UBIQUITI UACC-OM-SM-1G-S-2 Network Transceiver Module User Guide
- October 30, 2023
- UBIQUITI
Table of Contents
UBIQUITI UACC-OM-SM-1G-S-2 Network Transceiver Module
Product Information
The Ubiquiti UACC-OM-SM-1G-S-2 is a fiber optic jumper that is designed to be used with the WL-ZGWMDPB-G100-0 application example. It is compatible with transceiver gb and switch con interface SFP.
Product Usage Instructions
Follow the below steps to use the Ubiquiti UACC-OM-SM-1G-S-2:
- Insert the module (Gbic) in the corresponding SFP port before proceeding with the connection.
- Open the fiber optic jumper packaging and remove the protections from the tips of the fiber optic jumper connectors.
- Connect one end of the fiber optic jumper to the corresponding Gbic in the network switch.
- Connect the other end of the fiber optic jumper to the other device that needs to be connected over the network.
- Ensure that all connections are secure and properly seated.
- Power on the devices and test the network connection.
application example
INSTRUCTIONS
- Step 1.- The module (Gbic) must be previously inserted in the corresponding SFP port.
- Step 2. – Next, we open our fiber optic jumper packaging and remove the protections from the tips of the fiber optic jumper connectors.
- Step 3.- The connection of each one of the ends of the jumper is made in the corresponding Gbic in the network switch.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>