GEORGE WILLY Wooden Pegboard User Guide
- June 4, 2024
- GEORGE WILLY
Table of Contents
Wooden Pegboard
User Guide
Wooden Pegboard
WOODEN PEGBOARD
The Wooden Pegboard is a beautiful all-wooden shelving system that can be
adapted to suit your store, cafe, home, or office. Ideal for displaying tools,
and objects. clothing, or necessities, the Wooden Pegboard shelf display is
made from architectural-grade birch plywood.
Thank you for your purchase, George & Willy
CARE GUIDE
Where you install your product depends on its material/s. Wooden and Steel Products: We recommend using these products inside or under a shelter where they are protected from any exposure to rain or water. Aluminum Products: These products are non-corrosive and suitable for use outside. Chalk Products: You should use traditional dry chalk. We don’t recommend using liquid chalk pens on our products. Transportable Outdoor Signage: If there is exposure to wind, we recommend bringing signage inside to protect it from the extremes. We offer Sandbags to help support your product in moderate wind conditions.
COMPONENTS
| 1 x Wooden Pegboard
---|---
| 1 x Long Shelf
| 1 x Short
Shelf
| 8 x Dowels
| 6 x Wood/Drywall Screws
Chose a Suitable wall for the wooden pegboard we recommend installing it to studs to ensure that your pegboard is fixed securely.
Once you have selected and measured a wall space to mount your Pegboard onto,
fix the board onto the wall using the screws provided.
Use a drill to screw the Wooden Pegboard onto the wall ensuring that all the
screws are tight and secure.
Insert the dowels into the holes. We recommend trying out a few layouts to
find your preference.
Place the shelves on the dowels into the grooves where they will be nice and stable.
DISCLAIMER
George & Willy products have a lifetime warranty. This covers faulty
workmanship and/or materials when the product is used in normal, domestic, or
commercial conditions and following the care and use instructions provided.
It does not cover normal wear and tear, accidents, or misuse of the product.
We recommend using a qualified builder to complete the installation to reduce
the risk of damage or injury. If the defect was caused by a manufacturing
fault, the faulty product will be replaced free of charge. If the original
product is no longer in production, it will be replaced with the most similar
product.
Please keep all parts out of reach of small children as they may pose a
choking risk.
CONTACT US
@georgeandwilly
www.pinterest.com/georgeandwilly/
[email protected]
www.georgeandwilly.com