GEORGE WILLY Web Atelier Letter Board Instructions
- June 4, 2024
- GEORGE WILLY
Table of Contents
GEORGE WILLY Web Atelier Letter Board
ATELIER LETTER BOARD
The Atelier Letter Board is a luxurious menu board that can be used to display
menus, announcements, or messages.
Inspired by urban spaces of the previous century, the Atelier Letter Board
consists of changeable aluminum display lettering with an anodized coating and
is available in classic black or timeless bronze.
With the use of these luxurious atelier letters, changing your interior
signage and messaging is as simple as swapping out the letters into the wall-
mounted rails.
Thank you for your purchase,
George & Willy
CARE GUIDE
- Where you install your product depends on its material/s.
- Wooden and Steel Products: We recommend using these products inside or under a shelter where they are protected from any exposure to rain or water.
- Aluminum Products: These products are non-corrosive and suitable for use outside.
- Chalk Products: You should use traditional dry chalk. We don’t recommend using liquid chalk pens on our products.
- Transportable Outdoor Signage: If there is exposure to wind, we recommend bringing signage inside to protect it from the extremes. We offer Sandbags to help support your product in moderate wind conditions.
HALF SET COMPONENTS
(Double Quantities For Full Sets)
MONUTING
-
Choose a configuration for your Atelier Letter Board. Depending on your space, the rails can be installed below one another, or side-by-side. To correctly install your board, we recommend using a qualified builder
-
Vertical
-
Horizontal
-
Select a wall space to install the Atelier Letter Board. The rails should be fixed into studs or a solid wall. Insert the first screw in the left hole
-
Using a level, position the rail so it is perfectly horizontal. Fasten the second and third screws and ensure the rail is securely fixed to the wall.
-
Place the spacer on the first rail. Using this as a guide, position and fix the second rail onto the wall. Continue this method for the remaining rails. Make sure the rails are nice and tight on the spacer to ensure the rails are parallel.
-
Remove desired letters by bending and snapping the small join.
-
Slide the cut letters along the rail slot to create your display.
DISCLAIMER
George and Willy products have a lifetime warranty. This covers faulty
workmanship and/or materials when the product is used in normal, domestic, or
commercial conditions and following the care and use instructions provided.
It does not cover normal wear and tear, accidents, or misuse of the product.
If the defect was caused by a manufacturing fault, the faulty product will be
replaced free of charge. If the original product is no longer in production,
it will be replaced with the most similar product.
Please keep all parts out of reach of small children as they may pose a
choking risk.
PINTEREST :
www.pinterest.com/georgeandwilly/
GMAIL : [email protected]