal Cameras | Laser Measures – Mileseeytools
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>