Newell Watt Meter User Manual

June 12, 2024
Newell

Newell Watt Meter

SAFETY INSTRUCTIONS

Before using the product, please read the following instruction manual carefully and keep it for future reference. When transferring the product to a third party, it is advisable to include the instructions

  1. Do not expose to water or other sources of moisture.
  2. Do not expose to high temperatures.
  3. Keep out of the reach of children.
  4. Unplug the device from the mains before cleaning. Do not use liquid or aerosol cleaners.
  5. If the device is not used for a long time, unplug it from the power outlet. This is done to provide protection against lightning and power surges.
  6. Do not use the wattmeter if it is damaged.
  7. If you notice smoke or a strange smell coming from the device, immediately disconnect the power supply. Do not disassemble the device yourself. Disassembling the device will void the warranty. If there are problems with the device, bring it to an authorized service center.
  8. Take the used equipment to a suitable waste collection point, it must not be placed together with other municipal waste.

DESCRIPTION OF FUNCTIONS

Plug the wattmeter into a household electrical socket to start measuring. Connect your electrical appliances to the wattmeter. The meter measures power in watts and electricity consumption in kWh. It shows the cost of running an appliance and helps users reduce their electricity bill and carbon footprint by monitoring and controlling their energy consumption. You get control over how much power is used by your items such as TV, fridge, microwave, etc. It has an advanced history chart function of past days/weeks/months of daily consumption. This provides a proper perspective of your electricity consumption.

DESCRIPTION OF OPERATION

First, remove the plastic cap from under the battery compartment cover so that the data will be retained when the meter is disconnected from the power supply or during a power failure.

  • While pressing the “ENERGY/+” button ” the LCD display will show the voltage, current in amps, power in watts, frequency, and power factor.
  • By pressing the “HISTORY” button repeatedly, the LCD will show the consumption, KWh (unit of electricity) daily, weekly, and monthly.
  • By pressing the ‘COST’ button repeatedly, the LCD will show the power in watts on the top line and the second line will show the total cost, tariff or electricity rate, multiple tariff information (advanced function), carbon dioxide information, elapsed time, total KWh consumed.

Reset button (green)
Press the small green button inside with a pencil or fingernail to reset all historical data.

Setting the clock
To set the clock, press the ‘COST/-‘ button to see the time screen, then hold the ‘SET/OK’ button for 3 seconds, (!) will flash. Press “HISTORY” to select the digit position. Press the “ENERGY/”or “COST/-“button to change the digits. Finally, press the “OK” button to finish. The device will log out of the current settings after 10 seconds if no action is performed and save the old settings.

Changing 12/24H
On the clock screen, press “HISTORY” and “ENERGY/+* and hold for more than 3 seconds.

Newell-Watt-Meter-fig-3

Setting the tariff (electricity rate, charge per KWH)
Press “COST/-” to return to the tariff screen, then press “SET/OK” for 3 seconds. When “TARIFF !” flashes, press “ENERGY/+” or “COST/-“to select “TARIFF |” or “DUAL TARIFF”, then press “HISTORY” to confirm. Use the “HISTORY” button to move to the digit position and use the “ENERGY/” and “COST/- buttons to change the digit. Press the ‘SET/OK’ button to set it.

If a simple “TARIFF I” tariff is selected, simply set the “TARIFF |” rate and then press the “SET/OK” button to save all parameters. The unit will enter the initial display mode. The range starts from 0.00 COST/ KWh. Once set, press”SET/OK” to confirm. For example, you can set 0.14 for a rate of 0.14 per kWh of electricity in your region.

If ‘DUAL TARIFF’ is selected, press ‘HISTORY’ to the correct position, then press ‘ENERGY/+’ or’ ‘COST/-‘ to make the setting,

Setting the tariff time 1
On the “TIME START” screen, press “HISTORY” then press “ENERGY/+” or “COST/-” to set the time. To confirm, press the “OK” button.

Setting tariff 2
Press the “HISTORY” button to select the blinking number (second row on the display), then press the “ENERGY/+” or “COST/-” button to set the rate (range 0.000~9999COST/KWH). Once selected, press the “OK” button to confirm.

Setting tariff time 2
Go to the “TIME START” screen, and press “HISTORY”. Select the appropriate item, and press “ENERGY/+” or “COST/-” to set the time. When you have finished selecting the digits, press the “OK” button.

Clock and electrical display
Start the appliance. The clock is displayed in the second row. Press “COST/-” to see the electrical rate you have set.

Accumulated time

When the device detects a consumption of more than 2W, it will start timing and logging the energy consumption data.

Range of accumulated electrical power 0.000 KWh~9999 KWh.

Range of accumulated electricity charge 0.00 COST~9999 COST.

Cost of tariff 1 0.00 COST/KWh~9999 COST/KWh.

Duration of tariff 1.
Cost of tariff 2 0.00 COST/KWh~9999 COST/KWh.

Duration of tariff 2.
Volume Kg CO2 0.00~9999 KG GO2/KWh

Total volume Kg CO2 0.00~9999KG CO2.

LOAD SETTING
Press the “ENERGY/+” button to select the “OVERLOAD” screen. Press the “SET/OK” button for more than three seconds to enter “OVERLOAD” Watt. When “W” is flashing, press the “ENERGY/+” or “COST/-” button to set “W” or “A*

Notes
If you press the button but do not perform any action, the OVERLOAD will automatically end. When the power of the current load exceeds the pre-set overload parameter, “OVERLOAD” will flash, indicating that this is unsafe and raising safety concerns. The system considers 3680 W as the starting parameter.

SETTING CO2

Press “COST/-” to the Co2 screen, then hold the “SET/OK” button for 3 seconds to set it. Press “HISTORY” to select an item, then press “ENERGY/+* or “COST/-“‘ to set, then press “SET/OK” to save.

ENERGY CONSUMPTION HISTORY
Press “HISTORY” to change the screen. The initial setting is 1 bar= 1 KWH. If the actual power consumption is too high to be displayed by 1 KWH, it will automatically change to 2/3 KWh.

Power consumption in days/weeks/months

To see the daily energy consumption for the last 7 days, press “HISTORY” for 3 seconds when the screen is in “day” mode, then press “ENERGY/+” or ‘COST/-“to select the day you want. The daily energy consumption will be displayed in the second row. To see the weekly energy consumption for the last 7 weeks press “HISTORY” for 3 seconds when the screen is in “weekly” mode, press “ENERGY/+” or “COST/-” to select the week. The energy consumption for the week will be displayed in the second row. To see the monthly energy consumption for the last 7 months, press “HISTORY” for 3 seconds when the screen is in “monthly”, and press “ENERGY/+” or “COST/-” to select the desired month. The monthly energy consumption will be displayed in the second row.

How to quickly clear/delete data
Press “ENERGY/+” and “COST/-” for 3 seconds until the screen starts flashing
Then press “SET/OK” for 3 seconds. All data will be deleted.

Backlight mode
Plug in, the backlight lights up immediately. If you do not press any button, the backlight goes out within 10 minutes. If any of the buttons are pressed, the backlight will light up again. (The backlight only works when connected to AC power,
the backlight will not work when using batteries).

TECHNICAL SPECIFICATIONS

  • Time display range 0 seconds 9999 days
  • Power display range 0.000~9999 watts
  • Voltage display range 0.000~9999 V
  • Current display range 0.000~999999 A
  • Electricity rate display range 0.000~9999 COST/KWH
  • The total consumption cost range from $0.000~9999 K
  • Total energy consumption range 0.000~9999 KWh

Operating Range

Newell-Watt-Meter-fig-21

BATTERY REPLACEMENT
Remove the battery cover on the back and insert 2 X 1.5V (LR44/AG13). Batteries are used for data storage (memory function).

IN CASE OF ERRORS

  1. Please check that the device is well connected to the power supply.
  2. Please check that the device is securely connected to the equipment.
  3. Please check if the battery in the device is connected correctly.
  4. Please press the “RESET” button to reset the default settings.

WARNINGS

  1. For indoor use only.
  2. Only for use in dry conditions.
  3. Use only within the limits of the maximum load. The manufacturer reserves the right to change the information contained in this manual without prior notice.

WASTE MANAGEMENT

The crossed-out trashcan symbol means that waste electrical and electronic, batteries, and packaging must not be placed with other household waste. They must be handed over to a separate waste collection system.

WARRANTY

Newell products are covered by a 40-month manufacturer’s warranty. RESCUE Made in China, In China herge stellt, Hecho en China

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Newell User Manuals

Related Manuals