hOMACER Frame Color Pine Wood Barn Door Instruction Manual
- June 12, 2024
- HOMACER
Table of Contents
Color Pine Wood Barn Door – Frame
Instruction Manual
SAFETY PRECAUTIONS
!CAUTION!
- Power tools can cause serious damage if not professionally used. Safety gear must be worn before installation to prevent unexpected Injuries.
- Pick an area free of hazardous condition before you start on the project. Please use tools and power tools responsibly any loss of control and accident deaths may occur due to abuse of tools.
- Big objects required in this project are needed to be carefully and responsibly moved. Be sure to wear safety gloves and shoes to prevent any serious injury.
- Be extremely careful to not put any parts of your body against a moving part of the hardware. This may cause bruising, punctures, and other results of injuries when for example when fingers are caught in the closing area of the doors.
- Precautions should be taken when opening or closing the door(s). Handles should be used when attempting to slide the door(s). Always keep you and children aware and safe from any unexpected situations.
- Any extreme uncontrolled pressure opening or closing the door(s) can damage the hardware gradually. Use handle(s) to open and close the door(s) with care at all times.
HARDWARE INCLUDED
Please check that you have the correct quantity of hardware before
installation. Different door sizes comes with different quantity of hardware.
Checklist for items you should have for each door size.
Size| A| B1| B2| B3| C1| C2| C3|
E| F| G
---|---|---|---|---|---|---|---|---|---|---
20in| 2| 1| 1| 1| 2| 2| 2| 10| 10| 64
22in| 2| 1| 1| 1| 2| 2| 2| 10| 10| 64
24in| 2| 1| 1| 1| 2| 4| 2| 10| 10| 64
26in| 2| 1| 1| 1| 2| 4| 2| 10| 10| 64
28in| 2| 1| 1| 1| 2| 6| 2| 10| 10| 64
30in| 2| 1| 1| 1| 2| 6| 2| 10| 10| 64
32in| 2| 1| 1| 1| 2| 6| 2| 10| 10| 64
34in| 2| 1| 1| 1| 2| 8| 2| 10| 10| 64
36in| 2| 1| 1| 1| 2| 8| 2| 10| 10| 64
38in| 2| 1| 1| 1| 2| 10| 2| 10| 10| 64
40in| 2| 1| 1| 1| 2| 12| 2| 10| 10| 64
42in| 2| 1| 1| 1| 2| 12| 2| 10| 10| 64
44in| 2| 1| 1| 1| 2| 12| 2| 10| 10| 64
46in| 2| 1| 1| 1| 2| 14| 2| 10| 10| 64
48in| 2| 1| 1| 1| 2| 14| 2| 10| 10| 64
54in| 2| 1| 1| 1| 2| 16| 2| 10| 10| 64
60in| 2| 1| 1| 1| 2| 22| 2| 10| 10| 64
Please check list below for the panels you need to build your door design.
| Door Design Dl | D1 | D2 | H1 | H2 |
|---|---|---|---|---|
| H | 0 | 0 | 0 | 0 |
| Single X | 1 | 1 | 2 | 2 |
| Left Arrow | 2 | 2 | 4 | 4 |
| Right Arrow | 2 | 2 | 0 | 0 |
INSTRUCTIONS
WARNING
If you purchased any of our Sliding Barn Door Hardware Kit to accommodate with
this door please do not install the long bolts on the first hole. This will
interfere with the installation of the rollers. You may cover up the hole with
the wooden dowels given only. Having one screw installed for the top
horizontal slab will not interfere with the stability of the door.
WARNING
If you purchased any of our Sliding Barn Door Hardware Kit to accommodate with
this door please do not install the long bolts on the first hole. This will
interfere with the installation of the rollers. You may cover up the hole with
the wooden dowels given only. Having one screw installed for the top
horizontal slab will not interfere with the stability of the door.
If you order the H design, your installation is complete!
NOTICE
But if you order other designs besides H, please continue to page 5.
Before Installing the decorative panels make sure to differentiate the top and
the bottom of the door(s). That way you can place the panels, and position it
in the desired design.
YOUR INSTALLATION IS COMPLETE!
WARNING!
- Power tools can cause serious damage if not professionally used. Safety gear must be worn before installation to prevent unexpected injuries.
- Pick an area free of hazardous condition before you start on the project. Please use tools and power tools responsibly, any loss of control and accident deaths may occur due to abuse of tools.
- Please make sure all hardware secured on to the door is sufficiently tight. Doors with loose hardware may result in unexpected serious injuries. To avoid any problems, be sure hardware is secure before door is put on the track.
- NI hardware provided is for safety reasons. Anti-Jump systems are to prevent doors from falling off the track while in use Please follow each instruction carefully. Track must be installed on studs in order to keep the track and doors secure from serious problems. All safety hardware and instructions included in this project must be used and followed specifically to prevent any unforeseen serious problems.
!CAUTION!
- Big objects required in this project are needed to be carefully and responsibly moved. Be sure to wear safety gloves and shoes to prevent any serious injury.
- Be extremely careful to not put any parts of your body against a moving part of the hardware. This may cause bruising, punctures, and other results of injuries when for example when fingers are caught in the closing area of the doors.
- Precautions should be taken when opening or closing the door(s). Handles should be used when attempting to slide the door(s). Always keep you and children aware and safe from any unexpected situations.
- Any extreme uncontrolled pressure opening or dosing the door(s) can damage the hardware gradually. Use handle(s) to open and close the door(s) with care at all times.
HARDWARE INCLUDED
Different track length comes with different hardware quantity. Please be sure
to check the hardware you should have before installation.
HARDWARE CHECKLIST
Track Measurement| Hanger/Roller Set for Single Door Kit|
Hanger/Roller Set for Double Door Kit| Flat Track| Spacer Set|
Junction Plate
---|---|---|---|---|---
4FT| 1| 2| 1| 3| 0
4.5FT| 1| 2| 1| 3| 0
5FT| 1| 2| 1| 4| 0
5.5FT| 1| 2| 1| 4| 0
6FT| 1| 2| 1| 5| 0
6.6FT| 1| 2| 1| 5| 0
7FT| 1| 2| 1| 5| 0
7.SFT| 1| 2| 1| 6| 0
8FT| 1| 2| 1| 6| 0
9FT| 1| 2| 2| 6| 1
10FT| 1| 2| 2| 8| 1
11FT| 1| 2| 2| 8| 1
12FT| 1| 2| 2| 10| 1
13FT| 1| 2| 2| 10| 1
14FT| 1| 2| 2| 10| 1
15FT| 1| 2| 2| 12| 1
16FT| 1| 2| 2| 12| 1
18FT| 1| 2| 3| 15| 2
20FT| 1| 2| 3| 15| 2
TYPE OF HANGERS
Please follow the measurement stated below, measuring from the top of the door to the center of the first hole.
INSTRUCTIONS
Route a slot that is 1/4″ wide and 13/16″ deep at the bottom of the door for all three doors. This groove will be used with the floor guide provided. If you do not want to open a slot underneath your doors, we do sell other types of floor guides that does not need the groove. You can type “floor guides” at the top left search bar of our website to see all the types of floor guide we have.
Step-5
Please follow the diagram above on how the hex bolt, washers and nut should be
installed on the the door and hangers. Do not install them any other way since
it may interfere with the function of the sliding system.
Drill the holes for the hanger according to the dimension given in the
picture. The distance between the top edge of the door and the center of the
upper hole is 1 5/8″. The distance between the side edge of the door and the
hanger is up to your choice. It should be at least be a minimum of 1″ away
from the edge to prevent any damage to your doors. Next, install the hex bolts
and acorn nuts as shown in the picture.
Notice: If you have other design hanger, please look up the dimension on
Page 3.
Install the anti-jump pads on top of the door as shown on the picture, it is suggested to mount them right below the track.
To mount your doors onto the track, you will have to lift your door at a slight angle and rest both wheel grooves onto the top of the track carefully.
Usually floor guides are installed corner of the opening for standard single
and double door hardware but we recommend to install the regular floor guide
in your own location preference Depending on how you want your door(s) to
slide. After the door is hung on to the track you will be able to locate where
you want the floor guide to be installed according to your decision of
sliding.
Notice: If you have two doors you can repeat from step 4 to step 8 again
for the second door installation.
YOUR INSTALLATION IS COMPLETE!
SLIDING HARDWARE / BARN DOORS
High Quality – Exquisite Design – Outstanding Services
ABOUT US
At Homacer, our goal is to provide the finest sliding barn door hardware
products and services for our valued customers.
We keep polishing our products to make their quality better, prices lower and
installation easier.
We make it possible for you to get everything you need from us when you think
about installing sliding bam doors.
CONTACT US
Customer Services
Office #: 1(770) 864-5437
Website: www.homacer.com
Email us: [email protected]
Bulk Order Program
To learn more about bulk order
program you may contact us at
Office #: 1(770)-559-5849
Website: www.homacer.com/pages/membership-
program
Email us: [email protected]
LOCATION
1885 Beaver Ridge Cir, Ste A
Norcross, GA 30071