UBIQUITI USW-Flex-Mini UniFi Flex Mini Switch User Guide

USW-Flex-Mini Quick Start Guide

Package content

Unifi Flex Mini Switch Power Adapter (5V, 1 A)*

• Included in USW-Flex-Mini single pack only.

System Requirements

• Linux, Mac OS X or Microsoft Windows
• 7/8/10 We recommend Java Runtime Environment 1.8
• or higher Web browser: Google Chrome (other browsers may have limited functionality)
• Unifi Controller Software v5.12.5 or later, available at: ui.com/download/unifi

Device overview

1. System LEDs

Alternation  between  white  and
blue| The device is busy; do not touch or unplug it. It usually indicates that some process is taking place, such as a firmware update.
steady  blue  light| Network approval successful and correct operation.
blinking  blue| It is used to locate a device.
The System LED will flash blue when you click the Locate option in the UniFi Controller software. The  software  will also show the location of the UniFi switch on the map.

2. RJ45 Link/Speed/Activity LED (Ports 1 – 5)

Blinking indicates activity
Green| Link established at 1000 Mbps (1 Gbps)
Blinking indicates activity

3. Puerto PoE In
This RJ45 port supports 10/100/1000 Mbps Ethernet connection and 802.3af/at PoE input.
RJ45 ports support 10/100/1000 Mbps Ethernet connections.

5. power port
Connect the included power adapter to the power port.

6. Reset button
Restore factory defaults. The device should be running after the startup is complete. Press and hold the Reset button for about 10 seconds until the LED indicator starts flashing and then stays on continuously. After a few seconds, the LED indicator will turn off and the device will reboot automatically.

Power connection

ethernet connection

Software installation

Download and install the latest version of the UniFi driver software at ui.com/download/unifi and follow the instructions on the screen.
Note: If you already have UniFi Controller version 5.12.5 or later installed, go to the “UniFi Switch Deployment” section.
Once you have installed the software and run the UniFi Setup Wizard, a login screen for the UniFi Controller management interface will appear. Enter the administrator name and password you created and click Sign In.

To deploy the UniFi Switch, go to “UniFi Switch Deployment”.
You can manage your wireless network and view network statistics through the UniFi Network Controller’s management interface. For information on setting up and using the UniFi Network controller software, please refer to the user guide located on our website: ui.com/download/unifi

Implementation of the UniFi switch

1. From the UniFi controller panel, click Devices on the toolbar. left menu.
   

2. On the Devices screen, locate the UniFi Switch in the list of devices in the Model column. To approve the UniFi Switch, click Adopt.
   

3. The System LED on the UniFi Switch will turn blue to confirm that has been successfully implemented.

specs

USW Flex Mini

0.04 A)
Power supply| 5V,  1A  power  adapter*
voltage range USB Type-C port
PoE 802.3af/at| 4,7 – 5,2 V CC
44 – 57 V CC
Lucas  LED System RJ45  data  port| state link/speed/activity
ESD/EMP protection| ±16  kV  air,  ±12  kV  contact
Operating temperature| -5  to 45° C (23° F to 113°  F)
operating humidity| 10 to 90% non-condensing
Certifications| CE, FCC, IC

• Included in USW-Flex-Mini single pack only.

safety instructions

1. Read, follow and save these instructions.
2. Pay attention to all warnings.
3. Only use the devices or accessories indicated by the manufacturer.
   WARNING: Lack of adequate ventilation may result in a fire hazard.
   Keep at least 20mm clearance next to the ventilation holes for proper ventilation.
   WARNING: To reduce the risk of fire or electric shock, do not expose the product to rain or moisture.
   WARNING: Do not use this product in a place where it can be submerged in water.
   WARNING: Avoid using this product during a lightning storm. There is a remote possibility of an electrical discharge caused by lightning.

electrical safety information

1. It is mandatory to comply with the current, frequency and voltage requirements indicated on the manufacturer’s label.
   Connection to a power source other than those specified may result in malfunction, equipment damage, or fire hazard if limitations are not followed.

limited warranty

ui.com/support/warranty
The limited warranty requires arbitration to resolve disputes on a case-by- case basis and, where appropriate, specifying arbitration instead of jury trials or class actions.

Compliance

FCC
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions.
1. This device may not cause harmful interference, and 2. This device must accept any interference, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

ISED from Canada
CAN ICES-3(B)/NMB-3(B)

Australia and New Zealand

CE marked
The CE marking of this product indicates that the product complies with all applicable directives.

WEEE Compliance Statement online resources

© 2021 Ubiquiti Inc.
All rights reserved.

References

• Ubiquiti - Rethinking IT
• Ubiquiti - Warranty
• WEEE Compliance Statement
• Ubiquiti - Rethinking IT
• Ubiquiti - Warranty

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>