HUDORA 11054 Flitzkids 2.0 Skate Wonders Scooter Instruction Manual

: June 12, 2024
: hudora

Table of Contents

HUDORA 11054 Flitzkids 2.0 Skate Wonders Scooter
Product Information
Product Usage Instructions
TECHNICAL SPECIFICATIONS
SAFETY INSTRUCTIONS
INSTRUCTIONS ON ASSEMBLY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HUDORA 11054 Flitzkids 2.0 Skate Wonders Scooter

Product Information

Product: HUDORA Flitzkids 2.0
Item Numbers: 11054, 11062, 11063
Product Weight: Approx. 2 kg
Dimensions (when assembled): Approx. 54 x 28 x 66 cm
Maximum User Weight: 50 kg
Purpose: Roller scooter for playful learning of rolling
locomotion
For more information and assistance, visit http://www.hudora.de/

Product Usage Instructions

Assembly Instructions

The scooter will be delivered in two parts – the body and the handlebar.
Press in the safety push button at the lower end of the handlebar and push the handlebar into the opening on the scooter body, with the logo facing forward while riding. You will hear a click when the safety push button locks into place.
To adjust the handlebar height, open the quick release. If necessary, press the safety push button and adjust the handlebar stem with the grips up or down until the safety push button snaps into place at the desired position. Close the quick release.
If you have difficulty achieving a satisfactory fixation, tighten the nut on the quick release clamp.
To transform the scooter into a transport state, press the safety push button from the bottom side of the deck and pull out the handlebar.

Usage Instructions
The scooter moves when a foot is used to regularly push off. To brake, simply step on the friction brake located over the back wheel (mudguard).

DRIVING INSTRUCTIONS
The scooter moves when a foot is used to regularly push off. Braking is no problem either – simply step on the friction brake over the back wheel (mudguard).

ADJUSTMENT OF THE STEERING CONTROL
The steering of this scooter works through weight shift. In the case of very young children, it may be useful to completely block the steering. Thus the small novice rider can concentrate solely on the propulsion and the basic movement. In order to change the direction of travel, the scooter must be raised slightly and realigned. 2 fuse blocks are mounted on the underside of the front axle between the rollers (Fig. 7). In the delivery condition they are stuck on the outside of the axle carrier. Through slight lifting, lateral movement and the reset in the teeth the blocks can be completely moved into the middle. In the middle position they block the steering. Please exclusively use either the total steering block or the entirely open steering. You should in any case explain the changed steering function to the child.

Disposal Advice
At the end of the product’s life, please dispose of it at an appropriate collection point provided in your area. Contact your local waste management companies for more information.
Local waste management companies will be able to answer your questions on this.

Service
If you encounter any faults with the product, visit http://www.hudora.de/ for information on replacement parts, solutions to problems, and lost assembly manuals.
We make every effort to deliver faultless products. If faults do arise however, we put just as much effort into rectifying them. Therefore, you can find numerous information on the product, replacement parts, solutions to problems and lost assembly manuals at http://www.hudora.de/.

CONGRATULATIONS ON PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral component of the product. Therefore, please store them and the packaging carefully in case questions arise in the future. Please always include these instructions when handing on the product to a third party. This product must be assembled by an adult. This product is designed for private/domestic use only. This product is not designed for commercial/industrial use. The use of the product requires certain capabilities and skills. Always adjust according to the age of the user and use for the purpose it has been designed for.

TECHNICAL SPECIFICATIONS

Item: HUDORA Flitzkids 2.0
Item number: 11054, 11062, 11063
Item weight: approx. 2 kg
Dimensions when assembled: approx. 54 x 28 x 66 cm
Maximum user weight: 50 kg
Purpose: Roller scooter for playful learning of rolling locomotion.

If you have assembly problems or would like further information on the product, we have all you need and more at http://www.hudora.de/.

CONTENTS
1 x Body of the scooter | 1 x Handlebar | 1 x These instructions
Other items included are meant to facilitate safe transportation and are not required for the installation and use of the product.

SAFETY INSTRUCTIONS

WARNING: Protective equipment should be worn. Not to be used in traffic. 50 kg max.
The handlebar is triple secured. Before using the scooter, make sure that the handlebars are properly locked onto the scooter body . To prevent unintentional height adjustment of the handlebars, also ensure that the safety push button (fig. 4) is engaged and the quick release is closed.
This product has been designed for children aged from 2 to 6 years and is suitable only for smooth, paved surfaces. Do not use it on public roads.
The scooter is to be used by one person at a time.
Note the maximum user weight indicated in Technical Specifications.
Please ensure that your child wears the appropriate protective clothing (helmet, hand- /wrist-, elbow- and knee pads) and does not ride the scooter without shoes.
Do not allow your child to ride at dusk, at night or in poor light conditions. So that your child and others are not endangered, do not allow your child to ride on roads and in thorough-fares, on slopes and hillsides. Avoid riding close to stairs and open waters.
The functions of self-securing screw threads can be impaired after repeated loosening and tightening of the connecting elements. Check the scooter before every ride to make sure that all parts are still fixed correctly and the scooter works as it should.
Pay attention that your child keeps both hands tightly on the handlebar to have control over the scooter.
The scooter should not be used on sensitive surfaces. Such areas should, where expedient, be covered with old carpets.
The brakes may become hot, if the scooter has been used for a while! Avoid touching them during and after use until they have cooled down.
This toy has to be used with caution since the use of the product requires specific skills and knowledge to be able to avoid injury to the user and third parties through a crash or collision.
Always supervise your child when using the product!
This product contains small parts which could cause asphyxia if swallowed. Supervise children during the assembly. This product must be assembled by an adult. Children should only use the product when they are under adult supervision.

INSTRUCTIONS ON ASSEMBLY

The scooter will be delivered to you in 2 parts (body and handlebar) . HUDORA
11054 Flitzkids 2.0 Skate Wonders Scooter 01

You will have to proceed as follows in order to set up the scooter for use:
Press in the safety push button at the lower end of the handlebar and push the handlebar such that the handlebar is aligned in the envisaged opening on the scooter body, with the logo to the front while riding. You will hear a click, when the safety pushbutton locks into place (Fig 2). To adjust the handlebar height open the quick release (Fig. 3). If necessary, press the safety push button (Fig. 4) and pull the handlebar stem with the grips upwards or else push it down until the safety push button snaps into place at the desired position. Close the quick release in such a position again. Turn the nut on the quick release clamp to tighten more firmly, in the event that you have not been able to achieve a satisfactory fixation.

You will have to proceed as follows in order to again transform the scooter into a transport state:
Press the safety push button from the bottom side of the deck,

so that you can pull out the handlebar.

CARE AND MAINTENANCE
Use a dry or damp cloth only to clean the product; do not use special cleaning agents! Check the product for damage or traces of wear and tear before and after each use. Store the product in a safe place where it is protected from the elements, cannot be damaged, and cannot injure anyone. For your own safety, please use original spare parts only. These can be sourced from HUDORA. Do not make any structural changes. If parts become damaged or if sharp edges or corners should develop, the product may not be used any more. If in any doubt, please contact our service team (http://www.hudora.de/).

BEARINGS
Your kick scooter is equipped with precision ball bearings, which were filled with grease under high pressure, during manufacture. For this reason, the rollers of the kick scooter only run lightly and swiftly, while under load. Bearings are maintenance-free, but they are wear parts. Caution! Worn bearings make conspicuous audible noises and their function is constrained. In order to maintain optimal riding pleasure and to ensure lasting safety, you should replace bearings, as soon as they begin to exhibit signs of being worn. In the case of full load and daily use we recommend the replacement of the rollers and bearings twice a year. Bearings are available as accessories under http://www.hudora.de/.