JK Audio Voice Path Telephone Handset Audio Tap User Guide
- June 9, 2024
- JK Audio
Table of Contents
JK Audio Voice Path Telephone Handset Audio Tap User Guide
Overview
Introducing Voice Path
Voice Path continuously routes both sides of your conversation to the mic
input of your PC (or Mac) sound card. Simply press in the gray button when you
are ready to play audio recordings back into the phone line. With the button
in, Voice Path will disconnectthe microphone from your handset and send audio
down the phone line and into your receiver. You will hear the transmit audio
as well as the voice from the other end of the call.
Input to Phone
The cable marked accepts a line level signal from your computer sound card to
send down the telephone line. This can be audio streaming from the internet,
CD audio, a conversation previously recorded from the Voice Path, or any other
audio that would normally play through your computer speakers.
Output to PC
The cable marked sends a mic level signal to your computer sound card’s mic
input. This signal will contain a mix of your voice (or other audio sent down
the phone line) and the audio from the other end of the call. This mix ratio
is not adjustable, it is a function of the telephone, not our product. As it
turns out, this is a suitable mix ratio for most applications.
Overview
Voice Path Telephone Handset Audio Tap
Setup
Getting Connected
Voice Path connects between the handset and the base of your telephone. Follow
these simple steps:
- Unplug the modular handset cord from your telephone base.
- Using the black handset jumper cord that we have provided, connect the jack of Voice Path to the handset jack on the base of your telephone.
- Plug your handset cord, and handset (or headset), into the jack on Voice Path.
- Connect the cable to the mic input on your computer. 5. Connect the cable to the line output on your computer.
Note: Not for use with telephones that have a keypad in the handset.
Operation
Handset Type Switch
The three position switch on the back of Voice Path selects the type of
microphone that is in the handset of your telephone. When you push in the
Record/Play button, Voice Path replaces the handset microphone signal with a
circuit that must match the characteristics of the handset microphone.
Note: Not all telephones are built alike so we cannot guarantee Voice Path will work with every handset design available. We designed the interface to work with most popular designs.
The Handset Type switch can cover the main three microphone types, but keep in mind that there is no industry standard for microphone types or characteristics and therefore we cannot guarantee a perfect match with every telephone. There is no way to tell which type of mic is in your telephone handset. Simply use the position that sounds best without clipping or signal break-up.
A Electret
B Dynamic
C Carbon
Record/Playback Button
The Record/Playback button selects which signal will be sent down the phone
line; the handset microphone, or the cable.
Recording (Position: Out)
- Make certain the Record / Playback button is in the Out position.
- Then start your recording from your software controls.
- The level of the audio sent into your PC can be adjusted from the back of the unit. Place a small screwdriver into the hole marked
To PC Vol. and turn…
Clockwise: Raise Level
Counter-clockwise: Lower Level
This is a passive unit so the signal can not be raised above mic level.
Play (Position: In)
- Make certain the Record/Playback button is in the In position.
- Start the audio playing on your computer.
- Select the appropriate position on the Handset Type switch.
- The audio playing on your computer will be sent down the telephone line to the other end of the call and to the handset earpiece. The handset microphone is disconnected while Voice Path is in the Play position.
FAQs
The headset I am currently using goes through an amplifier before it connects to my telephone. Will the Voice Path work with this headset?
If the amplifier was designed to connect to any telephone’s handset jack then yes. The Voice Path goes between the amplifier and your telephone base. Simply connect the Voice Path modular jack marked to the handset jack of your telephone base and the Voice Path modular jack marked to the amplifier’s modular jack (that usually connects to the telephone handset jack). Leave your headset connected to the amplifier as usual and it should work fine.
Can I still use my computer speakers when the Voice Path is connected?
Yes. You will need a Y-adapter for your sound card line output. This adapter should have 1 stereo mini plug (male) that splits into 2 stereomini jacks (female). Plug the adapter into your sound card line output, plug your computer speakers into one of the adapter’s mini jacks and the Voice Path “input from PC” cable into the other.
When playing back the recorded conversation, I can only hear the Caller’s voice. Why can’t I hear my voice?
Voice Path relies on the audio provided by your telephone’s handset jack. Some telephones do not provide audio from both sides of your conversation, only the far side. If your telephone is designed to only provide caller audio in the handset, you will have to try another telephone.
I have a Voice Path connected between my telephone and computer. I can record conversations to my sound card but cannot send audio (from the PC) down the phone line. What should I do?
- Connect the cable marked on Voice Path to the line output or speaker output of your sound card. This is usually where you connect your PC speakers.
- Make sure your computer volume (software) is at an acceptable level.
- Complete a call to a friend who can listen and evaluate the signal. You will be able to hear their comments during the call.
- Set the gray pushbutton on the Voice Path to the in position. This disables the handset microphone and enables the audio input.
- Play an audio file on your computer. It should be long enough to complete this test (or select “loop playback” from your software).
- Next, switch between the 3 handset type positions on the Handset Type switch on the back of the Voice Path. Select the position with the best audio quality (best does not necessarily mean loudest!). Then adjust the sound card output level using your software.
Block Diagram
Specifications
Line Input
3.5 mm TRS (Left Channel Only) (48″ cable)
10k ohms / 250 mV nominal
Output
3.5 mm TS (Mono) (48″ cable)
2800 ohms 100 mV max
Misc.
Isolation: 1500 VAC
Handset Jack: RJ-22
Handset Type: Electret, Dynamic, Carbon
Size: 3″ x 1″ x 2″ (7.6 x 2.5 x 5.1 cm)
Weight: 9 oz
FCC Registration
Your new JK Audio product has been registered with the Federal Communications Commission (FCC). This product complies with the standards in Part 68 of the FCC rules
-
Connection And Use With The Nationwide Telephone Network The FCC requires that you connect this telephone equipment to the national telephone network through a USOC RJ-11C modular telephone jack. This equipment may not be used with Party Line Service or Coin Telephone Lines. This equipment is hearing aid compatible.
-
Information For The Telephone Company Upon request from your local telephone company, you are required to provide the following information:
a. The “line” to which you will connect the telephone equipment (that is, your telephone number), and
b. The telephone equipment’s FCC registration number. This can be found on the bottom of your telephone equipment. -
Repair Instructions
If it is determined that your telephone equipment is malfunctioning, the FCC requires that it not be used and that it be unplugged from the modular outlet until the problem has been corrected. Repairs to this telephone equipment can only be made by the manufacturer or its authorized agents or by others who may be authorized by the FCC. For repair procedures, follow the instructions outlined under the warranty section of the manual. -
Rights Of The Telephone Company
If telephone equipment is causing harm to the network, the telephone company may temporarily discontinue your telephone service. If possible, they’ll notify you before they interrupt service. If advanced notice isn’t practical, you’ll be notified as soon as possible. You’ll be given the opportunity to correct the problem, and you’ll be informed of your right to file a complaint with the FCC. Your telephone company may make changes in its facilities, equipment, operations or procedures that could affect the proper functioning of your JK Audio product. If such changes are planned, you’ll be notified by your telephone company.
Voice Path™
Telephone Handset Audio Tap
User Guide Version 4/16/22
JK Audio, Inc. 1311 E 6th St. Sandwich, IL 60548 United States
Telephone: 815.786.2929
Toll Free: 1.800.jkaudio
Fax: 815.786.8502
www.jkaudio.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>