Newell Air 650i LED Light Instruction Manual
- June 10, 2024
- Newell
Table of Contents
Newell Air 650i LED Light
SAFETY INSTRUCTIONS
Before using the product, please read the following instruction manual carefully and keep it for future reference. When transferring the product to a third party, it is advisable to include the instructions.
- The lamp is a precision device. Do not drop, hit, crush or expose to any shock.
- The unit is not dustproof or waterproof. Store in a dry, cool and ventilated place. Do not expose to water or other sources of moisture.
- Do not use near-flammable materials and solvents.
- Do not use the lamp too close to objects. Do not cover the ventilation holes. Do not insert metal parts into the lamp. Do not touch the electrical parts with conductive materials.
- The lamp can operate in a temperature range of 0’C – 40’C.
- The lamp will heat up slightly, but it is normal.
- Do not stare directly at the LED panel that is turned on, it may cause eye damage.
- Do not use the LED outside in direct sunlight for a long time.
- Disconnect the power supply for storage or transportation.
- Allow the unit to cool down before placing it in the package.
- For use by adults.
- If you notice smoke or a strange smell coming from the device, immediately disconnect the power. Do not disassemble. Disassembling the unit will void the warranty. If there are problems with the lamp, bring it to an authorized service center.
Maintenance
- Use a dry and soft cloth to clean the unit. Do not clean with water. A little neutral detergent on the cloth to remove stubborn dirt.
- Do not use strong detergents such as thinner, benzine or alcohol as they may damage the protective coatings.
PRODUCT DESCRIPTION
Characteristic
The 650i is an LED lamp designed in slim version, giving soft light. Built with 96pcs. 3200K LED and 96pcs. 5600K, using backlight technology to generate very soft light. The brightness can be adjusted from 0N100% and the color temperature from 3200K to 5600K to adapt the light to the environment. With the included bracket, it is possible to position the panel at a 90-degree angle, allowing the light to be perfectly adjusted. The use of a high- efficiency voltage-reducing converter and a DC efficiency scale ensures that each diode uses its maximum potential. Thanks to LCD display, you can easily read the current brightness, color temperature and battery charge status. The built-in 29.6 Wh lithium-polymer battery provides about 90 minutes of operation. The included power adapter, 15 V 2 A, will charge the battery to full in about 2 hours.
Construction
- Outer frame
- Diffuser
- Handle fixing screw
- Foot fixing screw
- Tilt angle adjustment knob
- Ventilation holes
- Display
- Brightness adjustment knob
- Color temperature adjustment knob
- ON/OFF button
- DC power socket
INSTALLATION AND USE
Installation
- Remove the lamp and a mount from the package. Fit the mount into the¼ inch socket at the bottom of the lamp and tighten the mounting screw.
- Attach the lamp to the camera/camera shoe and tighten the mounting screw.
Angle adjustment
- Loosen the tilt angle adjustment knob.
- Set the desired angle of the panel.
- Tighten the tilt angle adjustment knob.
Charging
- Use the included power adapter.
- Plug the power adapter into the DC socket on the lamp. The battery charge indicator on the display will blink.
- When the battery is fully charged, the indicator will light up with a steady light.
Functions
- Turn the device on and off by moving the button to the ON / OFF position.
- Display
- When the device is turned on, the display backlight will start, showing the brightness level, color temperature and battery level.
- Brightness adjustment knob
- With the device on, use the brightness adjustment knob to change the brightness.
- Turning clockwise, increase the brightness (up to 100%, in 1% increments).
- Color temperature adjustment knob
- To change the color temperature, use the color temperature adjustment knob (range: 3200K to 5600K, in 100K increments).
PRODUCT SIZE
- Units: mm
- Tolerances: ± 1.0mm
- L = 268
- W = 26
- H = 188
SPECIFICATION
| Product purpose | Ideal for a range of applications in photography and filming |
|---|---|
| LED number | 96 pcs – 5600K; 96pcs – 3200K |
| Maximum power | 19,5W |
| Maximum illuminance | 650 LUX/ 1m |
| Color temperature range | 3200K-5600K |
| Color rendering index | CRI >95 |
| Display mode | LCD display |
| Dimming range | 0-100% |
| Power supply mode | 29,6 Wh Built-in polymer batteries |
| Built-in batteries specification | 3,7V 4000 mAh x 2pcs |
| Charger specification | DC 15V 2A |
| Power supply connector | DC 2,5 mm x 5,5 mm |
| Net weight | 580g |
| Working environment temperature | 0’N40’C |
| Storage temperature | -10’N 50’C |
| Relative humidity | 20%-90% |
| Product size | 268 mm x26 mm x 188 mm |
- The manufacturer reserves the right to change the information contained in this manual without prior notice.
WASTE MANAGEMENT
The crossed-out trashcan symbol means that waste electrical and electronic, batteries, and packaging must not be placed with other household waste. They must be handed over to a separate waste collection system.
WARRANTY
- Newell products are covered by a 40-month manufacturer’s warranty.
Made in China.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>