TAKSTAR WPM-400SR Wireless In-Ear Monitoring Earphones User Manual

TAKSTAR WPM-400SR Wireless In-Ear Monitoring Earphones

Function Descriptions

Charging Case (Transmitter):

1. Battery LED: shows battery level.
2. Work Mode LED: shows TWS status or Monitoring status.
3. Mode Button [M]: double-click to switch between TWS and Monitoring modes. Press and ho Id for 8s to clear pairing history, then click three times to start pairing multiple sets of earphones.
4. Type-CI nte rface: for charging the case via Type-C charging cable, or for connecting audio device via supplied audio adapter cable.
5. Power Switch: open/close the charging case lid to power on/off respectively.

Earphones (Receivers):

1. Touch Area: for controlling music playback, answering/rejecting/ending calls.
2. LED Dot: lights up for 3s when powered on, then goes off into pairing status; flashes when earphone battery is low; and goes off upon auto power-off when placed into charging case.

Preface

Dear Customer,
Thank you for purchasingTakstarWPM-400S/S R Wireless In-Ear Monitoring Earphones. In orderto better understand and use the product, please read this manual carefully. If you have any questions or suggestions, please contact ou r local dealer.

Features

• Multi-functional wireless in-ear monitors, suitable for streaming and music listening.
• One-key switch between Monitoring and TWS modes for various applications.
• Pair multiple sets of earphones for synchronous monitoring.
• 2. 4GHz wireless transmission upto about 10m, quick pairing, auto reconnecting.
• Professional-grade monitoring, low latency for smoother streaming and interaction. • In-ear design, compact and comfortable to wear, carry music with you as you move around.
• Charging case and transmitter integrated in one, super-portable, supports wired or wireless charging.
• Transmitter uses supplied Type-C to 03.5mm cablefor easy connection with audio devices like audio interface or mixer.
• Built-in Li-ion battery lasts up to 4hrs.

Package Contents

WPM-400S Wireless In-Ear Monitors

• Charging Case (Transmitter) ……. 1 pc
• Earphones (Receivers) ………. 1 pr
• Type-C Charging Cable … 1 pc
• 3. Smm-To-Type-C Audio Cable …… 1 pc
• Silicone Tips …. 3 prs
• 03.Smm-To-6.3mm Adapter ….. 1 pc
• UserManual …. l PC

WPM-4005 R Wireless In-Ear Monitors

• Charging Case (Transmitter) …… 1 pc
• Earphones (Receivers) ….. 1 pr
• Silicone Tips …. 3 pr
• Type-C Charging Cable ….. 1 pc
• UserManual …… l PC

Applications

Suitable for entertainment stream, livestream e-commerce, music listening.

Specifications

Earphones Specifications

• Frequency Range: 2.4G Hz
• Frequency Response: 20Hz-20KHz
• Sensitivity: -38 DBFS
• S/N Ratio: 64 d B(A)
• Transmission Delay:25ms
• ChargingVoltage: DC4. 8~5.4V
• Battery Life (Monitoring mode): about4hrs
• Battery Life (TWS mode): about 6.5hrs
• Charging Time: about 1.Shrs
• Battery Capacity: 55mAh
• Weight: about5.4g
• Dimensions: 36’20’24mm
• ChargingTemperature: 0 to45° C
• Operating Temperature: -10 to 60° C

WPM-400S Charging Case Specifications

• Frequency Range: 2.4GHz
• Charging Time (Wireless): about 7hrs
•  Battery Capacity: 700mAh
• Battery Life (Monitoring): about hrs
• Battery Life (Charging Earphones): about 4 full charges
• Weight: about48g
• Dimensions: 65’53’32mm
• Charging Temperature: 0 to 45° C

WPM-400S R Charging Case Specifications

• input voltage: SV/lA
• Charging Time (Wired): about2hrs
• Charging Time (Wireless): about7hrs
• Battery Capacity: 700mAh
• Battery Life (Charging Earphones): about4 full charges
• Weight: about48g
• Dimensions: 65’53’32mm
• Charging Temperature: 0 to 45° C
• Operating Temperature: -10 to 60° C
  Note: The above data a re-measured by Taksta r laboratory.

Operation Instructions

Place-back Detection (into charging case)

1. Left earphone placed: left LED lights up green for ls then goes off, indicating successful contact and charging started.
2. Right earphone placed: left LED lights up green for ls then goes off, indicating successful contact and charging started.
3. Both earphones placed: left LED flashes green twice, each for ls then goes off.

Live Stream Monitoring

Transmitter/ChargingCase

1. Use the audio adapter cable included, and connect the device with audio interface as shown in the above figure.
2. The first time you open the case lid, the device shows power level then enters Monitoring mode by default. Open the charging case, the right LED on the case turns blue permanently, take out the earphones to start monitoring.
3. The previously selected mode is retained in memory and called on next power-up.

Switch TWS/Monitoring Mode:

1. Under Monitoring mode, place the earphones (either or both) into the charging case, then double-click the [Ml button to enter TWS mode, indicated by the right LED flashing blue.
2. Under TWS mode, place the earphones (either or both) into the charging case, then double-click the [Ml button to enter Monitoring mode, indicated by the right LED staying blue.

TWS Connection

1. The earphones start in Monitoring mode by factory defau It. To switch to TWS mode, place the earphones back in the charging case and double-click the [Ml button, the right LED on the case will flash to indicate TWS mode.
2. Turn on your phone, go to settings, enable wireless connection and search for a device named “TAKSTARWPM-400S/TAKSTAR WPM-400S R” , tap it to connect.

SmartTouch Control

Touch Control Descriptions

Call Notification| Same as your phone’s ringtone.
Answer/ En d Call| Tap the touch area on either earphone.
Reject Call| Touch and hold the touch area on either earphone for l.Ss.
Music Play/Pause| Tap the touch area on either earphone.
Previous Tack| Double-tap the touch area on the left earphone.
NextTrack| Double-tap the touch area on the right earphone.
When usingonlyoneearphone,double-tap it switches to Next Song only.
Stereo/Single Mode Switch| Take either or both earphones out, and they will auto-reconnect to form mono/stereo audio.
Auto Reconnect| Activated when re-entering connection range within 3min.
Auto Play| Auto resume playback interrupted by incoming call after call ends.
Voice Assistant| Touch and hold the touch area on either earphone for2s until you hear” Du” to activate the assistant.
Low Power Prompt| “Du” tone ale rt once every 5% battery level is lost when below 20% until auto shutdown. (no prompt in monitoring mode)
Battery Level| Indicated by the meter aside the Bluetooth icon on the status bar of your connected smartphone (Android 8.1 or above)

Pairing Method for One-To-Many Monitoring:

Multiple master devices

(A & Bare both master device WPM -400S)

| Master and slave devices

(A is master device WPM -400S; C is slave device WPM -400SR)

---|---
Set A to Monitoring mode, set B to TWS mode, then place B’s earphones into A’s charging case, and long press [Ml button for 8s until the LED on earphones flashes ls to clear pairing history. Next, click [Ml three times to pai r. Follow the same steps to pair each new set of earphones to enable monitoring same content across multiple devices.

If the earphones faiI to monitor, retry the afore steps.

To reconnect the earphones to B, place the earphones

back in Bchargingcase and follow the afore si milar steps.

| Set A to Monitoring mode, (C is already TWS mode), then place C’s earphones into A’s charging case, and long press [ M l button for8s until the LED on earphones flash ls to clear pairing history. Next, click [Ml three times to pair. Follow the same steps to pair each new set of ea rp hones, indicating successful contact and charging started. If the earphones fail to monitor, retry the afore steps.

To reconnect the earphones to C, place the earphones back in C charging case

and follow the afore similar steps.

Clear Pa iring:
Open the charging case lid when both earpieces are inside, press and hold the case button for Ss u nti I the LED dots on both earphones light up for ls to clear the pairing history.

Charge the Charging Case:

1. Wireless Charging:
   Note: To ensure normal functionality, please use a wireless charging device that meets Qi standard for charging.

2. Wired Charging:
   Note: To ensure normal functionality, please use the supplied charging cable to connect the case with the power supply for charging.

Charging Indicator on Charging Case

l.When the earphones or case is low power, left LED flashes red for 10s.

2.When the earphones or case battery level is normal, left LED lights up solid green for 10s.

Note: Click [M] button to check the battery status when lid is closed.

| l.ln M on itoring mode, right LED turns solid blue while left LED shows case battery level.

2.ln TWS mode, right LED flashes blue while left LED shows case battery level. 3. While charging, left LED flashes red; when fully charged, left LED turns solid green.

Prompt Tone Descriptions: Power-on:
Power-off: “Du~” (long tone) Stereo pairing success: “Du”
Connected: “Du/'” (rising tone) Disconnected: “Du”” (falling tone) Low battery: “Du Du”

Safety Instructions

To avoid electric shock, overheating, fire, radiation, explosion, mecha n ica I risk and injury or property loss due to improper use, please read and observe the following items before use:

1. Please check if the power of the connected equipment matches with that of th is product before operation. Adjust the volume to proper level during operation. Do not operate at over-power or high-volume level for extended ti me to avoid product malfunction or hearing impairment.
2. If there is any abnormality du ring use (e.g., smoke, strange odor), please kill the power switch and unplug from power source, then send the product to the loca Idea ler for repair.
3. Keep th is product and its accessories in ad ry and ventilated area. Do not store in a hum id or dusty area for extended ti me. Keep away from Ii re, rain, liquid intrusion, bumping, throwing, vibrating, or from blocking any ventilation openings, to prevent malfunction.
4. Please a bi de by safety rules during operation. Do not use the product in places prohibited by laws or regulations to avoid accidents.
5. Do not disassemble or repair the product by yourself to avoid injury. If you have any questions or require any services, please contact our local dealer.

Label Meanings

According to the test results obtained based on RL2004/108/EG (Electromagnetic Compatibility Directive) and RL2006/95/EG (Low Voltage
Directive), th is product complies with the limits specified in the European Community EMC (Electromagnetic Compatibility) Directive, an integration of relevant laws from its member states.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
  Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
   FCC ID: WRAWPM-400S
   FCC ID: WRAWPM-400S R

AboutThis Manual

This manual contains up-to-date technical specifications as of printing. However, specifications contained herein may not conform to your particular product since Taksta r is constantly improving its products. For the latestversion/more information, please visit our website: https://www.takstar.com/.
Specifications, devices or accessories available may vary from region to region. If you have any questions, please contact our local dealer.

Guangdong Takstar Electronic Co., Ltd. Address: No. 2 Fu KangYiRd., Longxi Boluo Huizhou, Guangdong 516121 China
Email: sales@takstar.com Website: www.takstar.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>