Paxton APN-1092 Integrating Web Cam User Guide
- June 12, 2024
- Paxton
Table of Contents
Net2 APN-1092
Integrating a web cam for use with Net2 user records
Installing the web cam
There is no configuration necessary as the Net2 software will respond to the camera’s own drivers and software. Once you have installed a web cam on your PC, shut down and restart the Net2 server (v4.11 or later) and you will see additional buttons on the user screens. The web cam can then be used for capturing photos for user records.
New user records
With a web cam installed, the following screen will display when you show a new token to a desktop reader or directly click on Add User.
Click on the Capture Picture button to bring up the webcam image.
(The Get Picture function is used to select a photo already stored on the PC)
Here we see the live image displayed by the web cam. Once you have the view
that you require, click on Capture. If you are happy with the image click ‘OK’
The picture will load into the Add User screen and will be saved with the
users other information. Create the user record by clicking on the Add User
button.
This screen shows the user record with the captured image displayed.
You will see that a Capture Picture button is also available on the user
record so that the webcam can be used to update current records.
© Paxton Ltd 1.0.1
Documents / Resources
|
Paxton APN-1092 Integrating Web
Cam
[pdf] User Guide
None mentioned, APN-1092, APN-1092 Integrating Web Cam, Integrating Web Cam,
Web Cam, Cam
---|---