Newell Universal Charger E-Scooter Multi Set Instruction Manual
- June 10, 2024
- Newell
Table of Contents
Newell Universal Charger E-Scooter Multi Set
Product Information:
This product comes with a user manual that contains important information and instructions for usage. Please note that the manufacturer reserves the right to change the information contained in the manual without prior notice. It is important to refer to the most up-to-date version of the manual for accurate information.
Product Usage Instructions:
- Before using this product, carefully read through the user manual provided.
- Ensure that you understand all of the instructions and information provided in the manual.
- Follow the instructions provided in the manual for proper usage and maintenance of the product.
- If you have any questions or concerns about the usage of this product, please refer to the user manual or contact the manufacturer for assistance.
Before using the product, please read the following instruction manual carefully and keep it for future reference. When transferring the product to a third party, it is advisable to include the instructions.
SAFETY INSTRUCTIONS
- Do not charge batteries that are not intended for this product. It may damage the battery and cause leakage, explosion, personal injury, and property damage. • Use indoors or in a vehicle. Do not expose to rain or snow.
- Do not disassemble. Do not leave unattended.
- Do not drop or place heavy objects on the device.
- For use by adults.
- The charger can operate in a temperature range of OOC – 400C.
- Keep away from heat sources and high temperature areas and do not expose to direct sunlight.
- The charger will heat up slightly, but it is normal.
- The batteries should be removed from the charger when it is not in use.
- Dispose of used batteries according to the guidelines in the manual.
SET CONTENT SPECIFICATION
CHARGING
- Choose the adapter that corresponds to the socket on the scooter from the three available in the kit
- Connect the adapter to the connector on the power adapter
- Connect the power adapter to an electrical outlet in the wall
- Connect the adapter to the socket on the scooter
The red LED indicates charging.
When the LED turns green, charging is complete.
- The manufacturer reserves the right to change the information contained in this manual without prior notice.
WASTE MANAGEMENT
The crossed-out trashcan symbol means that waste electrical and electronic equipment, batteries and packagings must not be placed with other household waste. They must be handed over to a separate waste collection system.
WARRANTY
Newell products are covered by a 40-month manufacturer’s warranty.
Made in China