GEORGE WILLY Round Sign Instructions
- June 4, 2024
- GEORGE WILLY
Table of Contents
GEORGE WILLY Round Sign
ROUND SIGN
The Round sign is a great first look into your cafe, gallery, or boutique, easily mounted to wood, brick, and concrete. Constructed from aluminum with a high-quality powder coat finish, the Round Sign is resistant to rust and stands up to the elements without weathering.
Your Round Sign is ready for your custom vinyl to be applied by your local signwriter.
Thank you for your purchase,
George & Willy
CARE GUIDE
Where you install your product depends on its materials.
Wooden and Steel Products: We recommend using these products inside or under a shelter where they are protected from any exposure to rain or water.
Aluminum Products: These products are non-corrosive and suitable for use outside.
Chalk Products: You should use traditional dry chalk. We don’t recommend using liquid chalk pens on our products.
Transportable Outdoor Signage: If there is exposure to wind, we recommend bringing signage inside to protect it from the extremes. We offer Sandbags to help support your product in moderate wind conditions.
COMPONENTS
INSTALLATION
-
Your Round Sign comes blank and ready for your display to be applied. We recommend asking a local signwriter to do this for you.
-
Select a space to install your Round Sign, somewhere unobtrusive and highly visible. We recommend fixing the Round Sign into studs or a solid wall. Insert the first screw using either the concrete or wood screws provided depending on your installation surface.
-
Using a level, position the sign so it is perfectly vertical.
Fasten the remaining screws to ensure the Round Sign is securely fixed to the wall.
-
You are all done! Your sign should be securely installed and on display for people to see.
DISCLAIMER
George & Willy products have a lifetime warranty. This covers faulty workmanship and/or materials when the product is used in normal, domestic, or commercial conditions and following the care and use instructions provided.
It does not cover normal wear and tear, accidents, or misuse of the product. If the defect was caused by a manufacturing fault, the faulty product will be replaced free of charge. If the original product is no longer in production, it will be replaced with the most similar product.
Please keep all parts out of reach of small children as they may pose a choking risk.
CONTACT US
@georgeandwilly
www.pinterest.com/georgeandwilly/
