Newell Air Artha LED Light User Manual

Newell Air Artha LED Light

SAFETY INSTRUCTIONS

Before using the product, please read the following instruction manual carefully and keep it for future reference. When transferring the product to a third party, it is advisable to include the instructions.

1. The lamp is a precision device. Do not drop, hit, crush or expose to any shock.
2. The unit is not dustproof or waterproof. Store in a dry, cool and ventilated place. Do not expose to water or other sources of moisture.
3. Do not use near flammable materials and solvents.
4. Do not use the lamp too close to objects. Do not cover the ventilation holes. Do not insert metal parts into the lamp. Do not touch the electrical parts with conductive
5. The lamp can operate in a temperature range of 0°C – 40°C.
6. The lamp will heat up slightly, but it is normal.
7. Do not stare directly at the LED panel that is turned on, it may cause eye damage.
8. Do not use the LED outside in direct sunlight for a long time.
9. Disconnect the power supply for storage or transportation.
10. Allow the unit to cool down before placing it in the package.
11. For use by adults.
12. If you notice smoke or a strange smell coming from the device, immediately disconnect the power. Do not disassemble. Disassembling the unit will void the warranty. If there are problems with the lamp, bring it to an authorized service center.

Maintenance
Use a dry and soft cloth to clean the unit. Do not clean with water. A little neutral detergent on the cloth to remove stubborn dirt. Do not use strong detergents such as thinner, benzine or alcohol as they may damage the protective coatings.

PRODUCT DESCRIPTION

Characteristic
Artha is an LED lamp designed in a slim version and giving soft light. The aluminum housing provides cooling for the device. Built with 136pcs 3200K and 136pcs 5600K, 2835-type LEDs, using backlight technology to generate very soft light. To adapt the light to the ambient conditions, the brightness can be adjusted from O – 100%, and the color temperature is 3200K to 5600K. Thanks to the built-in bracket, it is possible to position the panel in any 360° range, which allows perfect adjustment of the adjustment of the light. The use of a high-efficiency converter reducing voltage and DC efficiency scale, makes each diode utilizes the maximum potential. With the help of the LCD display, we can easily read the current brightness, color temperature and state of charge of the battery. The lamp is powered by one or two NP-F type batteries (sold separately ) or a power adapter (included).

Construction

1. Light plate
2. Angle adjustment knob
3. Fixed knob
4. Fixed seat
5. Battery compartments
6. Remove the button battery
7. Power switch
8. DC plug
9. Brightness color temperature adjustment knob
10. Color temperature control button
11. Brightness control button
12. LCD display

INSTALLATION AND USAGE

Installation

1. Loosen the mounting knob (figure 1) .
2. Place the end of the tripod in the socket of the holder (figure 2).
3. Tighten the fixing knob clockwise (figure 3).

Angle adjustment

1. Loosen the mounting knobs on both sides of the panel.
2. Adjust the desired tilt angle.
3. Tighten the fixing knobs.

Power supply

1. Battery power supply
   Place the NP-F series battery in the slot until it locks into place. Turn on the device with the button on the left side shifting the to the “I” position. Moving the power switch to the “0” position, turn off the device completely.

2. Power supply
   Insert the plug into the socket of the DC power supply. From this point on, the device uses exclusively from the AC adapter. Set the power switch to the “II” position.

3. To turn it off
   Moving the power switch to the “O” position turns the device off completely.

Function

1. Display
   Once the device is up and running the display will show brightness, color temperature and battery charge status.

2. Brightness control
   After starting up, press the “brightness adjustment button” . On the display, the brightness value will flash once. By turning the adjustment knob, change the brightness to the desired.

3. Color temperature adjustment
   After starting up, press the “color temperature adjustment button”. On the display, the color temperature value will flash once. By turning the knob adjustment, change the color temperature to the desired temperature.

PRODUCT SIZE

SPECIFICATION

Product purpose

LED number

| Ideal for a wide range of applications in photography and filming

5600K cool color136PCS and 3200K warm color 136PCS

---|---
Maximum power| 35W
Maximum illuminance| 1000LUX/1m
Color temperature range| 3200/5600K (Built-in adjustment)
Color rendering index| CRI >95
Display mode| LCD display
Functions| Brightness levels, color temperature, battery
Control mode| Three-stage adjustment
Dimming range| 0-100%
Power supply mode| Adapters15V 3A

Sony NP – F series battery

Connectors| DC socket
Net weight| About 1550g
Working environment temperature| 0° N35°c
Storage temperature| -10° N 50°c
Relative humidity| 20% – 80%
Product size| 407 mm x 31 mm x407 mm

The manufacturer reserves the right to change the information contained in this manual without prior notice

WASTE MANAGEMENT

The crossed-out trashcan symbol means that waste electrical and electronic, batteries and packagings must not be placed with other household waste. They must be handed over to a separate waste collection system.

WARRANTY

Newell products are covered by a 40-month manufacturer’s warranty.

Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>