ANNKE AU-DW81KD1-V3-58BG-V2-P Security Camera System User Manual
- October 30, 2023
- ANNKE
Table of Contents
- ANNKE AU-DW81KD1-V3-58BG-V2-P Security Camera System
- Description of Panels
- Important reminder
- Connect Your System
- Connection Diagram
- System setup
- Remote Control
- FAQ’s
- How do I connect my camera to the DVR in the ANNKE AU-DW81KD1-V3-58BG-V2-P
- Video – Product Introduction
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ANNKE AU-DW81KD1-V3-58BG-V2-P Security Camera System
Description of Panels
Front Panel
- Power LED: Turns yellow when DVR is powered up.
- HDD LED: Turns red when data is being read from or written to HDD.
- Network LED: Turn yellow when the network is connected.
Real Panel
- VIDEO IN: BNC interface for TVI and other analog video input.
- HDMI: HDMI video output connector.
- AUDIO OUT: RCA connector for audio output
- USB Port: USB port for mouse, USB drive, and other additional devices.
- Power Supply: 12V DC power supply
- GND: Ground(needs to be connected when NVR starts up).
- Network Interface: Connector for network
- AUDIO IN: RCA connector for audio input
- VGA: VGA video output connector.
Important reminder
- You can record and playback only after the hard disk is installed. Otherwise, you can only preview.
- Make sure that the plug is firmly connected to the power socket.
- Do not drop the camera or subject it to physical shock to avoid damage.
- Do not touch the lens of the camera with fingers. If cleaning is necessary, use a clean cloth with a bit of ethanol and wipe it gently.
- Do not place the camera in extremely hot, cold(the operating temperature shall be -40°C to 60°C), dusty or damp locations, and do not expose it to high electromagnetic radiation.
- The recommended installation height of the camera is more than 2 meters.
- In the scope of camera monitoring, it should try to avoid large areas of all-black objects, open spaces, water, and other objects that absorb infrared light, otherwise, the night vision effect will be reduced.
- The installation angle of the camera is very important. Do not obstruct the edges of the image, as this will result in poor image quality, and do not aim the camera at the sun or other extra bright places.
Connect Your System
A: Connect your Camera to the video cable.
Connect Camera’s BNC female and DC male port to the video cable’s BNC male and
DC female port.
Connect the video cable’s BNC port to the DVR’s BNC video in port.
B: Connect the video cable to the DVR.
C: Connect the video cable to the 1 to 4 power splitter cable.
Connect the video cable’s DC port to the 1 to 4 power splitter cable’s DC
female port.
Connect the 1 to 4 power splitter cable’s DC Male port to the camera’s power
DC port.
D: Connect the 1 to 4 power splitter cable to the camera’s power.
E: Connect your DVR to an HD TV/monitor.
Connect your DVR to an HD TV/monitor via an HDMI or VGA cable for live view.
F: Connect your DVR to the router.
Connect your DVR’s RJ-45 port to the router’s LAN by network cable (Not
included) for remote view.
G: Connect the mouse to the DVR.
Connect the mouse’s USB port to the DVR’s USB port.
H: Connect the DVR’s power adapter
Connect the DVR’s power adapter to the DVR’s 12V input port.
I: Test the camera
We recommend that you test the camera locally before fixing the camera.
J: Install the camera
Install the camera in the desired location, please disconnect the power before
installation.
Connection Diagram
System setup
We suggest you follow the wizard to set your DVR, finished it step by step.
Wizard setup:
- Create your password
- Set Reserved E-mail, back up GUID file,
- Set unlock pattern, security question
- Setting signal input status
- Choose a system language
- Configure time zone
- Configure the IP Address and P2P function
- Configure Port and other settings
A: Create your password
For the first-time access, you need to activate the device by setting an admin
password. Input your password three times to create it. And we recommend you
reset your password monthly to protect your product better.
B: Set the P2P function
You need to manually create a verification code, which consists of 6 to 12
digits or letters, and then confirm it (ABCDEF is not allowed). Download our
free APP Annke Vision, then follow the APP prompt to scan the SN QR code to
add the device step by step.
The device can be successfully added only if the P2P’s status is online. You
can also go to Main Menu – Configuration- Network Settings – Platform Settings
to scan and add the device.
C: VGA/HDMI Output Resolution Adjust
The default DVR output resolution is 1024*768. For better viewing, please
adjust the DVR output resolution to a higher level if your monitor supports
it.
D: Menu Structure
The interface may be different between different models and different software
versions.
Remote Control
A: Connect DVR to the internet
Connect your DVR to your router by a network cable, go to Menu > Configuration
Network > Platform Access, and make sure the status of P2P shows Online.
B: Install Annke Vision APP
Download our free Annke Vision APP from Google Play or Apple Store, or just
scan the QR code below to download the app.
After installing the app, select the correct country or region where your
device is located, and click Register to sign up for an account by your mobile
phone number or email address.
C: Add device
Select “ ” or click the icon “ ” in the upper right corner to add a device.
You can go to Menu > Configuration > Network > Platform Access interface to
scan the SN QR code, follow the hint and finish it.
D: Live view and playback
Click the Device name to start live view, you can also playback the video,
share the device, and do other operations.
If you have any questions, Please go to help.annke.com first and submit a request to the support team. We will give you a satisfactory solution soon!
FAQ’s
What is the ANNKE AU-DW81KD1-V3-58BG-V2-P Security Camera System?
The ANNKE AU-DW81KD1-V3-58BG-V2-P is a security camera system that provides surveillance and monitoring for both residential and commercial properties. It includes multiple cameras and a digital video recorder (DVR) for recording and storing footage.
How many cameras are included in the ANNKE AU-DW81KD1-V3-58BG-V2-P Security Camera System?
The specific number of cameras included may vary depending on the package you choose. However, typically, the ANNKE AU-DW81KD1-V3-58BG-V2-P system comes with 8 cameras.
What are the key features of the ANNKE AU-DW81KD1-V3-58BG-V2-P Security Camera System?
The ANNKE AU-DW81KD1-V3-58BG-V2-P system offers various features, including high-definition video recording, night vision capabilities, motion detection, remote access, and smartphone compatibility. It may also include features such as weather resistance, wide-angle lenses, and customizable recording settings.
What is the video resolution of the cameras in the ANNKE AU- DW81KD1-V3-58BG-V2-P Security Camera System?
The ANNKE AU-DW81KD1-V3-58BG-V2-P cameras typically provide a video resolution of 1080p (Full HD). This resolution ensures clear and detailed footage for effective monitoring.
Does the ANNKE AU-DW81KD1-V3-58BG-V2-P Security Camera System have night vision capabilities?
Yes, the ANNKE AU-DW81KD1-V3-58BG-V2-P cameras are equipped with infrared (IR) LEDs, enabling them to capture clear images and videos even in low-light or complete darkness. The night vision range may vary depending on the specific model.
What do the LEDs on the front panel of the ANNKE AU-DW81KD1-V3-58BG-V2-P Security Camera System indicate?
The power LED turns yellow when the DVR is powered up, the HDD LED turns red when data is being read from or written to the HDD, and the Network LED turns yellow when the network is connected.
How do I connect my camera to the DVR in the ANNKE AU-DW81KD1-V3-58BG-V2-P
Security Camera System?
Connect the camera's BNC female and DC male port to the video cable's BNC male and DC female port. Then, connect the video cable's BNC port to the DVR's BNC video in port.
Can I record and playback footage without installing a hard disk in the ANNKE AU-DW81KD1-V3-58BG-V2-P Security Camera System?
No, you can only preview footage without a hard disk installed. Recording and playback require a hard disk.
What should I do if my camera is damaged?
Do not drop the camera or subject it to physical shock to avoid damage. If cleaning is necessary, use a clean cloth with a bit of ethanol and wipe it gently. Do not place the camera in extremely hot, cold, dusty, or damp locations, and do not expose it to high electromagnetic radiation.
What is the recommended installation height for the cameras in the ANNKE AU- DW81KD1-V3-58BG-V2-P Security Camera System?
The recommended installation height for the cameras is more than 2 meters.
How do I add a device to the ANNKE AU-DW81KD1-V3-58BG-V2-P Security Camera System using the Annke Vision app?
What is the default video resolution of the cameras in the ANNKE AU- DW81KD1-V3-58BG-V2-P Security Camera System?
The default video resolution of the cameras is 1080p (Full HD).
Does the ANNKE AU-DW81KD1-V3-58BG-V2-P Security Camera System have motion detection capabilities?
Yes, the system offers motion detection capabilities.
Can I access the ANNKE AU-DW81KD1-V3-58BG-V2-P Security Camera System remotely?
Yes, you can access the system remotely by connecting your DVR's RJ-45 port to the router's LAN by network cable for remote view. You can also use the Annke Vision app for remote access.
What should I do if I have questions or issues with my ANNKE AU- DW81KD1-V3-58BG-V2-P Security Camera System?
If you have any questions or issues, please go to help.annke.com first and submit a request to the support team. They will provide you with a satisfactory solution soon.
Video – Product Introduction
Download This PDF Link: ANNKE AU-DW81KD1-V3-58BG-V2-P Security Camera System User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>