somogyi TF 311 Table Fan Instruction Manual

TF 311
Instruction Manual 2B3-1

Safety and maintenance

Figure1

| STRUCTURE (Figure 1.)
---|---
1.| front part of grid
2.| blade fastening nut
3.| fan blade
4.| grid fastening nut
5.| rear part of grid
6.| motor axle
7.| motor
8.| switch of oscillation
9.| stand
10.| speed level switches
11.| base
12.| screws

DESK FAN

IMPORTANT SAFETY INSTRUCTIONS
READ THE INSTRUCTION MANUAL CAREFULLY BEFORE USE AND RETAIN IT FOR LATER REFERENCE!

WARNINGS

1.  Before using the product for the first time, please read the instructions for use below and retain them. The original instructions were written in the Hungarian language.
2. his appliance may only be used by persons with impaired physical, sensory or mental capabilities, or lacking in experience or knowledge, as well as children from the age of 8, if they are under supervision or have been given instruction concerning use of the appliance and they have understood the hazards associated with use. Children should not be allowed to play with the unit. Children may only clean or perform user maintenance on the appliance under supervision.
3. Make sure that the appliance has not been damaged in transit!
4. The appliance must not be used with programmable timers, timer switches or stand – alone remote controlled systems that can automatically turn the unit on because any covering or improper location of the unit can cause an accident.
5. Do notuse in locations where flammable vapors or explosive dust may be present. Do not use near flammable materials or in potentially explosive atmospheres!
6. Operate only under constant supervision!
7. Do not operate unattended in the presence of children!
8. Only for indoor use, in a dry place. Protect from humidity (e.g. bathrooms, swimming pools)!
9. Itis PROHIBITED to use the unit near bathtubs, basins, showers, swimming pools or saunas!
10. It is prohibited to use the appliance in motor vehicles or in confined spaces (<5 m’) such as elevators!
11. When not planning to use the unit for an extended period of time, switch it off then remove the power plug from the outlet!
12. Always remove power from the appliance before relocating it!
13. Only move it by using the carrying handle!
14. If any irregular operation is detected (e.g., unusual noise or burnt odor from unit), immediately switch it off and remove the power plug!
15. Make sure that no foreign objects or liquid can enter the appliance through the openings.
16. rotect from dust, humidity, sunlight and direct heat radiation.
17. Power off the unit by unplugging it from the electric outlet before cleaning!
18. Always power off the fan before removing or fastening back the protective grid, by unplugging it from the electric outlet!
19. Never touch the unit or the power cable with wet hands!
20. The appliance may only be connected to 230 V~ / 50 Hz electric wall outlets!
21. Unwind the power cable completely
22.  Do not lead the power cable over the appliance!
23.  Do not lead the power cable under carpets, doormats, etc.!
24. The appliance should be located so as to allow easy access and remove of the power plug!
25. Lead the power cable so as to prevent it from being pulled out accidentally or tripped over!
26. The actual instruction manual can be downloaded from www.somogyi.hu websile.
27. We don’t take the responsibility for printing errors and apologize if there’s any.
28. The unit is intended for household use. No industrial use is permitted!

Caution:
Risk of electric shock! Do not attempt to disassemble of modify the unit or its accessories. In case any part is damaged, immediately power off the unit and seek the assistanos of a specialist.
**In the event that the power cable should become damaged, it should only be replaced by the manufacturer, ts service facility or similarly qualified personnel.
ASSEMBLY OF THE DEVICE**

1. Fasten the base (11) with 4 pos screws to the stand (9).
2. ee tear part of the grid (5) onto the motor so as to get the carrying handle facing upwards.
3. After that fasten the grid fixing nut (4).
4. Push the blade (3) to the motor axe (6), and then fix it with the nut (2).
5. Hang the front part of the grid onto the rear part (4), fix it with the clasps, and then fasten it with screw at the bottom.

CLEANING
In order to ensure optimum functioning, the unét may require cleaning at least once 8 month, depending on the manner of use and degree of contamination.

1. Prior to cleaning switch off and power off the unit by unplugging it from the electric outlet!
2. Attention! Remove the front part of grid when the fan is not under power!
3. Use a slightly moistened cloth to clean the unit’s exterior. Do not use any aggressive Cleaners. Avoid getting water inside of and on the electric components of the appliance!
4. Attention! Put back and fasten the protective grid to the fan, when it is not under power!
5. Only reinstall the fan afterwards!

TROUBLESHOOTING

DISPOSAL
**** Waste equipment must be collected and disposed separately from household waste gecause it may contain components hazardous to the environment or health. Used or waste equipment may be dropped off free of charge at the point of sale, or at any distributor which sells equipment of identical nature and function. Dispose of product at a facility specializing in the collection of electronic waste. By doing so, you will protect the environment as well as the health of others and yourself. If you have any questions, contact the local waste management organization. We shall undertake the tasks pertinent to the manufacturer as prescribed in the relevant regulations and shall bear any associated costs arising.

DESK FAN
FEATURES
nominal blade diameter: 30 cm

• adjustable output (3 stages)
• fixed standing or oscillation (90°)
• controllable dip angle of head
• dense grid
• white

THE FAN OPERATION
The fan can be switched on and target speed stage can be adjusted with 1, 2 or 3 speed level switches (10). By pushing down the switch of oscillation (8), oscillation can be switched on, by pulling it up, it can be switched off. You can switch off the fan with 0 button.
Dip angle of the head can be adjusted simply, there’s no need to loosen or fasten any screws.

TECHNICAL SPECIFICATION

POWEF SUPPLY:………………………………  230 ~/ 50 Hz / 40 W
PFOLECHION ClASS? ………………………….ll
maximum fan – air MASS VOIUME: …………………F= 31,58 m³/min
fan input power: … ………….P= 36,32W
SOLVICE VAIUC …………………….. = 0,87 (m³/min)/W
power consumption during standby position: ………….Psb = 0,W
notise level: ………………….Lwa=50,5dB(A)
MAXIMUM Ail SPCEM: ……………c= 2,437 M/sec
Service value Standard: ……………………………..IEC 60879:2019 (corr. 1992)
Dlade diameter: ……………………………………. 30 cm
ventilator height: ………………………………….47cm
Ventilator Weight: ……………………………..1,7kg

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>