Simply Retrofits DL4-023-8WH83 CCT Adjustable 4 Inch Multi Directional Gimbal Installation Guide

June 12, 2024
Simply Retrofits

Simply-Retrofits-logo

Simply Retrofits DL4-023-8WH83 CCT Adjustable 4 Inch Multi Directional

Gimbal

Important: Read all instructions in order to ensure safety and proper installation.

Parts List

Simply-Retrofits-DL-023-8WH-CCT-Adjustable-4-Inch-Multi-Directional-Gimbal-
fig-1

  1. Junction box
  2. Connector
  3. Light panel
  4. Spring clips

MAINTENANCE

  • Do not modify this fixture. Any modifications may render the product unsafe and void warranty.
  • This product is suitable for damp locations.

INSTALLATION GUIDE

WARNING: Risk of electric shock. Turn OFF power before installation or removal.

  1. Turn power off from the electrical panel.
  2. Cut a hole in the ceiling for desired location (fig. 1).
  3. Open the junction box cover and remove the appropriate knockout(s) on the side panel (fig. 2).
  4. Insert the electrical supply cable through the knockout and secure with a cable connector (sold separately). (fig. 3, 4 and 5)
  5. Wire the driver/junction box (fig. 6).
  6. Connect the lamp connectors and lock it (fig 7)
  7. Push spring-loaded clips on the panel light upwards and insert into the mounting hole. Release the clips and fixture will be pulled flush to the ceiling. (fig. 8).
  8. Turn on power to make sure panel light is well installed.
  9. Select suitable CCT by the switch

INSTALLATION

Simply-Retrofits-DL-023-8WH-CCT-Adjustable-4-Inch-Multi-Directional-Gimbal-
fig-2

CAUTION: CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR.

www.simplyretrofits.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Simply Retrofits User Manuals

Related Manuals