BOSCH WTH85VE6SN Tumble Dryer User Manual
- June 13, 2024
- Bosch
Table of Contents
BOSCH WTH85VE6SN Tumble Dryer
Product Information
- Product Name: Tumble Dryer
- Model Number: WTH85VE6SN
- Language: English
User Manual and Installation Instructions are available online.
Product Usage Instructions
Safety:
- Read the general information and follow the safety guidelines.
- Ensure safe installation and use of the appliance.
- Follow safe cleaning and maintenance procedures.
Preventing Material Damage:
Learn how to prevent material damage while using the tumble dryer.
**Environmental Protection and Saving
**
Energy:
- Dispose of packaging responsibly.
- Learn how to save energy while using the appliance.
- Understand the energy-saving mode feature.
Installation and Connection:
- Unpack the appliance.
- Check the scope of delivery.
- Review requirements for the installation location.
- Connect the water drain hose and align the appliance properly.
- Connect the appliance to the electricity supply.
Familiarizing Yourself with Your Appliance:
- Learn about the different parts of the appliance.
- Understand the control panel and display.
Dryness Level:
Learn how to change and adjust the dryness level according to your
preference.
Programmes:
Explore the automatic and timed programmes available.
Accessories:
Discover the accessories that can be used with the tumble dryer.
Laundry:
Prepare your laundry before using the appliance.
Basic Operation:
- Switch on the appliance.
- Select a programme and adjust the settings.
- Load the laundry and start the programme.
- Learn how to add laundry, cancel the programme, and unload the laundry.
- Switch off the appliance when not in use.
Fluff Filter:
Clean the fluff filter regularly for optimal performance.
Filter System and Condensation Container:
Understand the filter system and the condensation container in the base
unit.
Childproof Lock:
Activate or deactivate the childproof lock feature.
Basic Settings:
- Review the basic settings available for customization.
- Learn how to change these settings according to your preferences.
Cleaning and Servicing:
Get tips on cleaning and caring for the tumble dryer.
Troubleshooting:
Find solutions to common issues and problems that may arise.
Transportation, Storage, and:
Refer to the user manual for information on transportation, storage, and
maintenance of the appliance.
bMogesyncRtBwehfeorwe-egshlecidcoshoebmtevmneeirnoce.eweycfoooiatumnsnr:d/
Tumble dryer
WTH85VE6SN
[en]
User manual and installation instructions
en
Further information and explanations are available online:
Safety
Observe the following safety instructions. 1.1General information
¡ Read this instruction manual carefully. ¡ Keep the instruction manual and
the product information safe
for future reference or for the next owner. ¡ Do not connect the appliance if
it has been damaged in transit. 1.2Intended use Only use this appliance: ¡ for
drying and freshening up fabrics that are washed with water
and suitable for dryers. ¡ in private households and in enclosed spaces in a
domestic en-
vironment. ¡ up to an altitude of max. 4000 m above sea level. 1.3Restriction
on user group This appliance may be used by children aged 8 or over and by
people who have reduced physical, sensory or mental abilities or inadequate
experience and/or knowledge, provided that they are supervised or have been
instructed on how to use the appliance safely and have understood the
resulting dangers. Do not let children play with the appliance. Cleaning and
user maintenance must not be performed by children unless they are being
supervised. Keep children under the age of 3 years and pets away from the
appliance.
4
Safetyen
1.4Safe installation WARNING Risk of electric shock!
Incorrect installation is dangerous. Connect and operate the appliance only in
accordance with the
specifications on the rating plate. Connect the appliance to a power supply
with alternating cur-
rent only via a properly installed socket with earthing. The protective
conductor system of the domestic electrical in-
stallation must be properly installed. The installation must have a
sufficiently large cross section. When using a residual current circuit
breaker, only use a type with the mark. Never equip the appliance with an
external switching device, e.g. a timer or remote control. Never connect the
appliance to a circuit that is regularly switched on and off by the energy
supplier. When the appliance is installed, the mains plug of the power cord
must be freely accessible. If free access is not possible, an all-pole
isolating switch must be installed in the permanent electrical installation
according to the installation regulations. When installing the appliance,
check that the power cable is not trapped or damaged. If the insulation of the
power cord is damaged, this is dangerous. Never let the power cord come into
contact with hot appliance parts or heat sources. Never let the power cord
come into contact with sharp points or edges. Never kink, crush or modify the
power cord.
WARNING Risk of fire! It is dangerous to use an extended power cord and non-
approved adapters. Do not use extension cables or multiple socket strips. Only
use adapters and power cords approved by the manufac-
turer.
5
enSafety
If the power cord is too short and a longer one is not available, please
contact an electrician to have the domestic installation adapted. WARNING Risk
of injury!
The high weight of the appliance may result in injury when lifted. Do not lift
the appliance on your own. If this appliance is not correctly installed in a
washer-dryer stack, the installed appliance may fall. Only stack the dryer on
a washing machine using the connec-
tion kit from the dryer manufacturer “Accessories”, Page 27. No other
installation method is permitted. Do not install the appliance in a washer-
dryer stack if the dryer manufacturer does not offer a suitable connection
kit. Do not install appliances from different manufacturers and with varying
depths and widths in a washer-dryer stack. Do not install a washer-dryer stack
on a platform; the appliances may tip over.
WARNING Risk of suffocation! Children may put packaging material over their
heads or wrap themselves up in it and suffocate. Keep packaging material away
from children. Do not let children play with packaging material.
CAUTION Risk of injury! The appliance may vibrate or move when in use. Place
the appliance on a clean, even, solid surface. Align the appliance using the
appliance feet and a spirit level. If hoses and power cords have been laid
incorrectly, this causes a tripping hazard. Lay hoses and power cords in such
a way that there is no risk
of tripping. If the appliance is moved by holding onto protruding components,
such as the appliance door, the parts may break off. Do not move the appliance
by holding onto protruding parts.
6
Safetyen
CAUTION Risk of cutting! Touching sharp edges on the appliance may lead to
cuts. Do not touch the sharp edges on the appliance. Wear protective gloves
when installing and transporting the ap-
pliance. 1.5Safe use
WARNING Risk of electric shock! If the appliance or the power cord is damaged,
this is dangerous. Never operate a damaged appliance. Never pull on the power
cord to unplug the appliance. Always
unplug the appliance at the mains. If the appliance or the power cord is
damaged, immediately un-
plug the power cord or switch off the fuse in the fuse box. Call customer
services. Page 45 An ingress of moisture can cause an electric shock. Only use
the appliance in enclosed spaces. Never expose the appliance to intense heat
or humidity. Do not use steam- or high-pressure cleaners, hoses or sprays
to clean the appliance. WARNING Risk of harm to health!
Children can lock themselves in the appliance, thereby putting their lives at
risk. Do not install the appliance behind a door as this may obstruct
the appliance door or prevent it from opening. With redundant appliances,
unplug the power cord. Then cut
through the cord and damage the lock on the appliance door beyond repair so
that the appliance door will no longer close.
WARNING Risk of suffocation! Children may breathe in or swallow small parts,
causing them to suffocate. Keep small parts away from children. Do not let
children play with small parts.
7
enSafety
WARNING Risk of explosion! If there is coal dust or flour in the air around
the appliance, this may cause an explosion. Keep the area around the appliance
clean during operation.
WARNING Risk of poisoning! Condensation water from this appliance is not
suitable for drinking and may be contaminated with fluff. Do not drink or
reuse the condensation water from the appli-
ance. Detergents and care products may result in poisoning if consumed. If
accidentally swallowed, seek medical advice. Keep detergents and care products
out of the reach of children.
WARNING Risk of fire! The refrigerant R290 in this appliance is
environmentally friendly yet combustible and may ignite if it comes into
contact with open flames or ignition sources. Keep naked flames and ignition
sources away from the appli-
ance. WARNING Risk of explosion!
If there is any residual material left in the fluff filter, this may ignite
during the drying process. Clean the fluff filter regularly. Highly flammable
objects such as lighters or matches may ignite during the drying process.
Remove all highly flammable objects from any pockets in your
laundry before the drying process. Unwashed laundry that has come into contact
with solvents, oil, wax, wax remover, paint, grease or stain remover may
ignite when drying is in progress. Do not place laundry in this appliance to
be dried if the laundry
has not been washed first.
8
Safetyen
Rinse the laundry thoroughly with warm water and detergent before drying it in
the machine.
Do not use the appliance if industrial chemicals have been used to clean the
laundry beforehand. WARNING Risk of fire!
If drying is interrupted early, the laundry is not cooled sufficiently and may
ignite. Do not interrupt the drying programme early. If drying is interrupted
early, remove the laundry immediately
and spread it out. CAUTION Risk of injury!
The covering plate may break if you stand on or climb onto the appliance. Do
not stand on or climb onto the appliance. The appliance may tip over if you
sit on or lean against the open door. Do not sit on or lean against the
appliance door. Do not place any objects on the appliance door. Reaching into
the drum while it is still turning may cause hand injuries. Wait for the drum
to come to a complete stop before reaching
inside. 1.6Safe cleaning and maintenance
WARNING Risk of electric shock! Improper repairs are dangerous. Never make any
technical modifications to the appliance or its
features. Repairs to the appliance should only be carried out by trained
specialist staff. Only use genuine spare parts when repairing the appliance.
If the power cord of this appliance is damaged, it must be re-
placed by the manufacturer, the manufacturer’s Customer Service or a similarly
qualified person in order to prevent any risk.
9
enSafety
An ingress of moisture can cause an electric shock. Do not use steam- or high-
pressure cleaners, hoses or sprays
to clean the appliance. WARNING Risk of injury!
The use of non-original spare parts and non-original accessories is dangerous.
Only use the manufacturer’s original spare parts and original ac-
cessories. WARNING Risk of poisoning!
Poisonous fumes may be given off if you use cleaning agents that contain
solvents. Do not use cleaning agents that contain solvents.
10
2Preventing material Preventingmaterialdamage damage
Preventing material damage
ATTENTION! The functionality of the appliance may be impaired if you use the
wrong quantity of fabric softener, detergent, care product or cleaning agent.
Follow the dosage recommenda-
tions from the manufacturer. Exceeding the maximum load capacity impairs the
function of the appliance. Observe the maximum load capa-
city for each programme and do not exceed it. “Programmes”, Page 24 The
function of the appliance may be impaired if the appliance overheats. Keep the
ventilation opening on the appliance clear during operation. Make sure that
the area is adequately ventilated. Light objects such as hair and fluff may be
sucked in from the ventilation opening on the appliance during operation and
impair the function of the appliance. Keep the area around the appliance clean
during operation. Keep light objects away from the appliance. If you operate
the appliance without a fluff guard (e.g. fluff filter, fluff collector,
filter mat, etc., depending on appliance specifications), or if the fluff
guard is incomplete or defective, this may result in damage to the appliance.
Do not operate the appliance without a fluff guard, or with a fluff guard that
is incomplete or defective.
Preventing material damageen Foam and foam rubber may deform or melt during
the drying process. Do not dry laundry that contains
foam or foam rubber. Unsuitable cleaning products may damage the surfaces of
the appliance. Do not use harsh or abrasive de-
tergents. Do not use cleaning products with
a high alcohol content. Do not use hard scouring pads or
cleaning sponges. Clean the appliance with nothing
but water and a soft, damp cloth. Remove all detergent residue,
spray residue or other residues immediately if they come into contact with the
appliance.
3Environmental protec- Environmentalprotectionandsavingenergy tion and saving
energy
Environmental protection and saving energy
3.1Disposing of packaging
The packaging materials are environmentally compatible and can be recycled.
Sort the individual components by
type and dispose of them separately.
3.2Saving energy
If you follow these instructions, your appliance will use less power. Operate
the appliance in a well-ventilated room and keep the ventilation opening on
the appliance clear. a If air exchange is impeded, this ex-
tends the programme duration and increases energy consumption.
11
enInstallation and connection
Spin the laundry in the washing machine before drying. a Damper laundry
extends the pro-
gramme duration and increases energy consumption.
Observe the programme’s maximum load capacity. “Programmes”, Page 24 a If the
maximum load is exceeded,
this extends the programme duration and increases energy consumption.
After drying, clean the fluff filter Page 29. a If the fluff filter is dirty,
this reduces
the air flow in the appliance, extends the programme duration and increases
energy consumption.
Dry the filters in the filter system of the base unit Page 31 thoroughly after
cleaning. a If the filters are damp, this extends
the programme duration and increases energy consumption.
3.3Energy saving mode
If you do not use the appliance for an
extended period, it automatically
switches to energy-saving mode. All
displays go out and
flashes.
Energy-saving mode ends when you
use the appliance again.
4Installation and con- Installationandconnection nection
Installation and connection
4.1Unpacking the appliance
ATTENTION! Objects remaining in the drum that are not designed for operation
with the appliance may cause material damage and damage to the appliance.
Remove these objects, along with
all supplied accessories, from the drum before starting the appliance. 1.
Remove any packaging and protective covers completely from the appliance.
“Disposing of packaging”, Page 11 2. Check the appliance for visible damage.
3. Open the door. 4. Remove any accessories from the drum. 5. Close the door.
4.2Scope of delivery
After unpacking all parts, check for any damage in transit and completeness of
the delivery. ATTENTION! If the appliance is operated with incomplete or
defective accessories, the appliance may not be able to operate properly, or
this may result in material damage or damage to the appliance. Do not operate
the appliance with
incomplete or defective accessories.
12
Replace the accessories in question before operating the appliance. “Accessories”, Page 27
Included with the appliance
Description Tumble dryer
Accompanying documents
Water drain hose with connection adapter, fixing material and elbow. “Water
drain hose”, Page 14
4.3Requirements for the installation location
ATTENTION! If the appliance is tilted at an angle greater than 40°, residual
water may leak out of the appliance and cause material damage. Tilt the
appliance carefully. Transport the appliance in an up-
right position. If residual water in the appliance freezes, this may cause
damage to the appliance. Do not install or operate this appli-
ance anywhere that is liable to experience frost or outdoors.
Installation and connectionen
If the appliance is operated immediately after transportation, the refrigerant
contained in the appliance may result in damage to the appliance. Immediately
after transporting the
appliance, leave it to rest for two hours before putting it into operation.
Installation loca- Requirements tion
On the floor
Place the appliance on a clean, level and firm surface. Align the appliance Page 16.
13
enInstallation and connection
Installation loca- Requirements tion
In a washer-dryer Only use the ori-
stack
ginal connection
set from the
dryer manufac-
turer when set-
ting up this appli-
ance in a
washer-dryer
stack.
¡ Connection kit
with pull-out
worktop
Page 27
¡ Connection kit
Page 27
This appliance must only be stacked on a washing machine from the same manufacturer. The depth and width of this appliance must correspond with the dimensions of the washing machine. Do not place the washer-dryer stack on a platform.
Against a wall
Do not trap the hoses and power cord between the wall and the appliance.
container. Use the water outlet hose to drain away excess condensation
directly into the waste water system. Notes ¡ Operate this appliance using the
water outlet hose provided. “Connecting the water drain hose”, Page 14 If you
connect the water outlet hose, you do not have to regularly empty the
condensation container. “Emptying the condensation container”, Page 32 ¡ You
can order this optional “Accessories”, Page 27 from our customer service.
Connecting the water drain hose If you do not want to regularly empty the
appliance’s condensation container, connect the water outlet hose.
ATTENTION! When operating the appliance without the water drain hose being
connected properly, liquid may leak out of the connecting piece. Before
operating the appliance,
connect the water drain hose properly to the connecting piece.
Requirements ¡ The appliance and the accessory
have been unpacked. “Unpacking the appliance”, Page 12 ¡ The appliance is
installed at the installation location. “Requirements for the installation
location”, Page 13
4.4Water drain hose
Condensation that forms in the appliance as it dries the laundry is collected
by default in the condensation
14
1. Pull out the condensation hose from the connecting piece.
Installation and connectionen 3. Push the water drain hose as far
as it will go into the connecting piece.
The condensation hose is connected to the connecting piece at the factory. Note: When removing the condensation hose, liquid may leak out of the connecting piece. 2. Push the condensation hose into the holder.
4. Insert the water drain hose into the hose guide.
Ensure that you do not bend the water drain hose. 5. Connect the appliance to the water outlet. “Water outlet connection types”, Page 16 Tip: To collect condensation in the condensation container again (e.g. if you change where the appliance is located), carry out these steps in reverse order.
15
enInstallation and connection
Water outlet connection types
ATTENTION! In the event of a blocked or covered outlet, accumulated wastewater
can flow back into the appliance. Before operating the appliance, en-
sure that the wastewater drains away quickly and eliminate any blockages.
Drainage into a siphon.
Drainage into a wash basin. Drainage into a gully.
Secure the connection point with a (12-22 mm) hose clamp. Secure the water
outlet hose with a hose guide at a height of at least 80 cm and no more than
100 cm. Note: You can use the Y-distributor Page 27 to connect the water drain
hose of an additional appliance, such as a washing machine, to the same siphon
outlet.
Push the water drain hose fully through the elbow Page 13 and secure it using
fixing material. Secure the elbow at a height of no more than 100 cm.
Push the water drain hose fully through the elbow Page 13
16
and secure it using fixing material. Secure the elbow to the gully.
4.5Aligning the appliance
In order to reduce vibrations and noises, align the appliance correctly. To
align the appliance, turn the ap-
pliance feet. Check that the appliance is level using a spirit level.
All appliance feet must stand firmly on the ground.
4.6Connecting the appliance to the electricity supply
1. Insert the mains plug of the appliance’s power cable in a socket nearby.
The connection details of the appliance can be found under Technical data Page
47.
2. Check the mains plug is inserted properly.
Familiarising yourself with your applianceen
5Familiarising yourself with your appliance
Familiarisingyourselfwithyourappliance
Familiarising yourself with your appliance
5.1Appliance
You can find an overview of the parts of your appliance here.
6
5
4 3
2
1
On certain models, specific details such as the colour and shape may differ from those pictured.
1 Ventilation opening
2
Maintenance flap on the base unit Page 35
3 Fluff filter Page 29
4 Door
5
Condensation container Page 32
6 Control panel Page 18
17
enFamiliarising yourself with your appliance
5.2Control panel
You can use the control panel to configure all functions of your appliance and
to obtain information about the operating status.
2
3
1
1
4
1 Programmes Page 24
2
Programme selector Page 28
3 Display Page 19
4 Buttons Page 21
18
Displayen
6Display Display
The Display display shows the current settings, options or relevant
information.
Display 0:40 1 1:25 10h 1
1 Example
Description Expected programme duration or programme time remaining in hours
and minutes. The timed programme is set. “Timed programmes”, Page 26 Program
end time “Buttons”, Page 22 ¡ Lights up: The childproof lock is activated. ¡
Flashes: The childproof lock is activated and the appli-
ance has been operated. “Deactivating the childproof lock”, Page 33 Start,
cancel or pause ¡ Lights up: The programme is running and can be cancelled or
paused. ¡ Flashes: The programme can be started or continued. The adjusted
dryness level is activated. “Dryness level”, Page 23
The crease-reduction function is activated. “Buttons”, Page 21 Gentle drying
is activated for delicate fabrics. “Buttons”, Page 21 Empty and insert the
condensation container. “Emptying the condensation container”, Page 32 Clean
the fluff filter. “Cleaning the fluff filter”, Page 29 Clean the filter system
on the base unit. “Cleaning the filter system on the base unit”, Page 31
19
enDisplay Display Hot
-PEnd 1 Example
Description The cooling process cools the laundry for a few minutes while the drum is rotating, in order to avoid damage to the laundry. The cooling process can be cancelled by opening the door. Note: Do not change the set programme. Drying Programme status Dryness level: Iron Dry Programme status Dryness level: Cupboard Dry Programme status Crease-reduction function Programme status Pause Programme status Program end Programme status
20
Buttonsen
7Buttons Buttons
Below Buttons is an overview of the buttons and their setting options.
Button 3 sek.
Selection ¡ Start ¡ Cancel ¡ Pause ¡ Activate ¡ Deactivate
¡ ¡ ¡
¡ Activate ¡ Deactivate
¡ Activate ¡ Deactivate
Description Start, cancel or pause the programme.
Activate or deactivate the childproof lock. Disable the control panel to
prevent unwanted or accidental operation. If the childproof lock is activated
and the appliance has been switched off, the childproof lock remains
activated. “Childproof lock”, Page 33 Adjust the dryness level. If the laundry
feels too damp after it has been dried to a particular dryness level, you can
adjust the dryness level. “Adjusting the dryness level”, Page 23 Activate or
deactivate the crease-reduction function. Once the programme has ended, the
drum moves the laundry at regular intervals for 60 minutes to prevent
creasing. Activate or deactivate gentle drying. The temperature is reduced for
delicate fabrics, e.g. polyacrylic or elastane. The programme duration is
extended.
21
enButtons Button
Selection Up to 24 hours
Multiple selection
Description Set the programme end time. The programme duration is already included in the set number of hours. Once the programme has started, the programme duration is displayed. Set the programme duration for timed programmes. “Timed programmes”, Page 26
22
Dryness levelen
8Dryness level Drynesslevel
Each Drynesslevel automatic programme has a specified dryness level. The
dryness level defines how dry or damp your laundry is after the programme
ends.
Programme Laundry
Drying result
Cotton Cup- Multi-layered, thick laundry The laundry is dry. board Dry Ex- that does not dry readily. tra Easy Care Cupboard Dry Extra
Cotton
Normal, single-layered
Cupboard Dry laundry.
Easy Care
Cupboard
Dry
The laundry is dry.
Cotton Iron Dry Easy Care Iron Dry
Normal, single-layered laundry.
The laundry is still slightly damp. To prevent creasing after drying, iron the laundry or hang it up.
8.1Changing the dryness
2. Press .
level
For some automatic programmes,
a The display shows , or .
you can change the dryness level so
that your laundry will be drier or more
damp.
Set an automatic programme with the desired dryness level.
“Automatic programmes”,
Page 24
8.2Adjusting the dryness level
If the laundry feels too damp after it has been dried to a particular dryness
level, you can adjust the dryness level. 1. Set an automatic programme with
the desired dryness level. “Automatic programmes”, Page 24
23
enProgrammes
9Programmes Programmes
You Programmes can dry your fabrics using either an automatic programme or a timed programme.
9.1Automatic programmes
Automatic programmes are programmes in which humidity sensors measure the
residual moisture in the laundry during the drying cycle. The programme only
ends once the set dryness level is reached. Each automatic programme has a
dryness level Page 23. The dryness level defines how dry or damp the laundry
is after the programme ends.
Tips ¡ Select the dryness level according
to the type of fabric or the desired drying result. “Dryness level”, Page 23 ¡
The laundry’s care labels provide you with additional information about
programme selection.
Programme
Description
Cotton Cupboard Dry Extra
Dry hard-wearing, heat-resistant fabrics made of cotton or linen. The dryness level is not defined in this programme. “Dryness level”, Page 23
Cotton Cupboard Dry hard-wearing, heat-resistant fabrics
Dry
made of cotton or linen.
The dryness level is not defined in this
programme.
“Dryness level”, Page 23
Cotton Iron Dry
Dry hard-wearing, heat-resistant fabrics made of cotton or linen. The dryness level is not defined in this programme. “Dryness level”, Page 23
Easy Care Cupboard Dry Extra
Dry items made of synthetic materials or blended fabrics. The dryness level is not defined in this programme. “Dryness level”, Page 23
Easy Care Cupboard Dry
Dry items made of synthetic materials or blended fabrics. The dryness level is not defined in this programme. “Dryness level”, Page 23
Max. load (kg) 8.0
8.0
8.0
3.5
3.5
24
Programme Easy Care Iron Dry Mix Down
Sport Shirts/Blouses
Rapid 40′ Towels
Programmesen
Description
Max. load
(kg)
Dry items made of synthetic materials or 3.5 blended fabrics. The dryness level is not defined in this programme. “Dryness level”, Page 23
Dry items made of cotton and synthetics. 3.0
Dry clothing, bedspreads or eiderdowns 1.5 stuffed with down. Notes ¡ Dry
large items of laundry, such as
blankets or sleeping bags, separately. ¡ Once the programme has ended, shake
the items of laundry to distribute the stuffing and eliminate any pockets of
moisture. ¡ If you dry the pillows and the pillows are not completely dry at
the end of the programme, dry the pillows with a timed programme. “Timed
programmes”, Page 26
Dry self-drying sportswear made of per- 1.5 formance fibres, microfibres and synthetics.
Suitable for shirts and blouses made of 1.5 cotton, linen, synthetics or blended fabrics. Note: For optimal drying results, dry a maximum of 5 shirts or 5 blouses at the same time. Once the laundry is dry, iron it or hang it up. The residual moisture is then distributed evenly.
Dry items made of synthetics and light
1.0
cotton.
Dry hard-wearing, heat-resistant towels
6.0
and dressing gowns made of cotton or
linen.
25
enProgrammes
9.2Timed programmes
Timed programmes are programmes with a defined or adjustable programme
duration. The programme ends once this time has elapsed, even if the laundry
is still not dry, for example. Timed programmes are suitable for drying
individual items of laundry or thin fabrics. Tip: The laundry’s care labels
provide you with additional information about programme selection.
Programme Wool Finish
Time Program Cold
Time Program Warm
Description
Max. load
(kg)
Dry machine-washable items made of
0.5
wool or containing wool.
Note: The laundry becomes fluffier but not dry.
Remove laundry once the programme has
ended and allow it to dry.
Fluff/loosen all fabric types except for
3.0
wool and silk.
This programme is suitable for fluffing dry
laundry only.
Also suitable for freshening up or airing
dry clothing that has hardly been worn.
Dry all types of fabric except for wool and 3.0 silk. Suitable for pre-dried or slightly damp laundry and for drying off multi-layered, thick laundry.
26
Accessoriesen
10Accessories Accessories
Use Accessories original accessories. These have been made especially for your appliance. Note: Some accessories are available in other colours. Contact “Customer Service”, Page 45.
Connection kit Connection kit with pullout worktop
Y-distributor Water drain hose Filter mat Platform
Use
Order number
To save space, stack the WTZ20410 appliance on a suitable washing machine of the same width and depth and that is from the same manufacturer.
To save space, stack the WTZ11400 appliance on a suitable washing machine of the same width and depth and that is from the same manufacturer. The pull-out worktop makes it easier to load and unload the appliance.
Connect the water drain 15000490 hose of an additional appliance to the same siphon outlet.
Drain away excess condensation directly into the waste water system, without having to regularly empty the condensation container.
WTZ1110
Spare part to protect
12007650
against fluff for the base
unit’s filter system.
Install the appliance at a WTZPW20D raised height so that it can be easily loaded and unloaded.
27
enLaundry
11Laundry Laundry
Laundry
11.1Preparing the laundry
ATTENTION! Objects remaining in the laundry may damage the laundry and the
drum. Remove all items from any pock-
ets in your laundry before using the appliance. Note The appliance and fabrics
are protected when you prepare your laundry. ¡ Brush off sand and soil ¡ Sort
the laundry according to colour and textiles and observe the care labels ¡
Close all zips, Velcro fasteners, hooks and eyes ¡ Remove curtain fittings and
lead strips ¡ Load the laundry unfolded into the drum ¡ Spin the laundry
before drying
12Basic operation Basicoperation
Basic operation
12.1Switching on the appliance
Requirement: The appliance has been correctly installed and connected.
“Installation and connection”, Page 12 Turn the programme selector to a
programme. Note: The lighting for the drum goes out automatically.
12.2Setting a programme
1. Turn the programme selector and set the required programme. “Programmes”,
Page 24
2. If required, adjust the programme settings. “Adjusting the programme
settings”, Page 28
12.3Adjusting the programme settings
Depending on the programme and programme progress, you can adjust or
activate/deactivate the settings. Requirement: A programme is set. “Setting a
programme”, Page 28 Adjust the programme settings.
“Buttons”, Page 21 Note: The programme settings are not saved permanently for
the programme.
12.4Loading laundry
Note: To prevent creasing, note the maximum load for the programmes.
“Programmes”, Page 24 Requirements ¡ The laundry is prepared and sor-
ted. “Laundry”, Page 28 ¡ The drum is empty. 1. Open the door. 2. Place the
laundry in the drum. 3. Close the door. Ensure that there is no laundry
trapped in the door.
12.5Starting the programme
Requirement: A programme is set. “Setting a programme”, Page 28 Press .
28
a The display shows the programme duration or the programme end time.
a After the programme has ended, the display shows: “End ” .
Note: If “Hot ” appears, the appliance cools the laundry. When “Hot ” goes
out, the laundry has cooled down.
12.6Changing the activated programme end time
You can repeatedly change the set and activated programme end time before
starting the programme. Requirements ¡ The programme is set.
“Setting a programme”, Page 28 ¡ The programme end time is set
and activated. “Buttons”, Page 22 1. Press . The activated programme end time
is paused. 2. Press until the display shows the required programme end time.
3. Press . The changed programme end time is activated.
12.7Adding laundry
After the programme starts, you can remove or add laundry at any time. 1.
Press .
The cooling process starts automatically after approximately 30 seconds and
cools down the laundry while the drum is rotating. If you want to avoid or
cancel the cooling process, open the door. “Display”, Page 20 2. Open the
door. 3. Add or remove laundry. 4. Close the door.
Basic operationen 5. Press .
12.8Cancelling the programme
1. Press . 2. Open the door. 3. Remove the laundry.
“Unloading the laundry”, Page 29
12.9Unloading the laundry
1. Open the door. 2. Remove the laundry from the
drum.
12.10Switching off the appliance
Turn the programme selector to Off .
12.11Fluff filter
During drying, fluff from the laundry is collected in the fluff filter. The
fluff filter protects the appliance from fluff. Cleaning the fluff filter If
the drying programme has finished or the display shows a notification while
the appliance is in operation, clean the fluff filter. Note: If you do not
clean the appliance as described, the appliance’s functionality may be
impaired. Requirements ¡ The display shows the following
after drying: “End ” ¡ or the display shows the following
during operation: . 1. Open the door.
29
enBasic operation 2. Remove the fluff from the door.
5. Disconnect the two-part fluff filter.
3. Remove the two-part fluff filter.
6. Open the two fluff filters.
4. Remove the fluff from the recess.
7. Remove the fluff.
Ensure that no fluff falls into the air channel. 30
8. Clean the two fluff filters thoroughly under warm, running water and then
dry them off.
9. Close the two fluff filters and put them together.
10.Insert the two-part fluff filter.
Basic operationen
12.12Filter system on the base unit
During drying, fluff from the laundry is collected in the base unit’s filter
system. The filter system protects the appliance from fluff.
Cleaning the filter system on the base unit If the display shows a
notification while the appliance is in operation, clean the base unit’s filter
system. Notes ¡ You can clean the filter regularly
system even without the notification being shown on the display. It is not
necessary to clean after each drying cycle. ¡ If you do not clean the
appliance as described, the appliance’s functionality may be impaired.
Requirement: The display shows the following during operation: . 1. Clean the
fluff filter Page 29. 2. Open the base unit Page 35. 3. Carefully remove the
filter mat from the retainers.
11.Close the door.
Ensure that you do not deform or damage the filter mat.
31
enBasic operation 4. Use a soft brush to clean the heat
exchanger cover.
6. Push the filter mat onto the retainers.
Make sure that you remove all dirt from the seal. 5. Clean the filter mat thoroughly under warm, running water and squeeze it out by hand. You can remove heavy soiling carefully using a vacuum cleaner. Do not clean the filter mat using cleaning products.
Ensure that the cleaned filter mat is not deformed, damaged or inverted when
you push it onto the retainers. Note: You can order the filter mat Page 27 as
a spare part from customer service. 7. Close the base unit Page 37.
12.13Condensation container
Condensation that forms in the appliance as it dries the laundry is collected
by default in the condensation container. Note: Operate this appliance using
the water outlet hose provided. “Connecting the water drain hose”, Page 14 If
you connect the water outlet hose, you do not have to regularly empty the
condensation container. “Emptying the condensation container”, Page 32
Emptying the condensation container If the drying programme has finished or
the display shows a notification while the appliance is in operation, empty
the condensation container.
32
Requirements ¡ The display shows the following
after drying: “End ” ¡ or the display shows the following
during operation: . 1. Pull out the condensation con-
tainer, keeping it level.
Childproof locken
Inserting the condensation container Push the condensation container
in as far as it will go.
2. Empty the condensation container. Make sure that you insert the condensation container before operating the appliance. “Inserting the condensation container”, Page 33
13Childproof lock Childprooflock
Secure Childprooflock your appliance against being operated unintentionally using the controls.
13.1Activating the childproof lock
Press and hold the two
3
sek. buttons for approx.
3 seconds.
a The display shows .
a The control elements are locked.
a The childproof lock remains active
even after the appliance has been
switched off and in the event of a
power cut.
13.2Deactivating the childproof lock
Requirement: To deactivate the childproof lock, the appliance must be switched on.
Press and hold the two
3
sek. buttons for approx.
3 seconds.
a goes out in the display.
33
enBasic settings
14Basic settings Basicsettings
You Basicsettings can configure the basic settings for your appliance to meet
your needs.
14.1Overview of the basic settings
Basic setting Programme position
End signal
3
Button signal 4
Washing ma- 2 chine spin speed
Value
Description
0 (off) 1 (quiet) 2 (medium) 3 (loud) 4 (very loud) 0 (off) 1 (quiet) 2
(medium) 3 (loud) 4 (very loud) Example: 600 (low)
1800 (high)
Set the volume of the signal at the end of the programme. The volume of the audible signal emitted when the buttons are pressed. Set the spin speed of the washing machine. The set value increases or decreases the displayed duration of the automatic programmes.
34
14.2Changing the basic settings
1. Set the programme selector to position 1.
2. Press
and, at the same time,
turn the programme selector to po-
sition 2.
a The display shows the current value.
3. Set the programme selector to the required position. “Overview of the basic settings”, Page 34
4. To change the value, press / .
5. To save the changes, switch off the appliance.
Cleaning and servicingen
nothing but water and a damp cloth.
Remove all detergent residue, spray residue or other residues immediately.
Fresh deposits are easier to remove without leaving any residue.
Leave the appliance door open after use.
This allows the residual water to dry, reducing odours in the appliance.
15.2Base unit
The base unit is the accessible area at the bottom of the appliance in which
you will find the heat exchanger.
Opening the base unit Requirements ¡ The appliance has cooled down
for 30 minutes. ¡ The appliance door is closed. 1. Open the maintenance flap.
15Cleaning and servi- Cleaningandservicing cing
To keep your appliance working effi- Cleaningandservicing ciently for a long time, it is important to clean and maintain it carefully.
15.1Tips on cleaning and care
Wipe down the housing and the controls with
This ensures the parts of the appliance will remain clean and hygienic.
If you place a cloth beneath the maintenance flap, you can collect the
remaining water from the base unit.
35
enCleaning and servicing 2. Open the lever for the heat ex-
changer cover.
2. Use a soft brush to clean the heat exchanger cover.
3. Pull out the heat exchanger cover by the handle.
Make sure that you remove all dirt from the seal. 3. Carefully clean the fins on the heat exchanger with a vacuum cleaner and brush attachment.
Cleaning the base unit You can remove any visible dirt in the base unit.
CAUTION Risk of cutting! Touching sharp edges on the heat exchanger may lead
to cuts. Do not touch the fins on the heat
exchanger. 1. Open the base unit Page 35.
Ensure that you vacuum the fins from top to bottom so that they do not become deformed or damaged.
36
4. Clean the opening with a soft, damp cloth.
Cleaning and servicingen 3. Close the maintenance flap.
5. Close the base unit Page 37. Closing the base unit Requirement: The base
unit is open. “Opening the base unit”, Page 35 1. Insert the heat exchanger
cover by
the handle.
2. Close the lever for the heat exchanger.
15.3Moisture sensor
The moisture sensor in this appliance measures how damp the laundry is during
the drying cycle. The appliance changes the duration of the automatic
programme depending on the residual moisture in the laundry. Cleaning the
moisture sensor Over time, residue from limescale, detergents and care
products can build up on the moisture sensor. Clean the moisture sensor
regularly.
ATTENTION! Hard or rough objects may damage the moisture sensor. Do not use
hard or rough objects,
abrasive cleaning products or steel wool for cleaning.
Note: If you do not clean the appliance as described, the appliance’s
functionality may be impaired. 1. Open the door.
37
enCleaning and servicing 2. Clean the moisture sensor with a
sponge.
38
Troubleshootingen
16Troubleshooting Troubleshooting
You Troubleshooting can rectify minor faults on your appliance yourself. Read
the troubleshooting information before contacting after-sales service. This
will avoid unnecessary costs.
WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to
the appliance should only be carried out by trained specialist
staff. Only use genuine spare parts when repairing the appliance. If the power
cord of this appliance is damaged, it must be replaced by the
manufacturer, the manufacturer’s Customer Service or a similarly qualified
person in order to prevent any risk.
Fault “Hot ” and the drum rotates.
Cause and troubleshooting Cooling process active. 1. Not a fault. 2. Do not
change the programme during the cooling
process.
Humming noise.
The display goes out
and
flashes.
Note: The cooling process takes up to 10 minutes. You can continue to operate the appliance. Compressor active. Not a fault normal operating noise. Energy-saving mode is active Press any button. a The display lights up again.
Fluff filter is soiled. “Cleaning the fluff filter”, Page 29 The base unit’s
filter is soiled. “Cleaning the filter system on the base unit”,
Page 31
The appliance is not working.
The mains plug of the power cord is not plugged in. Connect the appliance to
the power supply. The circuit breaker in the fuse box has tripped. Check the
circuit breaker in the fuse box. There has been a power cut. Check whether the
lighting in your room or other
appliances are working.
Appliance paused, but Cooling process active. the drum is rotating. Not a fault no action required.
39
enTroubleshooting
Fault
Cause and troubleshooting
Creasing.
The load is too large. Observe the maximum load capacity of the
“Programmes”, Page 24.
The laundry lies in the drum for too long after drying. 1. Remove the laundry
from the drum as soon as the
drying programme has finished. 2. Spread the items of laundry for cooling.
Unsuitable programme for the type of fabric. Set the suitable programme for
the type of fabric.
“Programmes”, Page 24
Easy-Care fabrics are dried for too long. “Changing the dryness level”, Page 23. “Adjusting the dryness level”, Page 23.
Anti-Crease not activated. Activate the Anti-Crease function.
“Buttons”, Page 21
and programme terminated.
Condensation tank filled. 1. “Emptying the condensation container”, Page 32. 2. “Inserting the condensation container”, Page 33. 3. “Starting the programme”, Page 28.
Water drain hose is caught or jammed. 1. Ensure that the water drain hose is
not kinked or
trapped. 2. Route the water drain hose without kinks.
Water drain hose is not connected correctly. Ensure that the water drain hose
is connected cor-
rectly. “Connecting the water drain hose”, Page 14
Water drain hose is blocked. Rinse the water drain hose with tap water.
Foreign object is located in the base unit 1. “Opening the base unit”, Page 35. 2. Remove the foreign objects that are present. 3. “Closing the base unit”, Page 37.
Condensation in the The remaining volume of condensation may remain in
condensation tank
the condensation container.
even though the water drain hose is connected.
Not a fault no action required. Water drain hose is not connected correctly.
40
Troubleshootingen
Fault
Cause and troubleshooting
Condensation in the Ensure that the water drain hose is connected cor-
condensation tank
rectly.
even though the water “Connecting the water drain hose”, Page 14
drain hose is connec-
ted.
The programme does Childproof lock is activated.
not start.
“Deactivating the childproof lock”, Page 33
has not been pressed. Press .
No programme set. 1. “Setting a programme”, Page 28. 2. “Starting the programme”, Page 28.
The length of the pro- The programme operation is optimised electronically. gramme changes dur- This may change the programme duration. ing the drying cycle. Not a fault no action required.
Pumping noise.
Condensation pump active. Not a fault normal operating noise.
Buzzing noise.
Compressor ventilation active. Not a fault normal operating noise.
The drying time is too The base unit’s filter is soiled.
long.
“Cleaning the filter system on the base unit”,
Page 31
Fluff filter is soiled. “Cleaning the fluff filter”, Page 29
The ambient temperature is greater than 30 °C. Ensure that the ambient
temperature is below 30
°C.
The ambient temperature is lower than 15 °C. Ensure that the ambient
temperature is above
15 °C.
Insufficient air circulation at the appliance’s installation location. Ventilate the appliance’s installation location.
The appliance’s ventilation opening is blocked. Ensure that the ventilation
opening of the appliance
is kept clear.
Heat exchanger is soiled. 1. Opening the base unit.
“Opening the base unit”, Page 35.
41
enTroubleshooting
Fault The drying time is too long. Water is leaking from the appliance.
The laundry is too damp.
Cause and troubleshooting 2. Cleaning the heat exchanger.
“Cleaning the base unit”, Page 36. 3. Closing the base unit.
“Closing the base unit”, Page 37. Appliance is not correctly aligned.
“Aligning the appliance”, Page 16 The seal for the heat exchanger cover is
dirty. Clean the seal for the heat exchanger cover.
“Cleaning the filter system on the base unit”, Page 31 Water drain hose is not
connected correctly. Ensure that the water drain hose is connected correctly.
“Connecting the water drain hose”, Page 14 The lever for the heat exchanger
cover is not closed correctly. Ensure that the lever for the heat exchanger
cover is closed correctly. “Closing the base unit”, Page 37 Unsuitable
programme for the type of fabric. Set a timed programme for the subsequent
drying. “Programmes”, Page 24 There has been a power cut. Check whether the
lighting in your room or other appliances are working. The load is too large.
Observe the maximum load capacity of the “Programmes”, Page 24. After the end
of the programme, warm laundry feels damper than it actually is. 1. Remove the
laundry from the drum as soon as the drying programme has finished. 2. Spread
the items of laundry for cooling. Unsuitable dryness level set. “Changing the
dryness level”, Page 23. Drying target not adjusted. “Adjusting the dryness
level”, Page 23. Load too small. Set a timed programme for the subsequent
drying. “Programmes”, Page 24
42
Fault The laundry is too damp.
Troubleshootingen
Cause and troubleshooting Moisture sensor dirty. “Cleaning the moisture
sensor”, Page 37. The drying process is interrupted and the condensation tank
has been filled. 1. “Emptying the condensation container”, Page 32. 2.
“Inserting the condensation container”, Page 33. 3. “Starting the programme”,
Page 28.
43
enTransportation, storage and disposal
17Transportation, stor- Transportation,storageanddisposal age and disposal
Transportation, storage and disposal
17.1Preparing the appliance for transportation
ATTENTION! If the appliance is operated immediately after transportation, the
refrigerant contained in the appliance may result in damage to the appliance.
Immediately after transporting the
appliance, leave it to rest for two hours before putting it into operation.
Tip: The appliance may contain residual water, which may drip out of it when
transported. The appliance should be transported upright. Requirements ¡ The
condensation container is
emptied. Emptying the condensation container Page 32 ¡ The appliance has been
switched on. “Switching on the appliance”, Page 28 1. Set any programme Page
28. 2. Start the programme Page 28 and wait 5 minutes. a The condensation is
drained. 3. Switch off the appliance. “Switching off the appliance”, Page 29
4. Remove the water drain hose from the connection point. “Water outlet
connection types”, Page 16 5. Secure the water drain hose on the appliance
against unintentional loosening. Ensure that you do not bend the water drain
hose.
6. Empty the condensation container Page 32.
7. Insert the condensation container Page 33.
8. Disconnect the appliance’s mains plug from the power supply.
a The appliance is now ready to be transported.
17.2Disposing of old appliance
Valuable raw materials can be reused by recycling.
WARNING Risk of harm to health! Children can lock themselves in the appliance,
thereby putting their lives at risk. Do not install the appliance behind
a door as this may obstruct the appliance door or prevent it from opening.
With redundant appliances, unplug the power cord. Then cut through the cord
and damage the lock on the appliance door beyond repair so that the appliance
door will no longer close.
WARNING Risk of fire! The refrigerant R290 used in this appliance is
environmentally friendly. It is however flammable and may ignite if appliances
are not disposed of properly. Dispose of the appliance properly. Do not damage
the tubing of the
refrigerant circuit. 1. Unplug the appliance from the
mains. 2. Cut through the power cord. 3. Dispose of the appliance in an en-
vironmentally friendly manner.
44
Information about current disposal methods are available from your specialist
dealer or local authority.
This appliance is labelled in accordance with European Directive 2012/19/EU
concerning used electrical and electronic appliances (waste electrical and
electronic equipment – WEEE). The guideline determines the framework for the
return and recycling of used appliances as applicable throughout the EU.
Customer Serviceen
18.1Product number (E-Nr.) and production number (FD)
You can find the product number (ENr.) and the production number (FD) on the
appliance’s rating plate. Depending on the model, the rating plate is located:
¡ On the inside of the door. ¡ On the inside of the maintenance
flap. ¡ On the rear of the appliance. Make a note of your appliance’s details
and the Customer Service telephone number to find them again quickly.
18Customer Service CustomerService
Function-relevant CustomerService genuine spare parts according to the
corresponding Ecodesign Order can be obtained from Customer Service for a
period of at least 10 years from the date on which your appliance was placed
on the market within the European Economic Area. Note: Under the terms of the
manufacturer’s warranty the use of Customer Service is free of charge.
Detailed information on the warranty period and terms of warranty in your
country is available from our aftersales service, your retailer or on our
website. If you contact Customer Service, you will require the product number
(ENr.) and the production number (FD) of your appliance. The contact details
for Customer Service can be found in the enclosed Customer Service directory
or on our website.
45
enConsumption values
19Consumption values Consumptionvalues
The programme Consumptionvalues Cotton Cupboard Dry
(denoted by the arrow symbol) is suitable for drying cotton laundry with a
normal dampness level, and is the most efficient programme for drying damp
cotton laundry in terms of combined energy consumption. The consumption values
for this programme that are declared on the energy label refer to a moisture
content of the laundry of 60%. The values given for other programmes are
indicative only and were determined in accordance with the applicable standard
EN61121.
Programme
Final moisture level (%)
Load (kg)
Cotton Cupboard 0.0
8.0
Dry
Cotton Cupboard 0.0
4.0
Dry
Cotton Cupboard 0.0
8.0
Dry
Cotton Cupboard 0.0
4.0
Dry
Cotton Cupboard 0.0
8.0
Dry
Cotton Cupboard 0.0
4.0
Dry
Cotton Iron Dry
12.0 8.0
Cotton Iron Dry
12.0 4.0
Cotton Iron Dry
12.0 8.0
Cotton Iron Dry
12.0 4.0
Cotton Iron Dry
12.0 8.0
Cotton Iron Dry
12.0 4.0
The actual values may deviate from the indicated values depending on the type of fabric, composition of laundry to be dried, residual moisture in the fabric, set degree of dryness, amount of laundry being loaded, environmental conditions and the activation of additional functions. The expected programme duration/”Ready in” time that is shown on the appliance display when selecting the programme is based on the spin speed in the washing machine of 1000 rpm when the appliance is delivered.
Spin speed (rpm)
Initial moisture level (%)
1400 50
Programm e duration (h:min) 3:01
Energy consumption (kWh/ cycle) 1.63
1400 50
1:56 1.00
1000 60
3:25 1.87
1000 60
2:10 1.14
800
70
3:50 2.11
800
70
2:25 1.28
1400 50
1400 50
1000 60
1000 60
800
70
800
70
2:16 1:23 2:40 1:37 3:05 1:52
1.21 0.70 1.45 0.84 1.69 0.98
46
Programme
Final moisture level (%)
Load (kg)
Easy Care Cupboard 2.0
3.5
Dry
Easy Care Cupboard 2.0
3.5
Dry
Spin speed (rpm)
Initial moisture level (%)
800
40
Technical dataen
Programm e duration (h:min) 1:12
Energy consumption (kWh/ cycle) 0.60
600
50
1:24 0.71
20 Technical data Technicaldata
Technical data
Appliance height Appliance width Appliance depth Appliance depth with door
closed Appliance depth with door open Weight Maximum load Mains voltage
Minimum installation protection Nominal power Power consumption
Ambient temperature
Length of the power cord
84.2 cm 59.8 cm 61.3 cm 66.5 cm
110.5 cm
48.2 kg 8.0 kg 220-240 V, 50 Hz 10 A
625 W ¡ Off mode:
0.10 W ¡ Left-on mode:
0.75 W ¡ Minimum:
5 °C ¡ Maximum:
35 °C 145 cm
This product contains light sources from energy efficiency class F. These light sources are available as a spare part and must only be replaced by trained specialist staff. You can find more information about your model online at https:// eprel.ec.europa.eu/1. This web address is linked to the official EU EPREL product database. Please then follow the instructions on searching for the model. The model identifier is made up of the characters before the slash in the product number (E-Nr.) on the rating plate. Alternatively, you can also find the model identifier in the first line of the EU energy label.
1 Only applies to countries in the European Economic Area 47
Thank you for buying a Bosch Home Appliance!
Register your new device on MyBosch now and profit directly from:
· Expert tips & tricks for your appliance · Warranty extension options ·
Discounts for accessories & spare-parts · Digital manual and all appliance
data at hand · Easy access to Bosch Home Appliances Service
Free and easy registration also on mobile phones: www.bosch-home.com/welcome
Looking for help? You’ll find it here.
Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service directory.
BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München, GERMANY www.bosch-
home.com
A Bosch Company
9001883851
9001883851 (030823) en
Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom
References
- Home Appliances Global Website | Bosch
- Home Appliances Global Website | Bosch
- Bosch Service | Service worldwide
- Welcome to MyBosch