AUDIBAX Iowa 360 Zoom 4-in-1 LEDs Wash Moving Head User Manual

: June 12, 2024
: AUDIBAX

Table of Contents

AUDIBAX Iowa 360 Zoom 4-in-1 LEDs Wash Moving Head
Product Usage Instructions:
SAFETY INSTRUCTIONS
- GENERAL INFORMATION
IMPORTANT INFORMATION
PACKAGE CONTENT
PRODUCT DESCRIPTION
INSTALLATION OF CLAMPS
- INTRODUCTION TO THE FUNCTION
MENU OPERATION
DISPOSAL
DATA SHEET
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AUDIBAX Iowa 360 Zoom 4-in-1 LEDs Wash Moving Head

Product Information:

Product Name:

IOWA 360 ZOOM PRO

Manufacturer:
Audibax

Product Features:

DMX Technology
Stand Alone Mode
Zoom
Colour Wheel
Master/Slave
Strobe
Pan & Tilt

Product Description

The IOWA 360 ZOOM PRO is a professional lighting fixture manufactured by Audibax. It is equipped with DMX technology, allowing for precise control over its various features. The stand-alone mode enables the fixture to operate independently without the need for external control. The zoom function allows for adjustable beam angles, providing versatility in lighting setups. The colour wheel feature offers a wide range of colors for creative lighting effects. The master/slave mode allows multiple fixtures to be synchronized and controlled together. The strobe function creates rapid flashes of light for dynamic effects. The pan and tilt feature enables the fixture to move and position the light beam in different directions. With its advanced features and high-quality construction, the IOWA 360 ZOOM PRO is suitable for professional lighting applications.

Product Usage Instructions:

Safety Instructions:

Ensure that the power outlet matches the specifications of the equipment.
If the equipment has a voltage selector, only connect it to the power outlet if the values match.
Qualified personnel should regularly clean and service the equipment to prevent damage and overheating.
Do not remove the cover or back of the equipment, as there are no user-serviceable parts inside.
Maintenance and repairs should be exclusively carried out by qualified service personnel.

General Information:

The IOWA 360 ZOOM PRO is designed and manufactured to meet European quality standards. It is built with durable materials to ensure long-lasting performance. Audibax’s team of professional technicians supervise the quality control process to guarantee the best results. For further information and support, visit the Audibax website: www.audibax.com

DMX Table:

Channel	Function	Value Range
1	X (pan)	000-255
2	Y (tilt)	000-255
3	XY speed	000-255
4	General dimmer	000-255
5-8	Red 1st group	000-255
9-12	Green 1st group	000-255
13-15	Blue 1st group	000-255
16	White 1st group	000-249 (no effect), 250-255 (reset)

Package Content:

1 x Iowa 360 Zoom
1 x Omega
1 x User’s manual

WELCOME TO AUDIBAX

Thank you very much for choosing Audibax. We hope you enjoy your new product.
It has been developed and designed paying attention to the smallest details, with quality control with European standards supervised by our great team of professional technicians, who work every day to offer our customers the best quality.
We make sure that every Audibax product is built to last long. All our references are made with long lasting materials and our specialists are dedicated to constantly doing quality controls to guarantee the best result.
Please read carefully this manual in order to use your Audibax product in the best way.
Do not hesitate to visit our website for further information: www.audibax.com

SAFETY INSTRUCTIONS

GENERAL INFORMATION

It is important to read and follow the instructions carefully.
Keep all information and instructions in a secure location.
Always follow the instructions provided.
Take note of all safety warnings and never remove them from the equipment.
Use the equipment only as intended and for its intended purpose.
Ensure that the stands and/or mounts used are sufﬁciently stable and compatible for ﬁxed installations. Wall mounts should be properly installed and secured, and the equipment should be installed securely to prevent falls.
When installing the equipment, be sure to observe the relevant safety regulations in your country.
Do not install or operate the equipment near sources of heat, such as radiators, heat registers, or ovens, and ensure that it is always cooled sufﬁciently and cannot overheat.
Do not place sources of ignition, such as burning candles, on the equipment.
Keep ventilation slits unobstructed.
For equipment designed for indoor use only should not be used near water, ﬂammable materials, ﬂuids, or gases. Special outdoor equipment should be used in accordance with the manufacturer’s instructions.
Ensure that no dripping or splashed water can enter the equipment and do not place containers ﬁlled with liquids on the equipment.
Prevent objects from falling into the equipment.
Use the equipment only with recommended accessories intended by the manufacturer.
Do not attempt to open or modify the equipment.
Check all cables after connecting the equipment to prevent accidents or damage due to tripping hazards.
During transport, take steps to prevent the equipment from falling and causing damage or injury.
If the equipment is not functioning properly, ﬂuids or objects have gotten inside, or is otherwise damaged, switch it off immediately and unplug it from the power outlet (if applicable). Only authorized, qualiﬁed personnel should repair the equipment.
Clean the equipment with a dry cloth.
Comply with all applicable disposal laws and separate plastic and paper/cardboard during packaging disposal.
Keep plastic bags out of the reach of children.

FOR DEVICES DESIGNED TO BE CONNECTED TO THE MAIN POWER SUPPLY:

ATTENTION: If your equipment has a power cord with a grounding plug, it must be connected to a wall outlet with a ground connection. Never remove the grounding plug from the power cord.
If your equipment has been exposed to extreme temperature changes, allow it to reach room temperature before turning it on. Otherwise, moisture and condensation may damage the equipment.
Before plugging in the equipment, make sure that the voltage and frequency of the power outlet match the speciﬁcations of the equipment. If the equipment has a voltage selector, only connect it to the power outlet if the values match. If the power cord or adapter does not ﬁt your outlet, contact an electrician.
Do not step on the power cord. Make sure it is not pinched at the outlet, adapter, or equipment connection.
Keep the power cord or adapter within reach and disconnect the equipment from the power supply when not in use or when cleaning it. Always unplug the cord or adapter by pulling the plug or adapter, not the cord. Never touch the cord or adapter with wet hands.
Avoid frequently turning the equipment on and off, as this can reduce its useful life.
IMPORTANT: Only replace fuses with those of the same type and rating. If a fuse repeatedly blows, contact an authorized service center.
To completely disconnect the equipment from the power mains, unplug the power cord or adapter from the outlet.
If your device has a Volex power connector, the mating Volex connector must be unlocked before it can be removed. Be careful when laying cables, as the equipment can slide or fall if the power cord is pulled.
Unplug the power cord or adapter before an extended period of disuse or in case of lightning strike risk.
Only install the equipment when it is disconnected from the power source.
To prevent damage and overheating, qualiﬁed personnel should regularly clean and service the equipment depending on ambient conditions like dust, nicotine, and fog.
If the product contains the following symbols, please, read carefully:

CAUTION: T o reduce the risk of electric shock, do not remove cover (or back). There are no user serviceable parts inside. Maintenance and repairs should be exclusively carried out by qualiﬁed service personnel.

The warning triangle with lightning symbol indicates dangerous uninsulated voltage inside the unit, which may cause an electrical shock.

The warning triangle with exclamation mark indicates important operating and maintenance instructions.

IMPORTANT INFORMATION

WARNING! IMPORTANT INFORMATION REGARDING LIGHTING PRODUCTS

This product is speciﬁcally designed for use in event technology and is not intended to be used as household lighting.
It is important to avoid looking directly at the light beam, even for a short period of time.
Optical instruments, such as magniﬁers, should not be used to look directly at the beam.
If you are sensitive to strobe effects, it is possible that they could cause an epileptic seizure. If you have epilepsy, it is important to avoid places where strobe lights are being used.

PACKAGE CONTENT

1 x Iowa 360 Zoom
1 x Omega
1 x User’s manual

PRODUCT DESCRIPTION

Power supply: AC100V-240V
Frequency: 50Hz-60Hz
Total power: 450W
Fuse: 7A
Project power: 320W
Color temperature: 8500K
Average life: 2000h
Control signal: DMX512 international standard
Appearance: high temperature resistant plastic + cast alloy material
Project body color: Black
Degree of protection: IP20
Net weight 11 kg

INSTALLATION OF CLAMPS

Please refer to the following picture

AUDIBAX-Iowa-360-Zoom-4-in-1-LEDs-Wash-Moving-Head-3

Omega-bracket
Clamp
Safety cable
Safety lock

Pass one screw through each of the nuts. Insert the quick release grips of the ﬁrst omega holders into the respective holes on the bottom of the device.
Tighten the quick release, make sure the grips are all the way to the right. Install the second omega bracket. Pull the anchor cable through the holes in the bottom of the base and through the trussing or a secure ﬁxing bracket. Insert the end of the carbine and ﬁx the security screw.

INTRODUCTION TO THE FUNCTION

International standard control signal: DMX512
Number of channels: 15ch
Number of motors: 3 silent motors in total
650000 color touch TFT LCD interface, easy to operate, beautiful interface, the interface can be reversed 180 degrees.
X-axis horizontal rotation 540˜, Y-axis vertical rotation 270˜, with automatic correction positioning
X, Y axis operation micro adjustable, software with correction positioning function, high precision!
Dimming: 0-100% linear adjustment
Strobe: strobe speed (1-30 times/s), full linear dimming and variable strobe speed
Focus: using optical combination, the effect is much better than the usual dyeing project, it can project a high-deﬁnition effect
Intelligent overheat protection
Intelligent dimming control (prolong the life of the project)

Conﬁguration interface:
There are four ﬁrst-class menus including system settings, operation mode, display settings, and factory settings. The operation is simple and the reaction speed is fast. Menu description
System settings

Conﬁrm the change to address 002 using the conﬁrmation key. Press up and down key to select DMX address, then conﬁrm and return to exit.
When the encoder is closed, conﬁrm the modiﬁcation through conﬁrm key, and then select close/open from up and down, conﬁrm again and return to exit.
X reverse close: conﬁrm the modiﬁcation with the conﬁrm key, then select close/open up and down, conﬁrm again and return to exit.
And reverse close, conﬁrm the modiﬁcation through conﬁrm key, then select close/open up and down, conﬁrm again and return to exit.
Mode of operation
The operation mode is conﬁrmed by the conﬁrmation key, and the operation mode is selected by the up and down keys, and then conﬁrmed to exit again. 15CH selection
Explicit setting Language select English, conﬁrm the modiﬁcation through the conﬁrm key, select the language with the up and down keys, conﬁrm again, return to exit.
The reverse screen setting is closed. Conﬁrm the modiﬁcation via the conﬁrmation key, select open with the up and down keys, conﬁrm again and return to exit.
Factory setting (password 138)

Calibration X calibration 128 conﬁrms the modiﬁcation through the conﬁrmation key, selects the appropriate channel value up and down, reconﬁrm and exits again Y calibration 128 conﬁrms the modiﬁcation through the conﬁrmation key, selects the appropriate channel value up and down, reconﬁrm and exit again Focus 128 conﬁrms the modiﬁcation through the conﬁrmation key, selects the appropriate channel value up and down, conﬁrms again and exits Red 220 through the conﬁrmation key to conﬁrm the modiﬁcation, then select the appropriate channel value up and down, conﬁrm again, return to the Green 220 output through the conﬁrmation key to conﬁrm the modiﬁcation, then select the appropriate channel value up and down, conﬁrm again, return to output Blue 220 conﬁrm the change via the conﬁrm key, select the Appropriate channel value up and down, conﬁrm again and return to the output White 220 through the conﬁrm key to conﬁrm the modiﬁcation, then select the appropriate channel value up and down, conﬁrm again, return to exit Logo 000 to through the left soft key to conﬁrm, then select the appropriate logo, up and down, and then conﬁrm, return to exit

DISPOSAL

Packaging:

The packaging can be recycled using standard disposal methods and reintroduced into the reusable material cycle.
Please follow the laws and regulations regarding disposal and recycling of packaging in your country.

Device:

This device is subject to the Waste Electrical and Electronic Equipment (WEEE) Directive of the European Union. Used appliances should not be disposed of with household waste. Used device must be disposed of through an approved disposal company or a municipal disposal facility. Please comply with the applicable regulations in your country.
Please follow all the disposal laws and regulations in your country.
As a customer, you can obtain information on environmentally-friendly disposal options from the product seller or the appropriate regional authorities.

TABLA DMX

Channel	Function	Value
1	X (pan)	000-255
2	Y (tilt)	000-255
3	XY speed	000-255
4	General dimmer	000-255
5	Red 1st group	000-255
6	Green 1st group	000-255
7	Blue1st group	000-255
8	White 1st group	000-255
9	Strobe	000-255
10	Zoom	000-255
11	Function mode	000-255
12	Function mode speed	000-255
13	X pan ﬁne	000-255
14	Y tilt ﬁne	000-255
15	Reset	000-249 no effect