Juno Connect Wafer User Guide

: June 6, 2024
: Juno

Table of Contents

Juno Connect® Wafer User Guide for Google Home
Set up your devices
How to control the device
Additional ways to control the device
Set up a Name for your device
Delete your device from the Google Home app
If you are having trouble setting up your device
If your device stop responding
If you get the error message “Something went wrong”
Factory reset Juno Connect devices
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Juno Connect Wafer

Juno Connect® Wafer User Guide for Google Home

Set up and control Juno Connect® enabled devices
Juno Connect devices can be controlled using the Google Home app or voice commands. Supported features include switching your lights on and off and controlling the brightness settings. You can also control the color temperature on supported devices. Juno Connect devices can be paired with Google Assistants and smart displays. You can connect up to 5 Juno Connect devices with a Google Home assistant or up to 4 with a Nest voice assistant. If you need to set up more devices, use a hub like the SmartThings hub to increase the number.

Set up and Control your Juno Connect devices
Set up a Name for your device
Delete your device from the Google Home app
If you are having trouble setting up your device
If your device stop responding
If you get the error message “Something went wrong”
Factory reset Juno Connect devices

Set up your devices

Set up your voice assistant if you have not already.
Turn your wafer off and wait three seconds before turning it on again.
Open the Google Home app.
From the main window select the “+” at the top left corner to add a new device.
Select “Set up device”.
Select “New devices”.
Select the home associated with the device. Click on “Next”.
Click on “Light Bulb” to set up the device.
Select a room where you are installing the wafer and click “Next”.
Give the wafer a unique name and press next.
Google Home will now complete the device setup.
Once the final setup is complete Google Home will display “Light is ready”.
Your wafer will now appear in your front page. Click on it to control it.

How to control the device

To do:	Say “Hey Google” or “Ok Google”, and:
To turn on a device (named “wafer”)	“Turn on wafer”
To turn off a device (named “wafer”)	“Turn off wafer”
Dim the device to 50% (named “wafer”)	“Dim wafer to 50”
To set the device to the warmest color	“Set wafer to candlelight”
To set the device to the coolest color	“Set wafer to Cool White”
To set device to daylight color	“Set wafer to Ivory”
To lower brightness of a device	“Dim wafer by 15%”
To increase brightness of a device	“Brighten wafer by 10%”

Additional ways to control the device

You can control the lights with the Google Home app. All functions are available from the interface.
You can control a group of lights by calling out the room they are in. Example “turn on kitchen lights” All of the lights placed in the room named Kitchen will work together.

Set up a Name for your device

To change the name of a device, open the Google Home app.
Click on the device icon.
Click on the gear button on the top right.
Click under “Name” to edit.
Rename the device.

Note: All devices must have a unique name. Do not use the room name in the device name. Doing so will make the voice commands unclear. Example: Instead of “kitchen light” use “downlight”. Since the lights are already in the room named kitchen you can just use the voice command “kitchen lights” to control all lights in the kitchen.

Delete your device from the Google Home app

Open the Google Home app.
Click on the icon for the device.
Click on the gear button on the top right.
Click on “Remove Device”
Go back to the front screen and click on the icon for your speaker.
Click on the gear button on the top right.
Click on “Paired Bluetooth devices”.
If your deleted device is displayed, click on the “X” to remove it.
Factory Reset the Device to clear it out.

If you are having trouble setting up your device

If Google home does not find your device try to turn it off for 3 seconds, then turn it back on.
If you are still having trouble. Cancel setup and Force close the Google Home app and repeat step 1.
If you are still having trouble, Factory Reset your device and repeat steps 2.

Note: Make sure you have the latest version of the Google Home app.

Tip:

| If you delete your device from the app, wait 10 minutes before trying to add it back to the app. Also name the device with a different name.
---|---

If your device stop responding

Make sure your wall switch is on. You may turn the device on and off from the wall switch (manual mode).
Turn the device off and then back on. Wait about a minute for the device to regain connectivity with the Google Nest or Home device.
If the above steps do not work, you may have to delete your device from the Google Home app, factory reset the Juno Connect device and wait 10 minutes before adding it again.

Tip: When turning the device on and off from the wall switch, wait at least three seconds between each toggle. The light should turn on and off. If the light does not respond check your wiring, circuit breakers etc.

If you get the error message “Something went wrong”

The signals between your Juno Connect device and your speaker may not be strong enough. Try moving the devices closer to each other. The Google Nest or Home device must be in the same room as your Juno Connect devices to ensure signal strength.
You may have interference from other wireless devices. Move things like routers, cordless phones, wireless speakers, etc. further away from your Google Nest or Home device and your Juno Connect devices.
You may have reached the limit of how many Juno Connect devices can be connected to your speaker. Google Home supports up to five. Google Nest supports up to four. To add more Juno Connect devices consider getting a hub such as the SmartThings hub to increase the number of devices you may link to a Google Home or Google Nest device.

Factory reset Juno Connect devices

Delete your device from the Google Home App.
From the wall switch turn your Juno Connect Device off and on five times.
The device will flash three times indicating successful factory reset.
Repeat step 2 if you don’t see the device flash thee times. Do it slowly.

Tip: When turning the device on and off from the wall switch, wait at least three seconds between each toggle. The light should turn on and off. If the light does not respond check your wiring, circuit breakers etc.