UMIDIGI A15 MP33 Smartphone User Guide
- June 12, 2024
- Umidigi
Table of Contents
UMIDIGI A15 MP33 Smartphone User Guide
OVERVIEW
- POWER BUTTON: Long press to turn on the device; When the device is on, short press Power Button to shutdown or turn on the screen.
- VOLUME BUTTON: Short press to adjust the volume or to mute incoming calls.
CARD INSERT
Insert Nano-SIM Card
Please face the chip side of the Nano-SIM card adown when inserting into the
slot. Be aware of the direction of the cut edge when placing the Nano-SIM card
into the slot.
Reminder: Please use standard Nano-SIM card. Please don’t use a non- standard card that is hand-cut, in order to prevent the SIM slot and card tray from being damaged and card-rejection situation that may cause damage to the phone.
TF Card Installation
Please place the metal contact of the TF card adown, be aware of the direction
of the cut edge. Place the card onto the tray and insert into the device.
Reminder: Please turn off the phone before changing or replacing the TF
card.TF card does not come with the phone, please purchase separately.
Please do not plug in and out of the SIM card tray when the phone is on. Be
careful when using the slot thimble from Scratching the phone.
DUAL-SIM MANAGEMENT
Please choose which SIM card slot to be the main one to be for 4G network via
Setting> SIM Card. Choose your preferred network types of 4G/3G/2G via
Setting> Network&lnternet> Mobile network >Preferred network type
FINGERPRINT identification
You can unlock the screen by fingerprint ID function. Click Setting> Security
&Location> Fingerprint, please enter your fingerprint information by following
the in structions on the screen.
Reminder: Please ensure your finger clean and dry when giving your
fingerprint information to the phone.
Please enter the information of your finger pulp for fingerprint information
When unlocking the phone by fingerprint, please place your finger pulp on the
touch ID sensor for about a second.
NETWORK CONNECTION
Connecting WLAN
Into the setting of WLAN via Settings>Network&Internet> Wi-Fi When WLAN is on,
a list available WiFi connection will appear. Click on the one you want to
connect to, enter the password if the network isencrypted, then click Connect.
When it’s a public network, just click Connect When the network shows
connected it is available to use.
Bluetooth Function
Into the setting of Bluetooth function via Settings> Connected
devices>Bluetooth Enable the Bluetooth function by clicking the Menu Button
then select “Refresh”, then the phone will search for available Bluetooth
devices for pairing and list on the screen. Click on the one you want to pair
with, then click Pair” on the dialog pop-up.Documents are available for
transmission after Bluetooth pairing.
Reminder: Slide down the status bar twice to open the shortcut switches
for Bluetooth and other functions.
WLAN Hot-spot Setting
Click on via Settings>Network&Internet>Hotspot&tethering >Wi-Fi hotspot to
turn on the Portable WLAN Hot-spot function. When setting up WLAN hot-spot,
enter your user name in “Network Name” and password, then click Save. Another
device can use the WLAN hot-spot by searching and entering the password of the
password.
Reminder: Please enable the Data Connection before enabling the network
sharing function. Your mobile traffic will be shared by other devices, so
please use it carefully. The signal of the WLAN hot-spot depends on the signal
strength and devices.
CAMERA
Aim the camera at the shooting object, the phone will start focus automatically; or you can click on the screen to choose the object you want to focus on, then click “Capture” icon to take photos. You can also choose other modes such as video recording. beautifying, panorama to take photos/videos.
INSTRUCTIONS FOR DUAL-CARD STANDBY
“Dual card, dual standby, single pass” means you can insert two SIM cards and
have them both “standby”, but cannot make phone calls at the same time. During
the standby mode both cards are available for receiving phone calls, but once
one of the cards is activated, the other one cannot receive phone calls nor
make phone calls.
SECURITY INFORMATION
- Security information (including BS, ES, battery security information) of third-party software installation and function may vary in different regions or by different hardware specifications.
- UMIDIGIholds disclaimer for the performance problem or incompatibility caused by third-party applications, registry editing, OS software modifying. Customizing the OS may cause the device or some applications fail to work properly.
- Please prevent the device or the battery in extreme cold/hot condition. The extreme temperature will lead to deformation of the phone and reduce the charging capacity and battery life.
- Please only use the custom-designed and approved battery and recharger by UMIDIGI. Incompatible battery and recharger may cause damage to the phone. Please abide by local regulation when disposing of the used batteries and phones.
- Please do not place the battery or the phone onto or inside heating devices such as microwave, Oven or radiator. The battery may explode if it gets too hot.
- Please do not crush or pierce the battery. Prevent the battery from getting high pressure from outside, it may cause internal short and overheating.
SPECIFICATIONS
BASIC INFORMATION
- Model: F3 5
- Operating system: AndroidM 12
- CPU: MediaTek MT6833 (Dimensity 700), 2xCortex-A76 + 6xCortex-A55, up to 2.2GHz
- GPU: ARM Mali-G57 MC2
- RAM: 8GB
- ROM: 28GB
- Battery: 5150mAh
- Touch ID: Side Fingerprint
Display
- Screen Size: 6.7 inch
- Resolution: 720×1650 Pixels
- Touch: Capacitive multi-touch
Cameras
- Rear Camera: 16MP Camera
- Front Camera: 48MP+8MP+5MP Camera
Connection(/O)
- Band
- 5G: NR N5
- LTE FDD: B2/5/12/13
- LTE TDD: B41
- WCDMA: B2/5
- GSM: B2I5
- NFC: Yes
- SIM/TF card: 2 Nano SIM Card Or 1 Nano SIM and 1 TF Card
- WIFI: IEEE802.11 aclalb/g/n
- Bluetooth: Bluetooth 5.1
- GNSS: GPS, Beidou, Glonass, Galileo
- FM: Yes
- Earphone Port: 3.5mm
- USB Port: Type-C
Other Features
- Video File Format: 3GP/MPEG4,etc.
- Audio File Format: WAV/MP3/AACIAMR/MIDI/APE/WMA, etc.
- Card Extend: Support TF card up to 256 GB
- Language: Support Multi-language
- Sensor: G-Sensor, -5ensor, L-Sensor, Compass,
In the box
- 1x Phone
- 1x Screen Protector (pre-applied)
- 1x Phone Case
- 1x Type-C Cable
- 1x Power Adapter
- 1x SIM Tray Ejector
- 1x Quick Start Guide
Scan following QR-codes to follow us and enter giveaway to win a UMIDIGI smart device for free!
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>