Apps 365GPS Mobile APP User Manual
- June 17, 2024
- APPs
Table of Contents
Apps 365GPS Mobile APP
Product Specifications
- Network: 2G/4G (depends on device band support)
- Positioning methods: GPS+BDS+AGPS+Wifi+LBS
- Tracking system: APP+Web Track+historical trace playback
- Geo-Fence and Playback SOS (Microphone and speaker required)
- GPS location time:
- Cold Boot-38s (Open sky)
- Warm Boot-2s (Open sky)
- GPS location accuracy: within 10 meters of outdoor
- Wifi location accuracy: within 50 meters of indoor
- LBS location accuracy: above 100 meters indoor
- Working temperature: -20 to 45°C
- Working humidity: 20% to 95%
Product Usage Instructions
Preparation Work
- Prepare a 2G/4G nano SIM card compatible with the device’s bands.
- Ensure the SIM card has enough data plan (around 30MB LTE/GPRS per month).
- Download and install the free mobile APP from the user manual.
FAQ
- Q: How do I reset my password if I forget my device IMEI or password?
- A: Please contact our after-service/sales timely for assistance in resetting your password.
Main feature
- Network: 2G/4G — depends on the device which bands support
- Positioning methods: GPS+BDS+AGPS+Wifi+LBS
- Tracking system: APP+Web
- Track+historical trace playback
- Geo-Fence and Playback
- SOS(Microphone and speaker are required)
- GPS location time:
- Cold Boot-38s(Open sky); Warm Boot-2s(Open sky）
- The specific time is affected by the environment
- GPS location accuracy: within 10 meters of outdoor
- Wifi location accuracy: within 50 meters of indoor
- LBS location accuracy: above 100 meters indoor
- GPS tracker Working temperature: -20℃～45℃
- GPS tracker working humidity: 20%～95%
Preparation work
- Please prepare a 2G/4G nano SIM card, (Please check our device 4G bands with your SIM card provider ), For a new SIM card, you can put it in your phone to active it and check the data and VoLTE function, it’s better to set off the PIN code of the sim card.
- Please make sure the SIM card for the GPS tracker have enough data plan, normally, our GPS tracker will consume around 30MB LTE/GPRS data per month.
- Download and install the free mobile APP from the user manual.
Power on the GPS and make GPS online
Open the SIM slot cover and put in the SIM card correctly
Note
- A: Recharging the tracker(with battery included) for 1 hour before using it.
- B: make sure the tracker is power off before you put in the SIM card.
Power On: Press the power key for 3 seconds till 3 LEDs are on together.
You may meet the following condition after you power on the device for 1-2
minutes
- A: Yellow led slow blinking, this means the track is online in the APP already, you can use it directly.
- B: Yellow LED fast blinking, this means the LTE data has not gotten through yet, you need to set APN by SMS/AT command, you can find the related SMS command at the end of the user manual.
- C: Yellow LED get solid, which means the sim card is invalid/ out of balance/ not compatible with the device, you need to change to other valid sim cards for the device.
Power off: Press the power key for 8 seconds till 3 LEDs are on together, then all LEDs will off and the device power off.
LED Light
|
Function
|
Slow Blinking
|
Fast Blinking
|
LED off // solid
---|---|---|---|---
Red
|
Battery level
| Battery level above
30%
|
Low battery
| Power off/sleep
mode//recharging
Yellow
|
SIM signal
|
GPS tracker online
|
GPS tracker offline
| sleep mode/power
off//invalid SIM
Blue| GPS Signal| GPS tracker online| Searching GPS| Power off/sleep mode
Login to the GPS tracker in the APP/Web
Please use the mobile APP to track the GPS tracker when the device’s yellow
led blinks slowly, that means the tracker is online in the APP.
(You can also track the GPS tracker through our free Web)
There is an individual QR code sticker including 15 digits IMEI with each unit device, the available method to log the APP:
- Input the device IMEI and password manually
- Scan the QR code and it will log in to the app automatically
Login ID: IMEI number
Password: The last 6 digits of the device IMEI
(If you forgot your device IMEI or password, please contact our after-
service/sales timely for assistance)
APP UI And Main Functions
Tips: The way to extend device battery duration:
- a: “Setting”–> “Update time” set longer interval
- b: “Function”–>“Power saving”
The difference of the 3 positioning methods are below:
The differences among the positioning methods are below:
-
GPS positioning: when the GPS tracker works outdoors where the GPS signal is available and stable, it will capture the GPS satellite signal and show you an accurate GPS location on the map.
-
Wifi positioning: when the GPS tracker works in a place where the GPS signal is weak/not available, but if there are stable multiple wifi signals available around the tracker, for example: in your home/office/mall, the GPS will capture the wifi router MAC address automatically and show the wifi geometric center as the wifi location on the map.
(Note: Wifi location function was prohibited in some regions in the world, for example, Germany, USA ) -
LBS positioning: when both GPS and Wifi signal is not available to the GPS tracker, it will give you a general location according to the nearest 4G signal tower around it and show that location on the map.
GPS tracker location accuracy:
- GPS: below 10 meters outdoor.
- Wifi: below 100 meters(wifi signal valid range normally covers 100 meters maximum.)
- LBS: above 100 meters, normally, if the tracker stays in the city, the LBS location accuracy will be much more accurate than that stay in the countryside.
Function
The APP function UI is as the below-left image, you can choose the function
you need directly.
Playback & Security scope(Geo-fence)
- A: When you need to know the tracker’s historical trace during a period, please choose the start time and end time and other options in the APP to check the historical trace of your GPS tracker and show it on the map as below.
- B: You can set a security range on the map in your app, once your GPS tracker location gets out of the preset safe range, you will get an alarm alert from the APP.
Information
- You can get all of the GPS tracker Alert Messages from the “Information” menu. For example, SOS alarm, vibration alarm, Geo-fence alert, low battery alert, manual location Fect to know the GPS tracker operation history.
- Please enable the “Push Notification” in “Setting”->” ON OFF” to get necessary device push notification messages.
Power saving(To extend the battery duration)
Setting
- Map Setting: you can choose different map options.
- Update time: you can choose different location uploading intervals according to your requirement, the longer interval the lower battery consumption.
- Modify password: please keep the password carefully after you modify the default password.
- ON OFF: please enable/disable the necessary options according to your requirements.
- Factory data reset: when the GPS tracker is online in the app, you can use this option to clear all device data and make it back to factory setup, the password will back to default as well.
Related SMS Commands
Warning: The SMS commands for 2G and 4G GPS trackers are independent of each other.
A:2G GPS tracker SMS command
- Inquire IMEI No.: “imei# “, if you lost the tracker imei number, you can send this SMS command to get the GPS tracker IMEI #.
- Restore default password: “post”
- Restore to the factory settings: “1122”
- Set Upload interval: “time#minute”(minute range 1-120minute); “md#second”(second range 10-60seconds)
- Turn on/off LED: “ LED#on, LED#off”
- APN settings: “APN#parameter#account#password#” if there’s no account and password, you can send “APN#parameter#” only.
- Remote Restart: “cyst”
- Vibration Alarm: “6666#on# / 6666#off#”
- Heartbeat Packet Time: heartbeat#No.#(no.=second)
- Turn off GPRS data and location function: link#0#
- Turn on GPRS data and location function: link#1#
- Control Auto Power On/Off: “pwonoff#day, hour, minute#day, hour, minute” (for example: pwonoff#0,0,10#0,2,0 — mean: the GPS tracker will work for 10 minutes then power off and after 2 hours later it will power on automatically again.)
- 000#number#number#number# (binding three phone # ), this SMS command can be used for sound callback
B: 4G GPS tracker SMS command — Version.1:
- IMEI query: IMEI#
- Interval setting: TIMER, X,Y# (X=GPS tracker moving status interval, Y=GPS tracker idle status interval)
- Interval query: TIMER#
- Reboot: REST# (Device will reboot after 5 seconds)
- Power off: POWEROFF# (can be powered on manually or by recharging only)
- Status query: STA#
- APN setting: APN, X,Y, Z# (X=SIM card apn parameter, Y=SIM card APN user name, Z= SIM card APN password)
- Factory restore: FACTORY#
C: 4G GPS tracker SMS command — Version.2:
- Device ID query: DEVICEID#
- APN setting: APN#APN parameter#user name#password# (if the sim card doesn’t have a user name and password, keep it in blank)
- Reboot: SYSRST# ( Device will reboot automatically in 1 minute)
- Restore to factory setup: 1122#
- Device information: INFO#
Note: there may be a bit of APP UI difference after our GPS device and mobile APP upgrade in the future.
GPS Tracker User Manual
Scan the QR code to download free mobile APP or search “365GPS ” in Google
Playstore / Apple store
- Tracking platform: www.365gps.net.
- Android APP: 365GPS
- iOS APP: 365GPS
- Login ID: IMEI number (15 digits)
- Default password: The last 6 digits of IMEI
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>