GEORGE WILLY Barn Door Hardware Instructions
- June 8, 2024
- GEORGE WILLY
Table of Contents
GEORGE WILLY Barn Door Hardware
BARN DOOR HARDWARE
The Barn Door Hardware is compatible with a range of our board products. It is
a fun and unique way to show your offerings, display a menu or greet your
guests
The Barn Door Hardware is designed with a focus on quality, functionality, and
longevity
All components are finished in a high-quality satin black powder coat, or
black oxide to give it a clean and beautiful aesthetic to add to your space
Thank you for your purchase
George & Willy
COMPONENTS
Start by considering your wall space and how your letter board will be sitting on the Barn Door Hardware.
The boards hanging from the Barn Door Hardware can be quite heavy, for that
reason it is important for when installing to drywall, that you fix at least
two of the screws into a stud behind the wall.
Make sure that the rail is perfectly level before installing. otherwise your
board may roll to one side.
For installing a single rail, you need to be sure that the stand off blocks
sit on top of the rail – this stops the board from rolling off the end. Use
the joiner block only when joining two rails together.
Using the mounting nuts, bolts + washers, fasten the 2x brackets to the back
of your board.
Multiple Letter Boards in our range can be used in conjunction with the Barn
Door Hardware, just check the product listing on our website.
Lift the wheels of the bracket over the rail so that it sits in Your board
should now be mounted and good to go!
Depending on which Letter Board you have installed, you might write messages
or menus using our magnetic letter packs, chalk, or have your local signwriter
creat vinyl decals for something more permanent.the groove nicely.
DISCLAIMER
George & Willy products have a lifetime warranty. This cOvers faulty workmanship and/or materials when the product is used in normal, domestic, or commercial conditions and following the care and use instructions provided.
It does not cover normal wear and tear, accidents, or misuse of the product. We recommend using a qualified builder to complete the installation to reduce the risk of damage or injury. If the defect was caused byya manufacturing fault, the faulty product will be replaced free of charge. If the original product is no longer in production, it will be replaced with the most similar product.
Please keep all parts out of reach of small children as they may pose a choking risk.