JBC W3533 Grips for WS440 Wire Stripper Tweezers Instruction Manual
- June 4, 2024
- JBC
Table of Contents
JBC W3533 Grips for WS440 Wire Stripper Tweezers
This manual corresponds to the following reference: 0023533 green
Packing List
The following items are included:
- Grips for WS440 Wire Stripper Tweezers … 2 units
- Fitters ………. 2 units
- Manual ……… 1 unit
Changing Grips
Replace the grips easily using the included fitters like shown in the following pictures.
-
Inserting Fitters
Insert the fitters into the new grip. -
Placing Fitters
Place the fitters inserted into the grip at the top of the tweezers. The flattened side of the grip faces inwards. -
Assemble Grip
Push the grip with the fitters onto the wire stripper tweezers. -
Removing Fitters
To remove the fitters, hold the grip and pull the fitters out. Use pliers if necessary.
Specifications
- Grip Dimensions: 26 x ø21 mm / 1.02 x ø0.83
- Total Net Weight: 4.6 g / 0.010 lb
- Package Dimensions/Weight: 90 x 55 x 40 mm / 16.3 g
(L x W x H) 3.54 x 2.17 x 1.57 in / 0.036 lb
Complies with CE standards. ESD safe.
Warranty
JBC’s 2 year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labour. Warranty does not cover product wear or misuse. In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased.
DISPOSAL
This product should not be thrown in the garbage. In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must be collected and returned to an authorized recycling facility.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>