anslut 019023 RGB Strip LED Light Instruction Manual
- June 4, 2024
- anslut
Table of Contents
anslut 019023 RGB Strip LED Light
SAFETY INSTRUCTIONS
Carefully read the instructions before use! Save them for future reference.
- FOR INDOOR USE ONLY.
- Do not connect the string light to the mains while it is still in the packaging.
- The electrical installation should be carried out by an authorised electrician in compliance with national regulations.
- Only use the supplied mains adapter.
- Do not connect this string light to another string light
- Check that all connections are properly made before switching on the product.
- If the product does not work, check that the circuit is supplied with voltage.
- Keep children at a safe distance from the product when it is in use.
- If the permitted maximum voltage is exceeded this can damage the product, or reduce its life span.
- Do not look directly into the light source.
- Store out of the reach of children.
- Do not cover the product when in use.
- The power cord for this string light is not replaceable; if damaged discard the complete product. Do not run the power cord over sharp edges.
- Always unplug the power cord and allow the product to cool before cleaning, or maintenance to reduce the risk of electric shock.
- The light source is not replaceable. Discard the product if the light source stops working.
- Do not open or dismantle the product. The product does not have any parts that can be repaired by the user.
- Make sure the type plate is in good condition and legible.
SYMBOLS
TECHNICAL DATA
019023
- Transformer (In) 230 V ~ 50 Hz
- Transformer (Out) 12 V DC, 1.5 A
- Output LED (nominal) 15 W
- Protection rating IP20, class III
- Life span (nominal) 25,000 h
- Off/On switching 60,000
- Colour temperature (LED) RGB
- Cord length (transformer) 150 cm
- Length 3000 mm
- Width 10 mm
- Height 3 mm
019024
- Transformer (In) 230 V ~ 50 Hz
- Transformer (Out) 12 V DC, 2.0 A
- Output LED (nominal) 22 W
- Protection rating IP20, class III
- Life span (nominal) 25,000 h
- Off/On switching 60,000
- Colour temperature (LED) RGB
- Cord length (transformer) 150 cm
- Length 5000 mm
- Width 10 mm
- Height 3 mm
DESCRIPTION
Effective strip with 30 RGB LEDs per metre and 164 different functions controlled with the supplied remote control.
INSTALLATION
- FIG. 1
- FIG. 2
- FIG. 3
- FIG. 4
- FIG. 5
USE
Remote control functions
LIGHT EFFECTS
- A = Select colour
- B = 3 colours in static mode
- C = 7 colours in static mode
- D = 16 colours in static mode FIG. 6
- ON/OFF
- White
- Dimmer
- Length FIG. 7
- Switching speed
- Light effects
- Mix
- Fade
- Colour jump
- Mix FIG. 8
MAINTENANCE
Replace battery FIG. 9 
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>