QUOIZEL LWS7970C3 3 Light Semi Flush Mount Instruction Manual
- June 17, 2024
- QUOIZEL
Table of Contents
QUOIZEL LWS7970C3 3 Light Semi Flush Mount
Product Usage Instructions
Assembly
- Start by assembling the Crossbar Assembly and Ceiling Canopy.
- Connect the Wire Connector to the appropriate wires.
- Secure the Socket Assembly and Rings in place.
- Install the Rod for hanging the product.
- Refer to the provided manual for detailed assembly instructions.
Care and Maintenance
If the bulbs do not light up, follow these steps:
- Check if the light bulb needs replacement.
- If needed, replace the light bulb with a new one.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
- RISK OF ELECTRIC SHOCK – Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
- RISK OF FIRE – Use bulbs specified by the markings and/or labels on the fixture.
CAUTION
- For your safety, read instructions completely before beginning installation.
- If in doubt about electrical installation, consult a licensed electrician.
- Turn off electricity to fixture before replacing the bulb(s).
PREPARATION
- 3 BULBS REQUIRED (SOLD SEPARATELY)
- Please check with bulb manufacturer for dimming capabilities.
BULB BASE TYPE
- MEDIUM
- (E26)
BULB SHAPE
- TYPE G
BULB COMPARISON
PACKAGE CONTENTS AND TOOLS
TOOLS REQUIRED
PACKAGE CONTENTS
| PART | DESCRIPTION | QUANTITY | Stock Part# |
|---|---|---|---|
| A | Crossbar Assembly | 1pc | 915742KIT |
| B | Wire Connector | 3pcs | |
| C | Outlet Box Screw | 2pcs | |
| D | Ceiling Canopy | 1pc | N/A |
| E | Rod | 1pc | |
| F | Socket Assembly | 1pc | |
| G | Large Ring | 1pc | |
| H | Ring | 1pc |
Installation Instructions
C – If the ceiling canopy is not snug against the ceiling, remove it from the crossbar assembly. Adjust the length of the pre-assembled mounting screws by unscrewing the pre-assembled hex nut. Screw the mounting screws in or out of the crossbar until the correct length is achieved. Then, re-attach the ceiling canopy.
Wiring
Installation
CARE AND MAINTENANCE
- Wipe clean using soft, dry cloth or static duster.
- Always avoid using harsh chemicals and abrasives to clean fixture as they may damage the finish.
TROUBLESHOOTING
PROBLEM| POSSIBLE CAUSE| CORRECTIVE ACTION|
---|---|---|---
Bulbs will not light.| 1. Bulb is burned out.
2. Power is off.
3. Faulty wire connection.
4. Faulty switch.
| 1. Replace light bulb.
2. Make sure power supply is on.
3. Check wiring.
4. Test or replace the switch.
|
Fuse blows or the circuit breaker trips when light is turned on.|
Crossed wires or power wire is grounding out.|
Check wire connection.|
Contact
Thank you for purchasing this QUOIZEL product.
If you have any questions or problems, please call our customer service
department, 8:30 a.m. – 5:00 p.m., EST, Monday – Thursday, 10:20 a.m. – 5:00
p.m., EST, Friday.
For the quickest response, please visit Quoizel.com and
click on Contact Us.
- 1-844-564-3055
- E-mail:cs@quoizel.com
MADE IN CHINA