signify BL5016 INC Accent Spot Light Owner’s Manual
- June 12, 2024
- signify
Table of Contents
**signify BL5016 INC Accent Spot Light Owner’s Manual
**
Dimension
Ordering guide
Example: BL5016 A S7 BAB
Product Code
BL5016| Finish| Mounting
S7| Lamp
BAB
---|---|---|---
BL5016 Aluminum Bullyte| A Black
H Bronze| S7 Mounting Stake| BAB 20W MR16
Specifications
Housing
Die-cast marine grade aluminum alloy. Fully-adjustable swivel arm with vibration-proof locking teeth. Fully rotatable shroud, double gasketed, die- cast marine grade alloy aluminum. ½” NPS male threads to screw onto accessory mounting stake or junction box, sold separately. Gasketing is silicone. Fasteners are 300 series stainless steel.
Finish
Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting.
Lamping
50W maximum MR16 bi-pin lamp. Lower wattage lamps are acceptable.
Covered MR16 are recommended to protect lamps inner capsule.
Optical Assembly
Clear tempered glass affixed at 10° angle for natural cleaning.
Electrical Assembly
Bi-pin socket type (GU5.3) with 250° C high temperature teflon coated wire leads. Stainless steel retention clip affixed to socket to securely hold lamp in place. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
Warranty
Three-year limited warranty.
Certifications
ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards
Width
2 13/16″ (71mm)
Length
5 13/16″ (147mm)
Max. Weight
1.48 lb.
© 2023 Signify Holding. All rights reserved. The information provided herein is subject to change, without notice. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify.
BL5016 Aluminum Bullyte Spec Sheet 02/23 page 1 of 1
Signify North America Corporation
400 Crossing Blvd, Suite 600
Bridgewater, NJ 08807
Telephone: 855-486-2216
Signify Canada Ltd.
281 Hillmount Road,
Markham, ON, Canada L6C 2S3
Telephone: 800-668-9008
All trademarks are owned by Signify Holding or their respective owners.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>