iottie Velox Magnetic Flush Mount Car Phone Holder User Guide
- June 12, 2024
- iOttie
Table of Contents
Quick Start Guide
Velox™ Magnetic Flush Mount
Product Installation
- Choose a mounting location and wipe the surface clean.
- Peel off the film on the base of the flush mount and firmly press onto the desired installation location for 30 seconds. “If your vehicle has a leather dashboard, we recommend mounting on the windshield to avoid damaging your dash.
Only compatible with Massif iPhone series and cases.
We’d love to hear from you!
Don’t forget to leave a review.
Follow @iottie for the latest news and updates!
Need help? Reach out to us directly by emailing:
cs@iottie.com
Please visit our website for more information.
www.iottie.com
https://www.iottie.com/manual/veloxflushmount
Seen QR code for full manual www.iottie.com/manual/veloxflushmount
Velox™
Magnetic Mini Flush Mount
User Manual
For optimal mounting, please follow the detailed instructions within this
manual when using the Velox Magnetic Mini Flush Mount.
At a Glance
Device Compatibility
Velox products are designed for use with MagSafe compatible iPhones and cases.
Compatible devices include the iPhone 13, iPhone 13 mini, iPhone 13 Pro,
iPhone 13 Pro Max, and the iPhone 12 series.
- biotite is not liable for possible damages due to product misuse.
Product Specifications
| Item | Specification |
|---|---|
| Length | 2.28″ |
| Width | 2.3″ |
| Height | 2.38″ |
| Weight | 1.57 oz |
Installing the Velox Flush Mount
Attaching the Flush Mount
-
Choose a flat area on the vehicle’s dashboard and wipe any dust or debris from the surface.
NOTE: For vehicles with leather dashboards, we recommend mounting on the windshield. -
Peel off the film on the base of the flush mount.
-
Press the flush mount evenly onto the desired installation location for 30 seconds.
Wait 20 minutes before mounting your phone.
- The adhesive base features a semi-permanent tape. Once the mount is removed, it cannot be re-mounted.
- When mounting, it is recommended that the surface and product be above 65°F.
- When removing the flush mount, please use caution. We recommend removing slowly from the edge to avoid damage.
Mounting Your iPhone
Simply tap your MagSafe iPhone against the mounting face and the magnets will
hold it in place. You are now ready to start driving.
The Velox Magnetic Mini Flush Mount is backed by a 2 year warranty.
MagSafe Compatible
Only compatible with MagSafe iPhone series and cases.
Documents / Resources
|
iottie Velox Magnetic Flush Mount Car Phone
Holder
[pdf] User Guide
606MGIO104, Velox Magnetic Flush Mount Car Phone Holder, Magnetic Flush Mount
Car Phone Holder, Flush Mount Car Phone Holder, Car Phone Holder, Phone Holder
---|---