AUDIBAX Iowa Pix 300 Wash Moving Head LED Stage Light User Manual

AUDIBAX Iowa Pix 300 Wash Moving Head LED Stage Light

Product Information

• Product Name: Iowa Pix 300 PRO
• Manufacturer: Audibax
• Website: www.audibax.com
• Language: English The Iowa Pix 300 PRO is a lighting fixture that uses DMX technology.

It offers various features such as stand alone mode, zoom, color wheel, master/slave mode, strobe, pan & tilt. The product is designed with attention to detail and undergoes quality control to meet European standards.

Product Usage Instructions

Safety Instructions

• Ensure that the power outlet matches the specifications of the equipment. If the equipment has a voltage selector, only connect it to the power outlet if the values ​​match.
• To prevent damage and overheating, qualified personnel should regularly clean and service the equipment depending on ambient conditions like dust, nicotine, and fog.

General Information

• The product should be serviced by qualified personnel in case of maintenance or repairs. Do not attempt to remove the cover or back as there are no user-serviceable parts inside.
• The warning triangle with a lightning symbol indicates the presence of dangerous uninsulated voltage inside the unit. Disconnect all power sources before servicing.

DMX Data Sheet

• The Iowa Pix 300 PRO supports 15 channels for control.
• The following channels are available: CH 1, CH 2, CH 3, CH 4, CH 5, CH 6, CH 7, CH 8, CH 9, CH 10, CH 11, CH 12, CH 13, CH 14, CH 15.
• Use these channels to control the color change of the LEDs and the speed of the color change.
• The color change channels are R (red), G (green), B (blue), W (white).
• The zoom feature allows you to adjust the focus from near to far.
• The brightness can be adjusted from dark to bright. For more information and further assistance, please visit the Audibax website at www.audibax.com .

DATA SHEET

• Brand: Audibax Pro
• Product Name: Audibax Pro Iowa Pix 300
• ID: 10242474
• EAN: 7.42724E+12
• Category: Lighting
• Mobile heads
• Lamp Type: Led
• Power: 250W
• Rotating gobos: No
• Number of Gobos: 0
• Fixed Gobos: No
• Battery Operation: No
• Exterior Use: No
• Color Mix: RGBW
• Motorized Zoom: Yes
• Housing Color: Black
• Connections: 3-pin XLR
• Motorized Focus: No
• Prism: No
• Iris: No
• Height: 38 cm
• Width: 16.5 cm
• Depth: 25 cm
• eights: 8Kg
• Number of LEDs: 19
• Power per LED: 15W
• Effect: No
• Wireless Control: No
• IP protection: IP20
• DMX control: Yes
• Opening Angle: 7 – 55º
• Number of Color Wheels: 0

WELCOME TO AUDIBAX

Thank you very much for choosing Audibax. We hope you enjoy your new product.
It has been developed and designed paying attention to the smallest details, with quality control with European standards supervised by our great team of professional technicians, who work every day to offer our customers the best quality. We make sure that every Audibax product is built to last long. All our references are made with long lasting materials and our specialists are dedicated to constantly doing quality controls to guarantee the best result. Please read carefully this manual in order to use your Audibax product in the best way. Do not hesitate to visit our website for further information: www.audibax.com

SAFETY INSTRUCTIONS

GENERAL INFORMATION

• It is important to read and follow the instructions carefully.
• Keep all information and instructions in a secure location.
• Always follow the instructions provided.
• Take note of all safety warnings and never remove them from the equipment.
• Use the equipment only as intended and for its intended purpose.
• Ensure that the stands and/or mounts used are sufficiently stable and compatible for fixed installations. Wall mounts should be properly installed and secured, and the equipment should be installed securely to prevent falls.
• When installing the equipment, be sure to observe the relevant safety regulations in your country.
• Do not install or operate the equipment near sources of heat, such as radiators, heat registers, or ovens, and ensure that it is always cooled sufficiently and cannot overheat.
• Do not place sources of ignition, such as burning candles, on the equipment.
• Keep ventilation slits unobstructed.
• For equipment designed for indoor use only should not be used near water, flammable materials, fluids, or gases. Special outdoor equipment should be used in accordance with the manufacturer’s instructions.
• Ensure that no dripping or splashed water can enter the equipment and do not place containers filled with liquids on the equipment.
• Prevent objects from falling into the equipment.
• Use the equipment only with recommended accessories intended by the manufacturer.
• Do not attempt to open or modify the equipment.
• Check all cables after connecting the equipment to prevent accidents or damage due to tripping hazards.
• During transport, take steps to prevent the equipment from falling and causing damage or injury.
• If the equipment is not functioning properly, fluids or objects have gotten inside, or is otherwise damaged, switch it off immediately and unplug it from the power outlet (if applicable). Only authorized, qualified personnel should repair the equipment.
• Clean the equipment with a dry cloth.
• Comply with all applicable disposal laws and separate plastic and paper/cardboard during packaging disposal.
• Keep plastic bags out of the reach of children.

FOR DEVICES DESIGNED TO BE CONNECTED TO THE MAIN POWER SUPPLY:

• ATTENTION: If your equipment has a power cord with a grounding plug, it must be connected to a wall outlet with a ground connection. Never remove the grounding plug from the power cord.
• If your equipment has been exposed to extreme temperature changes, allow it to reach room temperature before turning it on. Otherwise, moisture and condensation may damage the equipment.
• Before plugging in the equipment, make sure that the voltage and frequency of the power outlet match the specifications of the equipment. If the equipment has a voltage selector, only connect it to the power outlet if the values match. If the power cord or adapter does not fit your outlet, contact an electrician.
• Do not step on the power cord. Make sure it is not pinched at the outlet, adapter, or equipment connection.
• Keep the power cord or adapter within reach and disconnect the equipment from the power supply when not in use or when cleaning it. Always unplug the cord or adapter by pulling the plug or adapter, not the cord. Never touch the cord or adapter with wet hands.
• Avoid frequently turning the equipment on and off, as this can reduce its useful life.
• IMPORTANT: Only replace fuses with those of the same type and rating. If a fuse repeatedly blows, contact an authorized service center.
• To completely disconnect the equipment from the power mains, unplug the power cord or adapter from the outlet.
• If your device has a Volex power connector, the mating Volex connector must be unlocked before it can be removed. Be careful when laying cables, as the equipment can slide or fall if the power cord is pulled.
• Unplug the power cord or adapter before an extended period of disuse or in case of lightning strike risk.
• Only install the equipment when it is disconnected from the power source.
• To prevent damage and overheating, qualified personnel should regularly clean and service the equipment depending on ambient conditions like dust, nicotine, and fog.

If the product contains the following symbols, please, read carefully:

CAUTION

• Risk of Electric Shock.
• Disconnect all power sources before servicing

CAUTION: To reduce the risk of electric shock, do not remove cover (or back). There are no user serviceable parts inside. Maintenance and repairs should be exclusively carried out by qualified service personnel.

Warning

• The warning triangle with lightning symbol indicates dangerous uninsulated voltage inside the unit, which may cause an electrical shock.
• The warning triangle with an exclamation mark indicates important operating and maintenance instructions.

IMPORTANT INFORMATION

WARNING:  IMPORTANT INFORMATION REGARDING LIGHTING PRODUCTS

1. This product is specifically designed for use in event technology and is not intended to be used as household lighting.
2. It is important to avoid looking directly at the light beam, even for a short period of time.
3. Optical instruments, such as magnifiers, should not be used to look directly at the beam.
4. If you are sensitive to strobe effects, it is possible that they could cause an epileptic seizure. If you have epilepsy, it is important to avoid places where strobe lights are being used.

PACKAGE CONTENT

• 1 x Iowa Pix 300
• 1 x product USER MANUAL
• 1 x Power source connected lines
• 1 x signal lines

PRODUCT DESCRIPTION

• Light source: 19*15W RGBW 4-in-1 Osram LED
• Power: 250 W
• Control signal: DMX 512, in sets at the automatic procedure
• Channel: 15/23CH, DMX512 channel control
• Motion: level 540°, vertical 280°, horizontal and vertical uses the electronic replacement function
• Color: 16.7 million kinds of colors changes
• Adjusts the light: 0-100 electron adjusts the light, various colors may alone move also may mix the color tone
• Strobe : 1-25/second high speed strobe, but single color mixes the color strobe
• ZOOM angle: 7 – 55 degree
• DMX512, Auto, Sound, Master-slave
• Voltage: AC110-260V 50/60Hz

PRODUCT ILLUSTRATION

Our product adopt semiconductor to produce radiation, LED as light origin. With advantage of operation quietly, less power waste, high brightness, gaily- colored, astigmatic, high longevity (60-100 thousands hours), non-calorific etc. Our product apply to use 3 kinds light as red, green, blue LED, synthesize turn colors under election, can create effect of auto gradual change/skip change color, frequent blinking. Can accept control by DMX512, real save power, no pollution green lighting tool.

THE INSTALLMENT OF LED MOVING HEAD

Use the four bolts with M8 size by the clip of the LED moving head to install it. Should guarantee the reliability of the install, this way is to prevent the LED moving head occur swings and skids when it’s working. The weight is about 8Kg of each LED moving head, before install, you should confirm the structure whether can support this weight of the LED moving head light. In order to guarantee the security, you also need to install a safety chain in the lamp body side handle.

Warning: Do not use the hand of the LED moving head to up and down or fix.

THE CONNECTION OF CONTROL CORRESPOND WIRE

The connection of controller between the led moving head lamp and respectively led moving head lamp should use the twin core shielded cable, and the diameter of each core at least be 0.3mm. After receives the DMX512 signal, the lamp of nearby the address switch condition will glisten. When it’s do not receive the DMX signal, the lamp will in extinguish condition, but if the signal lamp glisten continuously, the mean is the DMX signal is not be correct.

When installing, uses the DMX signal terminal is much better. It can avoid the digital control signal breached by the electrical noise. Generally speaking, the DMX terminal is Cannon plug coupling, it has a 120 ohm resistances between the 2 feet and 3 feet, it will connected on the last led moving head lamp’s digital plug of the led moving head lamp chain.

Connecting DMX512 digital signal, Please using high quality screen line to connect it, for fear interfering.

THE CONNECTION OF POWER CABLE

• Use the provided plug to connect the main power to the projector paying attention to the voltage and frequency marked on the panel of the projector.
• It is recommended that each projector be supplied separately so that they may be individually switched on and off.

IMPORTANT

• It is essential that each projector is correctly earthed and that electrical installation conforms to all relevant standards. Power consumption of this projector is 200VA.
• The connection of Power cable between the led moving head lamp and respectively led moving head lamp should use the three core shielded cable, Power cable joint (at most 4pcs) in each other, this is the Connector picture as below:

Important Notice: In order to avoid overloading the power supply, the power cable can only supply power for at most 4 light.

Clean maintenance

In order to guarantee the LED moving head lamp can work better, you should keep the lamp in clean state. Suggests clean the lamp body and fan in each 15 days. For the PVS board, you need clean it on time. When you cleaning the PVC piece, please do not use any soluble cleanser,

DIFFICULT PROCESSING

Although shines, but the LED moving head lamp can not accept the instruction of the controller.| Check the digital start address (sees

09th) and also check the connection situation of the communication control line the (to see

03rd).

LED moving

intermittently.

| head| lamp| only| can| work| Inspect the power supply and voltage is

whether normal.

Do not receive the DMX512 signal| Whether the signal lines do contact

good or broken

The light beam appears gloomily.| Inspect the optics part is whether clean.

FUNCTIONAL DESCRIPTION

Controller can control Moving head light’s three axes (PAN axis, TITL axis and Zoom axis), The light have RGBW 4IN1 Multi-Chip LED Lamp, and 3IN1 Tricolor RGB LED Moving Head, and 3color and 4 color, it have DMX mode (can be set DMX address), self-propelled mode (can be set up master-slave), Sound mode (can be set master / slave), The mode selection can be set by the panel or DMX 512 controller (this must be set to DMX mode); The light also have strobe / random frequency flash / strobe out fast and slow / slow forward faster strobe mode, the color jump / gradients

FUNCTIONAL SETTING

Fast operation settings

Controller can quickly set the light’s mode, the main interface, followed by “ESC” key to select DMX mode, Auto mode or sound-activated mode,

• In DMX mode: Press “UP” “DOWN” to optional DMX address;
• In the self-propelled mode: Press “UP” “DOWN” to choose master or slave;
• In the sound mode: Press “UP” “DOWN” to choose master or slave

PANEL OPERATION

LCD Display

• A. Menu
• B. Up
• C. Down
• D. Enter

Operating instructions: Press A will show different function, Press B or C for changing function, Press D for enter.

Detailed function instruction:

1. [DMX Address Set] for setting DMX address for light
2. [Work Mode Set] For setting different work mode, 3 modes workable ,they are DMX512,AUTO,SOUND Activated.. When entering AUTO or SOUND, Light will send DMX signals automatically.
3. [Invert PAN Set]
4. [Invert TILT Set]
5. [Channel Set] For choosing different Channel Mode, two kinds available,23 channels or 15 Channels.
6. [Restore Factory Settings]
7. [Reset] For resetting light in AUTO work mode, Press button up or down for choosing language in English or in Chinese.

DISPOSAL

Packaging

1. The packaging can be recycled using standard disposal methods and reintroduced into the reusable material cycle.
2. Please follow the laws and regulations regarding disposal and recycling of packaging in your country.

Device

1. This device is subject to the Waste Electrical and Electronic Equipment (WEEE) Directive of the European Union. Used appliances should not be disposed of with household waste. Used device must be disposed of through an approved disposal company or a municipal disposal facility. Please comply with the applicable regulations in your country.
2. Please follow all the disposal laws and regulations in your country.
3. As a customer, you can obtain information on environmentally-friendly disposal options from the product seller or the appropriate regional authorities.

DMX channel function

23 Channels

CH 8

|

Strobe

| no function| 0—-15
strobe from slow to fast| 16—-255
CH 9| LEDS color changing| no function| 0—-15
LEDS color changing| 16—-255
CH 10| LEDS color changing speed| from fast to slow| 0—-255
CH 11| R1| from dark to bright| 0—-255
CH 12| G1| from dark to bright| 0—-255
CH 13| B1| from dark to bright| 0—-255
CH 14| W1| from dark to bright| 0—-255
CH 15| R2| from dark to bright| 0—-255
CH 16| G2| from dark to bright| 0—-255
CH 17| B2| from dark to bright| 0—-255
CH 18| W2| from dark to bright| 0—-255
CH 19| R3| from dark to bright| 0—-255
CH 20| G3| from dark to bright| 0—-255
CH 21| B3| from dark to bright| 0—-255
CH 22| W3| from dark to bright| 0—-255
CH 23| Reset| no function| 0—-127
reset| 128—-255

15 Channels

• Powered on LED Moving light, connect it to the DMX controller, after receiving the DMX signal, the signal mark X disappeared, then light is under DMX controller’s control.
• Under DMX Mode, connecting multiple lights together, but disconnecting with DMX controller, all lights can work in the same step. When connected the first one to controller, the whole group can move in the same step under DMX controller’s control.

www.audibax.com

References

• Home - Audibax

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>