CRYSTORAMA MAR-A8031-MK Marshall 1 Light Wall Mount Instruction Manual
- October 30, 2023
- CRYSTORAMA
Table of Contents
CRYSTORAMA MAR-A8031-MK Marshall 1 Light Wall Mount
MODEL #MAR-A8031-MK
WARNING
- Electrical Danger
- Tum Power Off
- All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes
- You will need 1-Medium 60 watts Max Bulb not included USE LED BULBS FOR EXTENDED USE
How to Install
This is a convertible piece. Installation steps for both Hard-Wire and Plug-In options are below. For Hard-wired installation, please proceed as follows
- Remove the plug wires from the fixture wires.
- Remove the Nut (D) from the bottom of Back Plate (B) and cover the hole with plug (E).
- Attach the Shade (H) onto Socket (G) and screw on the finial (I).
For Plug-in installation, please proceed as follows
- Connect Rod (F) to the bottom of Back Plate (B).
- Determine the desired location you’d like to put this fixture on the wall, and mark two points on it with same distance as between the holes on the Back Plate (B).
- Drill the holes at the marked points and insert the anchors into the holes in the wall, Attach the mounting plate onto the wall by anchor screws.
- Attach the Back Plate (B) onto mounting plate.
Part Number
- A. Mounting Hardware (1) Wire Nut (1)Mounting Plate (4)Mounting screws (4)Anchors
- B.(1)Back plate;6″x6″X0.79″h XMO8031MKBKP6IN
- C.(1)Swing arm
- D.(2)Connector
- E.(1)Plug
- F.(2)Rod;∅0.5″x12″h; XMO8031MKROD12IN
- G.(1)Socket
- H.(1)Shade;∅12.4″x9″h XMO8031SHA12.4IN
- I.(1)Finial XMO8031MKFIN
- J.(1)Finial CAP
References
Read User Manual Online (PDF format)
Loading......