Siemens EQ.6 TE655203RW Coffee Maker User Manual

Siemens EQ.6 TE655203RW Coffee Maker

Register your product on My Siemens and discover exclusive services and offers. siemens-home.bsh-group.com/welcome

The future moving in.

For technical details, please visit “Specifications and Datasheet”

Dear Coffee Connoisseur,

• Congratulations on purchasing this fully automatic coffee machine from Siemens.
• This instruction manual describes a number of versions of the appliance with minor differences.
• Please also take note of the enclosed Quick reference guide, which you can then keep in the specially provided compartment 16 until you need it again.
• These instructions also show display texts and symbols in a special way so that you can clearly see where we refer to texts displayed by the appliance or symbols that are marked on it.
• Example of display texts: Espresso Example of control elements: C

Intended use

• This appliance is intended for domestic use only.
• Only use the appliance indoors at room temperature and up to 2000 m above sea level.
• Important safety Important safety information
• Please read and follow the operating instructions carefully and keep them for later reference! Enclose these instructions when you give this appliance to someone else.

This appliance can be used by children aged from 8 years and above and by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervi-sion or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. Keep children under 8 years of age away from the appliance and connecting cable and do not allow them to use the appliance. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children unless they are older than 8 years and supervised.

Warning
Risk of electric shock!

• The appliance may only be connected to a power supply with alternating current via a correctly installed socket with earthing. Ensure that the protective conductor system of the domestic supply has been correctly installed.
• Connect and operate the appliance only in accordance with the specifications on the rating plate.
• Do not use the appliance if the power cord and/or appliance are damaged.
• Only our customer service may repair the appliance, e. g. by replacing a damaged power cord, in order to avoid hazards.
• Never immerse the appliance or main cord in water.
• If there is a fault, pull out the mains plug immediately or switch off the power supply.
• Avoid spillage on the connector.
• Please note the special information on cleaning in the instructions.

Warning: Hazard due to magnetism!

• The appliance contains perma-nent magnets which can affect electronic implants such as pacemakers or insulin pumps. Persons wearing electronic implants must maintain a minimum distance of 10 cm from the appliance and from the following parts upon removal: milk container, milk system, water tank, drip tray and brewing unit.

Warning! Risk of suffocation!

• Do not allow children to play with packaging material.
• Store small parts safely as they can be easily swallowed.

Warning Risk of injury!

• Do not reach into the grinding unit!
• Improper use of this appliance may result in injury.

Warning Risk of fire!

• The appliance gets hot.
• Never operate the appliance in a cupboard.

Warning Risk of burns!

• The milk system becomes extremely hot. After use, always let it cool down before you touch it.
• After use the surfaces of the heating element or hotplate can remain hot for some time.
• Freshly prepared beverages are very hot. Leave to cool a little if necessary.

Box Contents

Included in delivery  (Figure A)

• a Fully automatic coffee machine
• b User Manual
• c Quick reference guide
• d Milk tube and suction pipe
• e Water hardness testing strip

Overview

(Figures B, C, D, E, F and G)

• 1 Mains switch J

• 2 Control panel (see next page)

• 3 Display

• 4 Drinks outlet (coffee, milk, hot water), height-adjustable

  • a) Cover
  • b) Milk system /coffee outlet (two-part)
  • c) Milk tube
  • d) Suction pipe
  • e) Milk system holder

• 5 Removable water tank

• 6 Lid for water tank

• 7 Storage compartment for measuring spoon

• 8 Measuring spoon (insertion aid for water filter)

• 9 Bean container

• 10 Aroma cover
  11 Dial selector for grinding level

• 12 Drawers (for ground coffee/cleaning tablet)

• 13 Door to the brewing unit

• 14 Brewing unit

  • a) Locking mechanism
  • b) Cover

• 15 Eject lever

• 16 Storage compartment for quick reference guide

• 17 Drip tray

  • a) Drip tray panel
  • b) Drip tray (two-section)
  • c) Coffee grounds container
  • d) Floater

• 18 Compartment for power cord
• 19 Rating plate (E number, FD)

These user instructions describe several appliance versions. Items marked are not present in all models.

Overview of control elements

(Figure B)

The following symbols are visible or backlit depending on the appliance’s current operating mode:

Mains switch J

• The mains switch J is used to switch the appliance on or off. The appliance rinses itself automatically when it is switched on and off.
• The appliance does not rinse if:
  • it is still warm when switched on, or
  • no coffee was dispensed before it was switched off.
• The appliance is ready for use when the symbols and the display on the control panel are lit.

Control panel (touch-field)

• In the control panel you can easily navigate the controls just by touching the symbols and characters.
• You will hear an audible signal.
• These audible signals can be switched on or off (see the section “Menu – Key tones”).

Drink selection

• Touching the corresponding symbol selects the desired drink (see the section “Preparing drinks”).

Start/stop button

• Touching C either begins preparing a drink or launches a service programme. If you touch Start/Stop again while the drink is being prepared, dispensing will be prematurely halted.

Menu

• Touching A calls up the menu, and the navigation symbols will be activated and light up. Touch , ok and navigate through the menu and call up information or change settings (see the section “Menu”).

Drink options

• Touching H or D adjusts the strength or size of the drink, touching G prepares two cups simultaneously as soon as you touch Start/Stop to begin dispensing (see the section “Preparing drinks”).

“Favourite” and Childproof lock

• Briefly touching R calls up personalized beverages (see the section “Own settings Favourite”).
• Touching R for 3 seconds or more activates or deactivates the childproof lock (see the section “Childproof lock”).

Display

The display shows the selected drinks and settings plus messages reporting the appliance’s operating status.

These messages are cleared as soon as the action has been carried out.

Initial use

General

Fill the appropriate container using only pure, cold, uncarbonated water and solely roasted beans. Do not use coffee beans that have been glazed, caramelised or treated with other additives containing sugar, since they will block the brewing unit. The water hardness setting on the
appliance can be adjusted. The factory setting for the water hardness is 4. Use the enclosed test strip to determine the hardness of your water supply. If this shows a value other than 4, you will need to programme the appliance appropriately after it has been taken into service (see section “Menu – Water hardness”).

Setting up the appliance

• Remove any protective plastic film.
• Place the fully automatic coffee machine on a level, waterproof surface that is able to support its weight.
• The appliance’s ventilation slits must not be covered or obscured.
  • Important: Only use the appliance in a frost-free room. If it has been transported or stored at temperatures below 0°C, wait at least 3 hours before taking it into operation.
• Connect the power supply (cable storage compartment 18) to the socket. You can adjust the length of the cable by pulling it further out or pushing it back in. To do this, place the appliance with its back flush with the edge of the work surface and either pull the cable out downwards or push it in upwards.
• Flip up the lid of the water tank 6.
• Remove the water tank 5, rinse it out and fill it with fresh cold water. Do not fill it past the “max” mark.
• Replace the water tank 5, making sure that it is straight, and push it right down into place.
• Reclose the lid of the water tank 6.
• Fill the bean container 9 with coffee beans.
• Use the main switch J 1 to switch on the appliance.

The control panel and the display will be activated. The display will show the previously specified language, which will also be used for all subsequent display texts. Several different languages are available.

• Touch repeatedly until the display indicates the desired language.

• Touch Start/Stop to confirm your selection.

• The chosen language is now stored.

• The brand logo will light up on the display 3. The appliance will heat up and rinse itself, a small amount of water will run out of the drink outlet 4.

• The appliance is ready for use when the symbols and the display on the control panel are lit.

The factory settings of the fully automatic coffee machine are programmed for optimal performance. The appliances switch off automatically after a configured time (see the section “Menu – Automatic shut-down”).

• When the appliance is used for the first time, after a service program has been run and when it has not been operated for a long period, the first beverage will not have the full aroma and should not be consumed.
• When the fully automatic coffee machine is first used, you will achieve a suitably thick and stable “crema” only after the first few cups have been dispensed.
• If the appliance is in use for a long period, water droplets will form on the ventilation slits. This is normal.

Own settings “Favourite”

• The number of Favourites depends on the model of the appliance. The menu item “Favourite” can be used to store and change individual (personalised) beverages (see the section “Menu – Favourite”).

Call up individual beverage

• Briefly touch .
• Select one of the Favourites already stored with your settings.
• Touch Start/Stop to begin dispensing the beverage.

Childproof lock

The appliance can be locked to protect children against scalding and burns.

• Touch for at least 3 seconds.
  • A key symbol appears on the display 3. The childproof lock is now active.
  • It is no longer possible to operate the appliance.
• Touch for at least 3 seconds.
  The key symbol disappears from the display 3. The childproof lock is now deactivated. The appliance can be used in the usual way.

Preparing drinks

• This fully automatic coffee machine grinds fresh beans for every brewing. For optimum quality, store the beans in a cool place in sealed containers.
  • Important: Fill the water tank 5 with fresh clean water every day. Tank 5 should always contain sufficient water for operating the appliance.
• Cups should be prewarmed, e.g. with hot water. This applies particularly to small thick-walled espresso cups.
• For several settings, coffee is prepared in two stages (see “ aromaDouble Shot”). Please wait until the process is finished.
• Different beverages can be prepared just by touching a key.

Drink selection

• Touching the appropriate symbol selects the desired drink. Your selection is indicated by lines above and below the symbol. The name of the drink and the currently active values for strength and cup size are shown in display 3.

• You can choose from the following drinks:

  • Espresso Espresso Macch. Coffee Cappuccino
  • Latte Macchiato Caffe Latte Milk froth

• Touch the “special beverages” button several times to select different drinks one after the other:

  • Hot water
    Warm milk Coffee pot Kleiner Brauner *

  • Americano *

  • Flat White *

  • Cafe Cortado *

• Items marked * are not present in all models.

Adjusting the strength, selecting ground coffee

• Touch to set the strength of your coffee individually or to specify that ground coffee is to be used.
• The following settings are possible:
  • very mild
  • very strong
  • mild doubleshot strong
  • regular double shot strong+
  • strong Ground coffee
• Touching the appropriate symbol selects the desired drink.
• Touch repeatedly until the desired setting e.g. strong or Ground coffee (see the section “Preparation using ground coffee”) appears on the display.

aromaDouble Shot

The longer the coffee is brewed, the more bitter substances and undesired aromas are released. This has a negative effect on the taste and makes the coffee less easily digestible. So for extra strong coffee, the appliance has a special aromaDouble Shot function. When half the quantity has been prepared, it grinds and brews fresh coffee beans so that only the pleasant, aromatic scents are released.

• The aromaDouble Shot function can be selected for any drink containing a proportion of at least 35 ml coffee volume. It is not available for small drinks such as a small espresso or when the setting is enabled.

Select cup size

• Touching D individually selects the beverage volume desired.
• The following settings are possible:
  • small
  • medium
  • large
• Touching the appropriate symbol selects the desired drink.
• Touch D repeatedly until the display indicates the desired setting.
• An arrow or multiple arrows next to the setting, e.g. „large ˆ”, indicate that the preset capacity (see the section “Menu – Set cup size”) has been changed.

Two cups at once

• Once you have selected a black coffee or milky coffee drink (for some appliances, this applies only to black coffee), touching G prepares two cups simultaneously as soon as you touch Start/Stop to begin dispensing. The setting is shown on the display.

• Touching the appropriate symbol selects the desired drink.

• Touch G .

• Place two prewarmed cups at left and right underneath the beverage outlet 4.

• Touch Start/Stop to begin dispensing the beverage.

• The selected drink will be brewed and will then be dispensed into the two cups.

• The drink is prepared in two stages (two grinding operations). Please wait until the process is completely finished.

• Depending on the type of appliance the function “Two cups at once” may be available only for black coffee, not for milky coffee drinks.

• Preparing coffee drinks

• The appliance must be ready for use.

• Place a prewarmed cup underneath the beverage outlet 4.

• Touch the appropriate symbol to select the desired drink, Espresso or Coffee.

• The name of the drink and the currently active values for strength and cup size are shown in display.

• You can change the cup size and coffee strength by touching D and H. If you select Ground coffee, follow the procedure described under “Preparation using ground coffee”.

For example:

• Touch D repeatedly until the display shows large.
• Touch repeatedly until the display shows mild.
• Touch Start/Stop to begin dispensing the beverage.
• The coffee is brewed and then dispensed into the cup.
• You can touch Start/Stop again to prematurely halt dispensing.

Preparation using milk

• This fully automatic coffee machine possesses an integrated milk system that enables you to prepare coffee with milk or milk froth or warm milk alone.
  • Tip: It is also possible to use plant-based alternatives to milk, e.g. soya milk.
  • Note: The quality of the milk froth depends on the type of milk or the plant-based alternative used.

Risk of burns!

• The upper and lower sections of the milk system 4b become extremely hot. After use, always let them cool down before you touch them.

Caution!

• Dried milk residues are difficult to remove, therefore always clean  (see the section “Cleaning the milk system”).
• While milk is being prepared you may hear a whistling sound. This is due to the technical nature of the milk system 4b.
• TouchStart/Stop again to prematurely halt dispensing.
• The appliance must be ready for use. The milk tube and suction pipe must be connected.
  • Insert the suction pipe 4d into the milk container.
  • Place a prewarmed cup or glass under-neath the beverage outlet.

Coffee-based drinks with milk

• Touch the appropriate symbol to select Espresso Macch., Caffe Latte, Latte Macchiato or Cappuccino.
• The name of the drink and the previously specified values for strength and cup size are shown in display.
• You can change the cup size and coffee strength by touching D and H. If you select Ground coffee, follow the procedure described under “Preparation using ground coffee”.
• Touch Start/Stop to begin dispensing the beverage.
• The milk or milk froth is dispensed into the cup or glass first. Then the coffee is brewed and runs into the cup or glass.
• You can touch Start/Stop again to prema-turely halt dispensing of the milk or coffee, touching C twice stops the entire dispensing process.

Milk froth

• Touch the symbol to select Milk froth.
• Touch D to select the cup size.
• Touch Start/Stop to begin dispensing the beverage.
• Milk froth is dispensed from the beverage outlet.

Special beverages

• Touch the “special beverages” button several times to select different drinks one after the other.
• Items marked * are not present in all models.

Hot water

Before hot water is dispensed, the milk system should be cleaned and the milk tube removed (see the section “Cleaning the milk system”). If the milk system is not cleaned, small amounts of milk may be dispensed together with the hot water.

Risk of burns!

• The milk system 4b becomes extremely hot. After use, always let it cool down before you touch it.
• The appliance must be ready for use.
• Place a cup or glass underneath the beverage outlet 4.
• Touch the “special beverages” symbol repeatedly until Hot water appears on the display.
• Touch D to select the cup size.
• Touch Start/Stop to begin dispensing the beverage.
• If you see the message Please remove suction hose, proceed as follows:
• Take off the milk tube 4c and then touch Start/Stop again.
• Hot water will flow out of the outlet 4.
• You can touch Start/Stop again to prematurely halt dispensing.

**Warm milk ***

• Please read through first and take note of the section “Preparation using milk”. Then:
• Touch the “special beverages” symbol repeatedly until Warm milk appears on the display.
• Touch D to select the cup size.
• Touch Start/Stop to begin dispensing the beverage.
• Warm milk will flow out of the outlet 4.
• You can touch Start/Stop again to prematurely halt dispensing.

**Americano ***

• Place a prewarmed cup underneath the beverage outlet 4.
• Touch the “special beverages” symbol repeatedly until Americano appears on the display.
• Select settings such as the cup size and strength as described in the section “Preparing coffee drinks”.
• Touch Start/Stop to begin dispensing the beverage.
• The coffee is brewed and then dispensed into the cup.
• You can touch Start/Stop again to prematurely halt dispensing.
• Flat White , Cafe Cortado or Kleiner Brauner *
• Please read through first and take note of the section “Preparation using milk”. Then:
• Place a cup or glass underneath the beverage outlet 4.
• Touch the “special beverages” symbol repeatedly until Flat White, Cafe Cortado or Kleiner Brauner appears on the display.
• Select settings such as the cup size and strength as described in the section “Preparing coffee drinks”.
• Touch Start/Stop to begin dispensing the beverage.
• The coffee is brewed and runs into the cup or glass. Milk or milk froth is dispensed depending on the beverage. The sequence of coffee/milk depends on the beverage.
• You can touch Start/Stop again to prematurely halt dispensing of milk or coffee. Touching C twice stops the entire dispensing process.

**Pot function ***

• Place a pot underneath the beverage outlet 4.
• Touch the “special beverages” symbol repeatedly until Pot function appears on the display.
• Touch to select the desired coffee strength.
• Touch D to select the desired quantity (4 or 6 cups).
• Touch Start/Stop to begin dispensing the beverage.

The coffee is brewed and then dispensed into the pot.

• You can touch Start/Stop again to prematurely halt dispensing.

Preparation using ground coffee

This fully automatic coffee machine can also be operated using ground coffee (but not instant coffee).

• When using ground coffee, the setting for the strength of the coffee, dispensing two cups at once and aromaDouble Shot is not available.
• The appliance must be ready for use.
  • Place a prewarmed cup underneath the beverage outlet 4.
  • Touch the appropriate symbol to select a black or milky coffee drink.
  • Touch repeatedly until the display shows Ground coffee.
  • Open the ground coffee drawer 12.
  • Place no more than two level measuring spoons of ground coffee in the drawer.
• Caution!
  • Do not place coffee beans or instant coffee in this drawer.
  • Close the ground coffee drawer 12.
  • Touch Start/Stop to begin dispensing the beverage.
  • The coffee is brewed and then dispensed into the cup.
  • Touch Start/Stop again to prematurely halt dispensing.

Adjusting the grind setting

You can use the rotary selector 11 to adjust the grind setting from coarse to fine.

• Caution!
  Adjust the grind setting only while the grinding unit is running, otherwise you may damage the appliance.

• Risk of injury!
  Do not reach into the grinding unit.

  • With the grinding unit running, adjust the selector 11 from fine (a: turn anticlock-wise) to coarse (b: turn clockwise).

• The new setting will not become apparent until after the second cup of coffee.

• For dark roast coffee beans, choose a finer grind, for lighter beans a coarser grind.

Menu

The menu is used for changing individual settings, accessing information and launching processes.

• Touch menu to open the menu.
• In the display you will see the various setting options, the navigation symbols light up. The current setting is marked on the display.

Navigating through the menu:

•  = move down
• OK = confirm / store
• = go back
• menue = open the menu/exit from the menu

Touching I displays each setting or selection option in order. After you reach the lowest menu item the topmost one is shown again.

For example:

Setting the coffee temperature to max. :

• Touch menu. The menu is opened.
• Touch repeatedly until the display shows Coffee temperature.
• Touch OK , the display shows e.g. high.
• Touch repeatedly until the display shows max.
• Touch OK to store the setting. The display shows the confirmation.
• The menu item Coffee temperature appears.
• Touch to exit from the menu.
• You can specify the following settings:

Cleaning and care

• Starting the special service programmes. You can select Rinse the milk system, Descale, Clean or calc’nClean.
• Use to choose the desired programme and touch to confirm your choice.
• Touch Start/Stop to begin running the programme.
  • Important: Be sure to take note of the section on “Service programmes”.
• Info Service programmes (depending on the type of appliance) Display how many beverages can still be prepared before it will be necessary to run one of the service programmes.
• Use I to display Clean after — c or Descale after — c.
• Touch to exit from the display.
• For technical reasons, the counter does not represent a precise number of cups.

**Coffee-milk ratio ***

• The coffee-milk mixing ratio set in the factory can be adjusted in several steps.
• Use to select the beverage (only for coffee drinks with milk) and confirm with B.
• Use to select the desired mixing ratio (setting of milk content in %) and confirm with B.
• The setting is saved.
  • Example: If a value of 30% is selected, 30% milk and 70% coffee will be dispensed.
• Items marked * are not present in all models.

Favourite

• The menu item Favourite can be used to create or change personalised beverages. The number of Favourites depends on the model of the appliance.
• Use to select a new or existing profile and confirm with B
• Touch the desired beverage and confirm with B.
• Your selection for the beverage settings appears on the display depending on the beverage, e.g. ml or Coffee-milk ratio. Make your settings and confirm with B each time.
• The beverage is now saved in the profile.

Set cup size

• Set up the volume dispensed for each drink and each size of cup. The volumes set up in the factory can be adjusted stepwise.
• Use to choose a drink and touch to confirm your choice.
• Use to choose the desired volume and touch to confirm your choice.
• The setting is then saved.

Water hardness

• Set this to the hardness of the local water supply.
• Level 1, 2, 3, 4 or Softening systems can be selected. The preset level of water hardness is level 4.
• Use to choose the desired water hardness and touch to confirm your choice.
• It is important to set the water hard-ness correctly so that the appliance indicates accurately when the descaling programme should be run.
• You can check the water hardness using the enclosed test strip or by asking your local water supplier. If a water softening system is installed in the house, please select the Softening system setting.
• Briefly dip the test strip in the water and check the result after one minute.

Automatic shut-down

• Setting how long the appliance should wait after the last drink was prepared before it automatically switches itself off.
• You can specify values from 15 minutes to 3 hours. The factory setting is 30 minutes.
• Use to choose the desired interval and touch to confirm your choice.

Coffee temperature

• Specifying the temperature for coffee drinks and hot water.
• You can choose normal, high, or max.
• The setting applies to all types of drink preparation.
• Use to choose the desired temperature level and touch to confirm your choice.

Water filter

• Specifying whether a water filter should be activated or whether no filter is used. You can choose Activate new filter or No filter.

• A water filter lessens limescale deposits and reduces impurities in water. The appliance also does not need to be descaled so often.

• Water filters are available from retail outlets or from customer services (see the section “Accessories”).

  • Important: Before you can use a new water filter it will need to be rinsed.

• Immerse the water filter with the opening facing upwards in a container filled with cold water.

• Gently compress the sides of the filter until no more air bubbles rise to the surface and the water filter rests on the base of the container.

• Use the measuring spoon 8 to press the water filter firmly into the water tank 5.

• Fill the water tank with water up to the “max” mark.

• Connect the milk tube 4c to the milk system 4b and the suction pipe 4d.

• Insert the end of the suction pipe 4d into the drip plate 17b.

• Touch the menu and use to select Water filter.

• Touch and use I to select Activate new filter.

• Empty the drip tray and re-insert.

• Touch to confirm.

• Water will now flow through the filter to rinse it.

• Then empty the drip tray and re-insert. The appliance is ready for use again.

• Rinsing the filter simultaneously activates the setting for displaying the message “Please change water filter”. When this message appears, or at the latest after two months, the filter will no longer be effective. It needs to be replaced for reasons of hygiene and to prevent a build-up of limescale (which could damage the appliance).

• If you do not intend to insert a new filter, select the setting No filter and touch to confirm.

• If the appliance has not been used for a prolonged period (for example, while you are on holiday), the existing filter should be rinsed before the appliance is used again. To do this, simply dispense a cup of hot water.

Languages

• Setting up the language to be used for display texts.
• Use to choose the desired language and touch to confirm your choice.

Frost protection

• Service programme to prevent frost damage during transportation and storage. This programme completely empties the appliance.
• The appliance must be ready for use and the water tank 5 must be filled.
• Touch Start/Stop to begin running the programme.
• Remove the water tank; the appliance automatically empties all its pipes and then switches itself off.
• Empty the water tank 5 and the drip tray 17.

Key tones

• Switches on or off the tones that you hear when you touch the control panel.

• Touch to confirm your choice.

• Use to choose Key tones ON or Key tones OFF and touch to confirm your choice.  Beverage statistics
  (depending on the type of appliance) Shows the volume of drinks dispensed since the appliance was taken into service.

• Touch to exit from the display.

Factory settings

• Resets your own settings to the condition when delivered.
• Touch Start/Stop to clear all your own settings.

Care and daily cleaning

• Risk of electric shock!
  Before cleaning the appliance, unplug it from the mains. Never immerse the appliance in water. Do not use a steam cleaner.

  • Wipe the outside of the appliance with a soft, damp cloth.
  • Clean the control panel with a microfibre cloth.
  • Do not use any cleaning agents containing alcohol or spirits.
  • Do not use abrasive cloths or cleaning agents.

• Always immediately remove any lime-scale, or residues of coffee, milk, cleaning or descaling solution. Corrosion can form underneath such deposits.

• New sponge cloths may contain salts that can cause rust films to form on stainless steel, so such cloths should always be thoroughly rinsed before use.

• Pull the drip tray 17 and coffee grounds container 17c towards the front and remove them. Take off panel 17a and drip plate 17b. Empty and clean the drip tray and coffee grounds container.

• Wipe out the inside of the appliance (holder, trays) and the drawer for ground coffee (this cannot be removed).

• Remove the float 17d and clean it with a moist cloth (depending on the type of appliance).

• Do not put the following parts in the dishwasher:

• Panel of drip tray 17a, cover 4a, brewing unit 14, water tank 5 and aroma cover 10.

The following parts may be cleaned in the dishwasher:

• Drip tray 17, drip plate 17b, coffee grounds container 17c, measuring spoon 8 and the upper and lower parts of the milk system 4b.
  • Important: The drip tray 17 and coffee grounds container 17c should be emptied and cleaned every day to prevent deposits.
• If the appliance is cold when switched on, or if it is switched off after dispensing coffee, it rinses automatically. The system is therefore self-cleaning.
  • Important: If the appliance is not used for a lengthy period (e.g. while you are on holiday), clean the entire appliance thoroughly, including the beverage dispenser 4, milk system 4b, drip tray 17 and brewing unit 14.

Cleaning the milk system

• The milk system 4b is automatically cleaned with a short jet of steam directly after preparing a milk drink. Clean the milk system manually once a week or more frequently if required. For particularly thorough cleaning, the milk system 4b can be automatically rinsed with the programme “Cleaning the milk system” (see the section “Service programmes – Cleaning the milk system”).

Cleaning by hand

• Risk of burns!

• The milk system 4b becomes extremely hot. After use, always let them cool down before you touch them.

• Take the milk system 4b apart to clean it:

  • Push the beverage outlet 4 right down. Take off the cover 4a towards the front and pull off the milk tube.

• Remove the milk system 4b by pulling it straight forward.

• Clean the milk system holder 4e thoroughly to remove any coffee residues.

• Take apart the upper and lower parts of the milk system 4b.

• Separate the milk tube from the suction pipe.

• Clean the individual parts with washing-up liquid and a soft cloth.

• Rinse all parts with clean water and dry them.

• The upper and lower parts of the milk system 4b, the milk tube 4c and the suction pipe 4d can also be cleaned in a dishwasher.

• Reassemble the individual parts.

• Place the milk system 4b back in the appliance from the front, making sure it is straight.

• Replace the cover 4a.

• See also the Quick reference guide in the storage compartment 16.

• In addition to the automatic cleaning programme, the brewing unit 14 should be removed regularly for cleaning.

• Use the main switch J 1 to switch the appliance completely off.

• Open the door 13 to the brewing unit.

• Slide the red latch 14a on the brewing unit 14 all the way to the left.

• Press the eject lever 15 right down. The brewing unit will be released.

• Take hold of the brewing unit 14 by the recessed grips and carefully remove it.

  • Important: Clean it without using washing-up liquid and do not put it in the dishwasher.

• Remove the cover 14b and thoroughly clean the brewing unit 14 under running water.

• Thoroughly clean the strainer of the  brewing unit under the water jet.

• Thoroughly clean the inside of the appli-ance with a moist cloth, removing any coffee residues.

• Allow the brewing unit 14 and the inside of the appliance to dry.

• Replace the cover 14b on the brewing unit and then push the brewing unit 14 back into the appliance until it latches into place.

• Press the eject lever 15 right up.

• Slide the red latch 14a all the way to the right and close the door 13.

Service programmes

See also the Quick reference guide in the storage compartment 16.

Following prior notification, either

• Descaling necessary or
• Cleaning necessary or
• calc’nClean is necessary.

appears in display 3 at certain intervals. The unit should immediately be cleaned or descaled using the appropriate programme. The two processes Descale and Clean can optionally be carried out together using the calc’nClean function (see the section “calc’nClean”). Failure to carry out the service programme according to the instructions may damage the appliance.

Using a water filter increases the intervals until a descaling programme needs to be performed.

• Important: if descaling is not performed on the appliance in good time, then the following appears:

  • Descaling overdue. The appliance will soon be locked –> press the menu for 3 sec.
  • Immediately perform the descaling process in accordance with the instructions. If the appliance is locked, it can only be operated again once the descaling process has been carried out.
  • Caution!
    For each of the service programmes, use descaling and cleaning agents as described in the instructions. Never interrupt a service programme. Do not swallow any cleaning fluids! Never use citric acid, vinegar or any vinegar- based agents. Never place descaling tablets or other descaling materials in the coffee drawer 12!

• Before starting the service program (Descale, Clean or calc’nClean) remove the brewing unit, clean it as instructed and replace it. Clean the milk system holder 4e thoroughly to remove any coffee residues.

• Specially developed suitable descaling and cleaning tablets are available from retail outlets or from customer services (see the section “Accessories”).

• Cleaning the milk system

• Takes about 1 minute.

• Touch menu to open the menu.

  • Use to choose Cleaning and care and touch to confirm your choice.
  • Use to choose Rinse the milk system and touch to confirm your choice.
  • Touch Start/Stop to begin running the programme.

• The display 3 will indicate the progress of the programme:

  • Place an empty glass under the beverage outlet 4 and stand the end of the suction pipe 4d in it.
  • Touch Start/Stop. The milk system will now clean itself automatically.
  • Then empty the glass and clean the suction pipe 4d.

• You should also regularly clean the milk system manually (dishwasher or by hand, see the section “Care and daily cleaning”).

Descaling

• Takes about 30 minutes.
• The line at the bottom of the display indicates the progress of the descaling process.
• If there is a water filter in the water tank 5, be sure to remove it before starting the service programme.
  • Touch the menu to open the menu.
  • Use to choose Cleaning care and touch to confirm your choice.
  • Use to choose Descale and touch to confirm your choice.
  • Touch Start/Stop to begin running the programme.
• The display 3 will indicate the progress of the programme:
  • Empty and re-insert the drip tray 17.
  • The following request appears: Remove the water filter if inserted ¢start.
• Remove the filter and then touch Start/Stop again.
• Pour lukewarm water into the empty water tank 5 up to the “0.5 l” mark and then dissolve one Siemens descaling tablet TZ80002N in it.
• Touch Start/Stop.
• Place a container with a capacity of 0.5 litres under the beverage outlet 4.
• Place the end of the suction pipe 4d in the container.
• Touch Start/Stop.
• The descaling programme will now run for about 20 minutes.
• If there is not enough descaling solution in the water tank 5, you will see the prompt Refill descaler ¢start.
• Add more descaling solution and then touch Start/Stop again.
• Rinse the water tank 5 and refill it with fresh water up to the “max” mark.
• If you use a filter, replace it now.
• Touch Start/Stop.
• The descaling programme will now run for about 1 minute and rinse the appliance.
• Empty and re-insert the drip tray 17.
  • Important: Wipe over the appliance with a soft damp cloth to ensure that you immediately remove any traces of descaling solution. It is possible for corrosion to form underneath such deposits. New sponge cloths may contain salts that can cause rust films to form on stainless steel, so such cloths should always be thoroughly rinsed before use. Clean the suction pipe 4d of the drinks outlet particularly carefully.
• The appliance has finished descaling and is ready for use again.

Cleaning

• Takes about 9 minutes.
• The line at the bottom of the display indicates the progress of the descaling process.
• Touch menu to open the menu.
• Use to choose Cleaning and care and touch to confirm your choice.
• Use to choose Clean and touch to confirm your choice.
• Touch Start/Stop to begin running the programme.

The display 3 will indicate the progress of the programme:

• Empty and re-insert the drip tray 17.
• Open the ground coffee drawer 12.
• Drop one Siemens cleaning tablet in the drawer 12 and close it.
• Touch Start/Stop.
• The cleaning programme will now run for about 7 minutes.
• Empty and re-insert the drip tray 17. The appliance has finished cleaning and is ready for use again.

calc‘nClean

• Takes about 43 minutes.
• calc’nClean combines the functions Descale and Clean.
• If both programmes are due to be carried out close together the fully automatic coffee machine will automatically suggest this service programme.
• The line at the bottom of the display indicates the progress of the descaling process.
• If there is a water filter in the water tank 5, be sure to remove it before starting the service programme.
• Touch menu to open the menu.
• Use to choose Cleaning and care and touch to confirm your choice.
• Use to choose calc’nClean and touch to confirm your choice.
• Touch Start/Stop to begin running the programme.
• The display 3 will indicate the progress of the programme:
• Empty and re-insert the drip tray 17.
• Open the ground coffee drawer 12.
• Drop one Siemens cleaning tablet in the drawer 12 and close it.
• Touch Start/Stop.
• The following request appears: Remove water filter if inserted ¢start.
• Remove the filter and then touch Start/Stop again.
• Pour lukewarm water into the empty water tank 5 up to the “0.5 l” mark and then dissolve one Siemens descaling tablet TZ80002N in it.
• Touch Start/Stop.
• Place a container with a capacity of 1 litre under the beverage outlet 4.
• Place the end of the suction pipe 4d in the container.
• Touch Start/Stop.
• The descaling programme will now run for about 28 minutes.
• If there is not enough descaling solu-tion in the water tank 5, you will see the prompt Refill descaler ¢start.
• Add more descaling solution and then touch Start/Stop again.
• Rinse the water tank 5 and refill it with fresh water up to the “max” mark.
• If you use a filter, replace it now.
• Touch Start/Stop

The descaling programme will now run for about one more minute, and then the cleaning programme will run for about 7 minutes and rinse the appliance.

• Empty and re-insert the drip tray 17.
• Important: Wipe over the appliance with a soft damp cloth to ensure that you immediately remove any traces of descaling solution. It is possible for corrosion to form underneath such deposits. New sponge cloths may contain salts that can cause rust films to form on stainless steel, so such cloths should always be thoroughly rinsed before use. Clean the suction pipe 4d of the drinks outlet particu-larly carefully.
• The appliance has finished descaling and is ready for use again.
• Important: If any of the service programmes is ever interrupted, for instance by a power failure, please proceed as follows:
• Rinse the water tank 5 and refill it with fresh water up to the “max” mark.
• Touch Start/Stop.

The appliance will be rinsed for approx. 2 minutes for safety reasons.

• Empty and re-insert the drip tray 17. The aborted service programme must be restarted.

Tips on energy saving

• When the fully automatic coffee machine is not in use, use the mains switch J 1 on the front of the appliance to switch it off.
• In the menu, set the Automatic shut-down period to 15 minutes.
• If possible, do not interrupt the dispensing of coffee or milk froth. Stopping a process prematurely results in higher energy consumption and the drip tray fills up more quickly.
• Descale the appliance regularly to avoid a build-up of limescale. Limescale residues cause higher energy consumption.

Frost protection

Caution! To prevent frost damage during trans-portation and storage, completely empty the appliance beforehand.

• See the section “Menu – Frost protection”.

Storing accessories

The fully automatic coffee machine has special compartments to hold the meas- uring spoon and the Quick reference guide.

• To store the measuring spoon 8, lift off the water tank 5 and place the spoon in the preformed recess 7.
• To store the Quick reference guide, open the door to the brewing unit 13 and insert the guide into the space provided 16.

Accessories

• The following accessories are available from retailers or from customer service:

Accessories| Order number

Retail /

Customer service

---|---
Cleaning tablets| TZ80001A/ 00312097 TZ80001B / 00312098
Descaling tablets| TZ80002A/ 00312094 TZ80002B / 00312095
Water filter| TZ70003 / 00575491
Care set| TZ80004A/ 00312105 TZ80004B / 00312106
Milk container with “freshLock” lid| TZ80009N / 00576166

Disposal

Dispose of packaging in an environ-mentally-friendly manner. This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment – WEEE). The guideline determines the frame-work for the return and recycling
of used appliances as applicable throughout the EU. Please ask your specialist retailer about current disposal facilities.

Customer Service

• Detailed information on the warranty period and terms of warranty in your country is available from our after-sales service, your retailer or on our website.
• The contact details for Customer Service can be found in the enclosed Customer Service directory or on our website.

Simple troubleshooting

The appliance no longer

responds.

| Fault in the appliance| Pull out the mains plug, wait 10 seconds, plug it back in.
The grinder will not start.| The appliance is too hot.| Disconnect the appliance from the mains and leave to cool for one hour.
Coffee or milk froth quality varies widely.| Build-up of limescale in the appliance.| Descale the appliance according to the instructions.
Milk froth quality varies widely| The quality of the milk froth depends on the type of milk or the plant-based alternative used.| Optimise the result through the selection of the type of milk or plant-based drink.
No hot water dispensed.| The milk system or the intake of the milk system is soiled.| Clean the milk system or the intake (see the section “Care and daily cleaning”).
Too little milk froth, none at all, or the milk system is not taking in any milk.| The milk system or the intake of the milk system is soiled.| Clean the milk system or the intake (see the section “Care and daily cleaning”).
Milk not suitable.| Do not use milk that has been boiled. Use cold milk with a fat content of at least 1.5%.
The milk system is assem- bled incorrectly.| Moisten the upper and lower sections and fit them together.
Build-up of limescale in the appliance.| Descale the appliance according to the instructions.
The milk/blended milk drinks are too cold.| The milk used is too cold.| Use lukewarm milk.
The personally selected per-cup quantity is

not reached. Coffee dispensing slows

to a trickle or stops

completely.

| Coffee is ground too finely. Pre-ground coffee is too fine.| Adjust the grinding level to a coarser setting. Use a coarser ground coffee.
Heavy build-up of lime- scale in the appliance.| Descale the appliance according to the instructions.
Coffee has no “crema”.| Unsuitable type of coffee.| Use a type of coffee with a higher proportion of robusta beans.
The beans are no longer fresh.| Use fresh beans.
The grinding setting is not suitable for the beans.| Adjust the grinding unit to a finer setting.
If you are unable to solve the problem, always call the hotline!

Y ou will find the telephone numbers at the back of these instructions�

finer pre-ground coffee.
Unsuitable type of coffee.| Use a darker roast.
Coffee is too “bitter”.| The grinding setting is too fine or the pre-ground coffee is too fine.| Adjust the grinding unit to a coarser setting or use coarser pre-ground coffee.
Unsuitable type of coffee.| Change the type of coffee.
The coffee tastes “burnt”.| The brewing temperature is too high| Reduce the temperature, see the section “Menu – Coffee temperature”.
The grinding setting is too fine or the pre-ground coffee is too fine.| Adjust the grinding unit to a coarser setting or use coarser pre-ground coffee.
Unsuitable type of coffee.| Change the type of coffee.
The appliance is not

dispensing drinks

| Air in the water filter.| Dip the water filter in water until no more air bubbles escape, then replace the filter.
The appliance is not

dispensing drinks

| Residues of limescale remover are blocking the water tank.| Remove the water tank and clean thoroughly.
The water filter does not stay in position in the water tank.| The water filter is not fitted correctly.| Firmly press the water filter straight down into the tank connection.
The coffee grounds are not compact and are too wet.| The grinding setting is too fine or too coarse, or not enough ground coffee has been used.| Adjust the grinding unit to a coarser or finer setting, or use 2 level measuring spoons of ground coffee.
Water dripped onto the inner floor of the appli- ance when the drip tray was removed.| Drip tray removed too early.| Wait a few seconds after the last drink was dispensed before removing the drip tray.
Display shows Please refill bean container although the container is already full, or the grinder is not grinding any beans.| Beans are not falling into the grinding unit (beans too oily).| Gently tap the bean container. Possibly change the type of coffee. When the bean container is empty, wipe it with a dry cloth.
Display

Empty drip tray

despite empty drip tray.

| Emptying is not detected when the appliance is switched off.| When the appliance is switched on, remove and re-insert the drip tray.
The drip tray is soiled.| Clean the drip tray thoroughly.
If you are unable to solve the problem, always call the hotline!

Y ou will find the telephone numbers at the back of these instructions�

Display

Fill with uncarbonated water or change filter

| Water tank inserted wrongly.| Insert water tank correctly.
Carbonated water in the water tank.| Fill the water tank with fresh tap water.
Float is stuck in the water tank.| Remove the tank and clean thoroughly.
New water filter not rinsed according to the instructions.| Rinse the water filter according to the instructions and switch on.
Air in the water filter.| Dip the water filter in water until no more air bubbles escape, then replace the filter.
Water filter is old.| Insert a new water filter.
Very frequent display that descaling is necessary.| Water is too hard.| Insert a water filter and activate (see chapter “Menu – Water

filter”).

Beverage dispenser

blocked.

| Clean the beverage dispenser and the milk system intake (see the section “Care and daily cleaning”).
Display

Please clean brewing unit, then replace it

| Brewing unit is soiled.| Clean the brewing unit.
Too much pre-ground coffee in the brewing unit.| Clean the brewing unit. Place no more than 2 level measuring spoons of ground coffee in the drawer.
The mechanism of the brewing unit is stiff.| Clean the brewing unit (see the section “Care and daily cleaning”).
Display

Restart appliance

| Brewing unit is soiled.| Clean the brewing unit.
Display

Appliance not sufficiently descaled. Repeat the process

| Incorrect or insufficient descaler or excessive scale on appliance.| Perform descaling programme

again

Display

Leave the appliance to cool down

| Appliance is too hot.| Switch off appliance for 30 minutes.
Display

Error

Please contact the hotline

| The appliance has a fault.| Please contact the hotline.
If you are unable to solve the problem, always call the hotline!

Y ou will find the telephone numbers at the back of these instructions�

Technical specifications

19 bar (TE655.., TE657..)

Maximum water tank capacity (without filter)| 1.7 l
Maximum capacity of the coffee bean container| ~300 g
Length of power cable| 100 cm
Dimensions (H x B x D)| 385 x 280 x 468 mm
Weight, empty| 10-12 kg
Type of grinding unit| Ceramic

Frequently Asked Questions

Is Siemens EQ.6 TE655203RW coffee maker safe for children to use?

Siemens EQ.6 TE655203RW coffee maker can be used by children aged 8 years and above if they have proper supervision or instruction. Children under 8 should not use it.

What should I do if the power cord or appliance is damaged?

Do not use the appliance if the power cord and/or appliance are damaged. Contact customer service for repairs to avoid hazards.

Is it safe to immerse the appliance or main cord in water?

No, you should never immerse the appliance or main cord in water. Keep them dry to prevent electric shock.

How can I avoid the risk of magnetism affecting electronic implants such as pacemakers or insulin pumps?

If you have electronic implants, maintain a minimum distance of 10 cm from the appliance and specific parts like the milk container, milk system, water tank, drip tray, and brewing unit.

What precautions should I take to prevent suffocation risks?

Do not allow children to play with packaging material, and store small parts safely as they can be easily swallowed.

Are there any specific safety precautions related to the Siemens EQ.6 TE655203RW coffee grinder?

Yes, do not reach into the grinding unit, as improper use of Siemens EQ.6 TE655203RW appliance may result in injury.

Is there a risk of fire associated with Siemens EQ.6 TE655203RW coffee maker?

The appliance can get hot during operation, so it should never be operated inside a cupboard.

What should I do during the initial setup of the Siemens EQ.6 TE655203RW coffee maker?

During the initial setup, make sure to fill the water tank with pure, cold, uncarbonated water and use only roasted coffee beans. Do not use glazed or caramelized beans with additives containing sugar.

How do I set up the appliance for use?

Remove any protective film, place the coffee maker on a level surface, ensure proper ventilation, and connect it to a power supply with the provided cable.

How do I prepare drinks with Siemens EQ.6 TE655203RW coffee maker?

You can select and customize your drinks using the control panel and touch- field, adjusting strength and size as needed.

How can I activate or deactivate the childproof lock on the Siemens EQ.6 TE655203RW coffee maker?

To activate the childproof lock, touch the button for at least 3 seconds. To deactivate it, touch the button for at least 3 seconds again.

What is the power rating of the Siemens EQ.6 TE655203RW coffee maker?

The coffee maker has a power rating of 1500 W.

What is the voltage and frequency for the power connection of Siemens EQ.6 TE655203RW coffee maker?

The coffee maker operates at a voltage of 220-240 V and a frequency of 50/60 Hz.

Reference:Siemens EQ.6 TE655203RW Coffee Maker User Manual- device.report

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>