Meyer Cross TV1764 Blackened Bronze TV Stand Instruction Manual
- June 12, 2024
- MEYER CROSS
Table of Contents
Meyer Cross TV1764 Blackened Bronze TV Stand
Product Information: TV Stand
The TV Stand is a furniture piece that is designed to hold a television. It comes with all the necessary hardware and parts for assembly along with pre- assembly instructions. The furniture is made in China and comes with precautions that need to be taken while assembling it.
Precautions:
- Assemble the furniture on a soft surface to prevent damaging the parts during assembly.
- Make sure the assembly is done on a level surface to ensure stability.
- If the glass shelves do not properly fit in place, remove the glass shelves and loosen ONLY the shelf screws to allow extra room in the metal frame. Replace the glass shelf and then carefully tighten all screws. Do not overtighten screws. Once the glass shelves are in place, DO NOT TILT!
Assembly Instructions
- Two people are recommended to assemble this furniture.
- Carefully remove all parts and hardware from carton, along with any protective packaging.
- Locate and set aside the hardware kit before discarding packaging. Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or hardware.
- Assemble the furniture on a soft surface, and take extra care not to scratch or damage parts during the assembly.
- If the glass shelves do not properly fit in place, follow the precautions mentioned above.
Once assembled, the TV Stand should not be tilted. It can be used to hold a television and other equipment. Refer to the user manual for more information on usage and care.
PRE-ASSEMBLY
- Two people are recommended to assemble this furniture.
- Carefully remove all parts and hardware from carton, along with any protective packaging.
- Locate and set aside the hardware kit before discarding packaging.
- Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or hardware.
- Assemble the furniture on a soft surface, and take extra care not to scratch or damage parts during the assembly.
Save these instructions
Made in China
PRECAUTIONS:
Do not place items on the shelves which exceed the maximum weight limits of:
- Top shelf: 75 lbs. (34.0 kg)
- Middle Shelves: 30 lbs. (13.6 kg) each
- Bottom Shelf: 50 lbs. (22.7 kg)
Usage with televisions or loads heavier than the maximum weights specified may
result in instability, causing tip-over and resulting in death or serious
injury.
When in use, this furniture must be placed on a flat, solid and level surface.
Do not climb or step on the shelves.
Remove ALL items from the furniture before attempting to move the furniture.
Part Description Quantity
MAKE SURE THE ASSEMBLY IS DONE ON A LEVEL AND SOFT SURFACE (SUCH AS BLANKETS)
TO PREVENT DAMAGING THE PARTS DURING ASSEMBLY. 
DO NOT YET FULLY TIGHTEN SCREWS.
Two people are recommended to assemble this furniture. 
NOTE:
Once all parts are properly installed and fit together securely, then tighten
all screws fully. DO NOT OVERTIGHTEN SCREWS! 
If the glass shelves do not
properly fit in place, then remove the glass shelves and loosen ONLY the shelf
screws to allow extra room in the metal frame. Replace the glass shelf and
then carefully tighten all screws. Do not overtighten screws. Once the glass
shelves are in place, DO NOT TILT!
Finished 
CARE INSTRUCTIONS:-
- Wipe clean with a soft, dry cloth or static duster.
- Always avoid the use of harsh chemicals or abrasive cleaners as they may cause damage to the table’s finish.
- Hardware may loosen over time. Periodically check to make sure all connections are tight. Re-tighten if necessary.