ANNKE H500 IP Security Camera System User Guide

ANNKE H500 IP Security Camera System User Guide

ANNKE skill with Alexa

With ANNKE skill and Alexa, you can now interact with your ANNKE connected cameras using your voice. Currently the ANNKEDevice that are compatible with Alexa are listed below: N48PBB, N48PAW, N46PCK, I51DL, I51DM, I51DN, I51DQ, I81HD, I81HE,I91BQ, I91BV, I91BZ, I41CS, I41HG.

Before you start, make sure you have an echo show or similar device, and the echo show has been successfully configured andnetworked using the mobile app Amazon Alexa;

Here we take an IP camera as an example, the operation steps are as follows:

1. Add device to Annke Vision APP. Power on the device and connect it to the router with a network cable to link it to the Internet; Use the mobile app Annke Visiontoadd the device. For details, see the link below if you use Annke Vision to add a device: https://help.annke.com/hc/en-us/articles/900000598586

2. Check the platform access status and coding format. Use SADP tool to obtain the IP address of device, and then login the device browser setting to ensure that the platfor maccess status is online.
   Make sure that the video encoding format of the corresponding channel device is H.264. If it is H.265, please change it to H.264, because Alexa does not support

3. Modify the device name and turn off Image and Video encryption. Modify the device name at the app to a practical and easy-to-use name. (i.e., baby room, front door, etc.). Make the Image and Video encryption function of device is turned off
   

4. From your Alexa App, search for ANNKE, enable the “ANNKE”skill and link it to your Annke Vision account. Discover your cameras by asking Alexa “Discover devices” or by pressing the Discover Devices button in the Alexa app.
   

5. Once your account is linked, viewing your cameras is supported on Amazon Echo Show, Echo Spot, Fire TV, 2nd Gen Fire StickorFire Tablets (7th gen and above),to see your camera, just say “Alexa, show the (camera name)

Note

1. Video encoding format of device need to be set to H.264 not H.265;
2.  The image and video encryption function of device must be turned off

For more information and resources, please visit ANNKE online at www.annke.com/kb, or contact our support teamat support@annke.com.

References

• kb

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>