BARATZA Virtuoso Plus Coffee and Espresso Grinder User Manual

: June 17, 2024
: BARATZA

Table of Contents

BARATZA Virtuoso Plus Coffee and Espresso Grinder
Product Information
Product Usage Instructions
INITIAL SETUP
Parts Identification
CHOOSING A GRIND SETTING
PROGRAMMING
IF YOU NEED FURTHER SUPPORT
SAFETY INFORMATION
Documents / Resources

BARATZA Virtuoso Plus Coffee and Espresso Grinder

BARATZA-Virtuoso-Plus-Coffee-and-Espresso-Grinder-
product

Product Information

Specifications

Hopper Lid: Hand-wash in warm, soapy water
Hopper: Hand-wash in warm, soapy water
Black Silicone Gasket: Hand-wash in warm, soapy water
Ground Coffee Bin: Hand-wash in warm, soapy water
Ring Burr: Do not wash in water to prevent rust
Grind Setting Indicator: Position to the right and align with the black triangle marker on the case
Grind Adjustment Ring: Rotate fully counterclockwise before installing the hopper

Product Usage Instructions

Initial Setup

Hand-wash the hopper lid, hopper, black silicone gasket, and ground coffee bin in warm, soapy water. Dry thoroughly.
Do not wash the removable ring burr in water to prevent rust.
Place the gasket on top of the ring burr, aligning the gasket notches with the ring burr tabs.
Gently work the gasket down until it is seated on the top 1/8 (4mm) of the ring burr.
To install the hopper, ensure the silver grind setting indicator is positioned to the right and aligned with the black triangle marker on the case.
Press the hopper down and twist clockwise to setting 20. You should hear a click as the hopper rotates.
If Step 4 is not working well, rotate the black grind adjustment ring fully counterclockwise using the adjustment ring tabs for leverage.

Choosing a Grind Setting
Rotate the hopper to adjust to your desired grind setting. When adjusting finer, the grinder must be running or empty to prevent the adjustment system from binding on beans that are between the burrs. Coarser grind settings require higher numbers of beans. Below are some general settings to start with for a variety of brew methods:

Espresso: Suggested Setting – 8
AeroPress: Suggested Setting – 12
Hario V60: Suggested Setting – 15
Automatic Brewer: Suggested Setting – 18
Chemex: Suggested Setting – 20
French Press: Suggested Setting – 28

Note:
Do not fill the grounds bin above the indicated fill line to prevent the grinder from becoming plugged and requiring unclogging.

Programming
Grind time is adjusted by rotating the dial. Clockwise rotation increases grind time in 1.0-second increments, and counterclockwise rotation decreases grind time in 0.1-second increments. To manually grind, press the dial in for 3 seconds to enter Pulse mode, then press and hold the dial to grind. Rotating the dial exits pulse mode.

FAQ

If I need further support, how can I contact Baratza?
In the US & Canada, you can contact support@baratza.com or call 425-641-1245 or toll-free 877-701-2021.
What should I do if I think my grinder is not performing correctly?
You can visit the troubleshooting guides at baratza.com/troubleshooting for assistance.

INITIAL SETUP

For the full manual, visit baratza.com/documentation.

Hand-wash the hopper lid (1), hopper (2), black silicone gasket (4), and ground coffee bin (9) in warm, soapy water, and dry thoroughly. Do not wash the removable ring burr (5) in water or it will rust.
The ring burr (5) has a red tab and it should be pointing to grind setting 30.
Be careful not to tear the gasket. Place the gasket (4) on top of the ring burr (5), align the gasket notches with the ring burr tabs (one of which is red) and gently work the gasket down until it is seated on the top 1⁄8” (4mm) of the ring burr (5).
To install the hopper, ensure the silver grind setting indicator (3) is positioned to the right, and aligned with the black triangle marker on the case. Press the hopper down and twist clockwise to setting 20. You should hear the hopper click as it rotates. If Step 4 is not working well: The black grind adjustment ring (12) must be rotated fully counterclockwise for the hopper to install. You can rotate the grind adjustment ring (12) by hand, using the adjustment ring tabs (13) for leverage, if needed and then continue from step 3.

Parts Identification

BARATZA-Virtuoso-Plus-Coffee-and-Espresso-Grinder-
fig-1

Hopper Lid
Bean Hopper
Grind Setting indicator
Black Silicone Gasket*
Removable Ring Burr
Grind Adjustment Scale
LED Display
Dial
Grounds Bin with Max Fill Line
Brush*
Weighted Base
Grind Adjustment Ring
Adjustment Ring Tab
Burr Alignment & Lifting Tabs
Center Cone Burr

included in the grounds bin

CHOOSING A GRIND SETTING

Rotate the hopper to adjust to your desired grind setting. When adjusting finer, the grinder must be running or completely empty of beans to prevent the adjustment system from binding on beans
that are between the burrs. Below are some general settings to start with for a variety of brew methods. You will need to dial in the grind to your preference from here.

Finer Grind = lower numbers
Coarser Grind = higher numbers

Additional information can be found atbaratza.com/grinding- tips

| Espresso| AeroPress| Hario V60| Automatic Brewer| Chemex| French Press
---|---|---|---|---|---|---
Suggested Setting| 8| 12| 15| 18| 20| 28

Do not fill the grounds bin above the indicated fill line or the grinder may become plugged and require unclogging.

PROGRAMMING

See the operations manual for full details: baratza.com/documentation.

Grind time is adjusted by rotating the dial. Clockwise rotation increases grind time in 1.0-second increments, and counterclockwise rotation decreases grind time in 0.1-second increments. Rotate clockwise until just above the desired time, then rotate counterclockwise to the setting. The adjustment range is a loop that continues from 40.0 to 1.0. To manually grind, press the dial in for 3 seconds to enter Pulse mode, then press and hold the dial to grind. Rotating the dial exits pulse mode.

IF YOU NEED FURTHER SUPPORT

In US & Canada contact support@baratza.com or 425-641-1245 or toll free 877-701-2021
If you think your grinder is not performing correctly, go to our troubleshooting guides at baratza.com/troubleshooting.
Outside North America, the warranty is provided by the company you purchased from. For service, find the nearest importer at baratza.com/international-importers-and-retailers.

SAFETY INFORMATION

Please read the information below very carefully. It contains important safety information for this appliance. Please keep these instructions for future reference.

Use only with AC and the correct voltage. See the label on the base of the grinder to determine the correct voltage.
Only clean the grinder housing with a dry or slightly damp cloth. Do not immerse the grinder, plug or cord in water or any other liquid.
Baratza will not accept any liability for damage, injury, or warranty if the grinder is used other than for its intended purpose (i.e. grinding roasted whole coffee beans) or is improperly operated or repaired.
Do not operate the grinder with a damaged cord or plug. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons to avoid a hazard.
Keep the appliance and its cord out of reach of children aged less than 8 years.
Do not leave your grinder unattended while turned ON.
This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
Cleaning and user maintenance shall not be done by children without supervision.
Always unplug the grinder from the electrical supply before assembling, disassembling or cleaning. To unplug, grasp the plug and remove it from the outlet. Never pull on the cord.
CAUTION: ALWAYS unplug the electrical supply cord before cleaning the grinder.

WWW.BARATZA.COM

Documents / Resources

| BARATZA Virtuoso Plus Coffee and Espresso Grinder [pdf] User Manual
Virtuoso Plus Coffee and Espresso Grinder, Virtuoso Plus, Coffee and Espresso Grinder, Espresso Grinder, Grinder
---|---