GEORGE WILLY Daily Roller Paper Rolls Instructions
- June 4, 2024
- GEORGE WILLY
Table of Contents
GEORGE WILLY Daily Roller Paper Rolls
CARE GUIDE
Where you install your product depends on its material/s. Wooden and Steel Products: We recommend using these products inside or under a shelter where they are protected from any exposure to rain or water. Aluminum Products: These products are non-corrosive and suitable for use outside. Chalk Products: You should use traditional dry chalk. We don’t recommend using liquid chalk pens on our products. Transportable Outdoor Signage: If there is exposure to wind, we recommend bringing signage inside to protect it from the extremes. We offer Sandbags to help support your product in moderate wind conditions.
COMPONENTS
- Select a wall space to install the roller. A smooth surface is preferable, though if it is rough (i.e. brick), we recommend making a backing plate from a smooth material such as plywood.
- It is essential to install the roller on a solid wall. Find a stud and fasten the first screw, ensuring it has a solid hold.
- Place a level on top and position the bracket so that it is perfectly horizontal. Fasten the second screw into a stud. Continue to fasten the remaining screws that go into a stud until the bracket is securely fixed to the wall. Note: Not all of the holes provided need to be used, they are there so that you have the best chance to fasten into a wall stud while positioning it how you want it on your wall.
- Once you’ve ensured the bracket is safely secured to the wal, slide the round bar through the paper core. Lift the bar onto the bracket and slide it down into the bracket guides.
- Pull the kraft paper down the wall until you reach your desired length. We recommend a distance around 300mm/11.
- Fasten the first screw into the flat bar at your desired paper length. Place a level on top and position the flat bar so that it is perfectly horizontal. Fasten the second screw and ensure the bar is securely fixed to the wall.
DISCLAIMER
George & Willy products have a lifetime warranty. This covers faulty workmanship and/or materials when the product is used in normal, domestic, or commercial conditions and following the care and use instructions provided. It does not cover normal wear and tear, accidents, or misuse of the product. If the defect was caused by a manufacturing fault, the faulty product will be replaced free of charge. If the original product is no longer in production, it will be replaced with the most similar product. Please keep all parts out of reach of small children as they may pose a choking risk.
CONTACT US
- @georgeandwilly
- www.pinterest.com/georgeandwilly/
- [email protected]
- www.georgeandwilly.com