somogyi DP 22 Wired Door Phone Set Instruction Manual
- June 12, 2024
- SOMOGYI
Table of Contents
somogyi DP 22 Wired Door Phone Set
Product Information
- Product Name: DP 22
- Model Number: 2K2-1
- Languages: English (EN), Slovak (SK), Romanian (RO), Serbian-Montenegrin (SRB-MNE), Czech (CZ), Croatian-Bosnian (HR-BIH)
- Components: loudspeaker, microphone, name plate, call button, volume, handset, gate opener
- Product Safety: Important safety instructions included in the user manual
Product Usage Instructions
- Before using the product, read the instructions manual carefully and keep it for future reference.
- This product can be used by children aged 8 years or above and persons with reduced physical, sensory, or mental abilities.
- The product includes a wired doorphone set with components such as a loudspeaker, microphone, name plate, call button, volume control, handset, and gate opener.
- The product can be used to communicate between the outdoor and indoor units within a range of maximum 30m.
- For longer distances between the units (30-50m), use a minimum 2 x 1.00 mm2 cable.
- The product can also be used to connect the outdoor unit with an electric lock within a range of maximum 10m.
- For this connection, use a minimum 2 x 1.00 mm2 cable.
- To unlock the door, an electronic lock needs to be purchased separately and installed according to the specific needs and design of the door or gate.
- The lock can be opened from the indoor unit.
- If no external gate opening circuit is used, make sure the power demand of the electric lock does not exceed 12V / 200mA.
Safety and maintenance
- loudspeaker
- microphone
- name plate
- call button
- volume
- handset
- gate opener
Functions
WIRED DOORPHONE SET
IMPORTANT SAFETY INSTRUCTIONS READ CAREFULLY AND SAVE FOR FUTURE USE!
WARNINGS
- Before use of the product, please read this instructions manual and keep it for future reference. The original document was prepared in Hungarian language.
- This appliance can be used by children aged 8 years or above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, provided that they are supervised or have been given instructions concerning the use of the appliance and understand the hazards involved. Children may not play with the appliance. Children may perform the cleaning or user maintenance of the appliance subject to supervision.
- After removal of the packaging, inspect the product for possible damage during shipment. Keep the packaging away from children if it contains plastic bags or other potentially hazardous items.
- The device has IP23 protection – when properly installed (protected against water spray, up to 60 degrees from vertical).
- Protects the indoor unit from dust, humidity, liquids, moisture, frost and shocks, as well as from direct heat and sunlight.
- Keep the cables connecting the units away from other network cables! Using fine wires can lead to a deterioration in sound quality.
- Do not place sources of open flame, such as candles on the device.
- Protect the device from splashing water and avoid placing objects filled with liquids, such as drinking glasses on the device.
- With consideration to the presence of supply voltage, observe the general rules of contact protection.
- Do not touch the device or the connecting cable with wet hands.
- Make sure that no foreign objects are inserted through the openings!
- If you are not going to use it for a long period of time, unplug it from the electrical outlet.
- Do not dismantle, modify the device, as it may cause fire, accidents or electric shock.
- If the power cable is damaged or has any other defects, disconnect the power immediately and contact a qualified specialist.
- Incorrect installation or unprofessional use will void the product warranty.
- This product is for household use, it is not intended for industrial-commercial applications.
- After the useful life of the product, it is to be considered as hazardous waste. Dispose of the product according to local legislation.
- Due to continuous improvements, technical data, operation and design are subject to change without notice. The most recent instructions manual is available for download from the www.somogyi.hu website.
- However we regret such inconvenience, we do not take any responsibility for possible printing errors.
Caution: Risk of electric shock! Do not attempt to disassemble of modify the unit or its accessories. In case any part is damaged, immediately power off the unit and seek the assistance of a specialist. In the event that the power cable should become damaged, it should only be replaced by the manufacturer, its service facility or similarly qualified personnel.
CLEANING
Before cleaning disconnect the unit by unplugging it from the mains socket. Use a soft, dry cleaning cloth. Avoid the use of any aggressive detergents and liquids.
MAINTENANCE
Regularly check the integrity of connection cables and housings. In case of a malfunction, immediately disconnect the appliance and contact a specialist.
TROUBLESHOOTING
If there is no sound, check the following:
- whether the connection is in accordance with the specifications
- whether there is mains power
- whether any of the wires are damaged
If the conversation is faint, check the following:
- whether you have used wires with a sufficiently large cross-section
- that you have not exceeded the recommended distances
FEATURES
- outdoor unit for mounting on wall exterior
- two-wire connection ideal for replacing old doorbells
- aesthetic and sturdy aluminium construction
- suitable for use with or without a rain cover
- name plate with LED illumination
- indoor unit for furniture or wall mounting
- adjustable sound signal volume
- lock opening option (lock not included)
- operating distance 50 m / in the case of 1 mm2 cable (not included)
- gate-opening functionality without external power supply (12 V / 200 mA)
- water resistance: IP23
- power supply: mains connection cable (230 V~ / 50 Hz)
APPLICATION
The device is ideal for the substitution of traditional two-wire intercom
systems or doorbells, or for easy installation as a new system. The sound
quality and reliable operation depend on the distance between the units and
the cross-section of the cables used. The cables have to be installed so that
they cannot be damaged by weather or physical impacts. Cables must be
purchased separately depending on the specific circumstances and needs. Before
plugging in the mains plug, check that it is connected correctly. Please
follow the recommendations below. Seek the assistance of a professional for
the installation of the intercom system.
COMMISSIONING
Outdoor unit
Mounting is quick and easy as it does not require recessing into the wall. It can be used with or without a rain cover as required. Where possible, mount in a location protected from water and direct sunlight. When deciding the mounting height, take into account the convenience for visitors. Refer to the illustrations at the beginning of this manual before installation.
- remove the plastic sheet under the metal cover, together with its two screws
- remove the rain cover
- remove the top plastic sheet together with its two screws
- slide the metal backplate upwards by a few centimetres to expose the opening for cable insertion
- pass the cables through the rain cover back panel
- when mounted in a covered area, the rain cover is not necessary, as the aluminum back plate can be screwed directly to the wall
- connect the cables inserted through the hole in the metal back cover with the screws
- make sure that the insulation of the wiring cannot be compromised by the metal back cover
- the wiring diagram illustrates the connection from the back cover
- two or four wires need to be connected depending on whether you want to use an electric lock
- screw the top plastic sheet back into place
- reinsert the device into the rain cover frame mounted on the wall, then screw back the bottom plastic sheet
- the two screws can be covered with caps
- using a small flat-head screwdriver, gently pry out the narrow side of the name plate and position the desired text
Indoor unit
It can be mounted on the wall using a wall bracket. Space is also provided on the bracket and on the back of the unit for safe and aesthetic cable routing. By using the slide switch on the side of the device you can adjust the ring volume.
- mount the support frame on the wall in the correct position
- connect the two wires to the disconnected device according to the wiring diagram
- place the cables in the required positions
- slide the device into the frame
- connect it to the network
DOOR UNLOCKING FUNCTION
The electronic lock is not included in the packaging. It must be purchased and
installed according to the specific needs and design of the door/gate. The
lock can be opened from the indoor unit. If no external gate opening circuit
is used, the power demand of the electric lock should not exceed 12 V / 200
mA!
DISPOSAL
Waste equipment must be collected and disposed separately from household waste because it may contain components hazardous to the environment or health. Used or waste equipment may be dropped off free of charge at the point of sale, or at any distributor which sells equipment of identical nature and function. Dispose of product at a facility specializing in the collection of electronic waste. By doing so, you will protect the environment as well as the health of others and yourself. If you have any questions, contact the local waste management organization. We shall undertake the tasks pertinent to the manufacturer as prescribed in the relevant regulations and shall bear any associated costs arising.
Distributor:
SOMOGYI ELEKTRONIC SLOVENSKO s. r. o.
Ul. gen. Klapku 77,
945 01 Komárno, SK
Tel.: +421/0/35 7902400
www.somogyi.sk