V I V O MOUNT-RAIL02H Height Adjustable Clamp and Rail Set for Custom Wood Tray Instruction Manual

: October 30, 2023
: V I V O

Table of Contents

V I V O MOUNT-RAIL02H Height Adjustable Clamp and Rail Set for Custom
Height Adjustable Clamp and Rail Set for Custom Wood Tray – 2 Pack
SKU: MOUNT-RAIL02H
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
- SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS
PACKAGE CONTENTS
ASSEMBLY STEPS
- STEP 1
STEP 2
STEP 3
STEP 4
- 23% within < 15m
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

V I V O MOUNT-RAIL02H Height Adjustable Clamp and Rail Set for Custom

Wood Tray Instruction Manual

Height Adjustable Clamp and Rail Set for Custom Wood Tray – 2 Pack

Instruction Manual

SKU: MOUNT-RAIL02H

Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. Instruction Manual
Height Adjustable Clamp and Rail Set for Custom Wood Tray (2 Pack)

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

WARNING!

If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.

WARNING: CHOKING HAZARD

SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS

REQUIRED.

PACKAGE CONTENTS

TOOLS NEEDED

NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED.
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.

ASSEMBLY STEPS

STEP 1

Assemble Slider Brackets (A) to the Support Brackets (C) using M4x7mm Screws (S-A), making sure the countersunk holes on Support Brackets (C) are facing outward, as shown below. Tighten with a Phillips screwdriver.

NOTE: Clamp can be offset using the extra holes in Slider Brackets (A) to allow the tray to be pulled out an extra 1.2” (30mm) when in use. If mounted this way the tray will sit further out from desk edge.

STEP 2

Assemble Slider Brackets (A) with Support Brackets (C) to the keyboard tray using ST5x12mm Screws (S-B) , and tighten with a Phillips screwdriver.
NOTE: We recommend using a tray with a depth of no less than 10.5”, and a thickness of at least 5/8”.

STEP 3

Assemble Clamps (B) to Support Brackets (C) at desired height using M5x8mm Screws (S-C). Tighten with a Phillips screwdriver.
NOTE: Slider Brackets (A) and Clamps (B) should be paired with the corresponding “L” and “R” stickers.

STEP 4

Place Clamp Pads (D) on the underside of each Clamp (B). Place assembled keyboard mount on edge of desktop and tighten Clamps (B).
NOTE: To ensure keyboard tray is level, do not over-tighten Clamps (B). Slide keyboard tray forward/ back to desired position.

Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us

Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.

309-278-5303 AVG. RESOLUTION TIME (within office hrs) : 5M 4S

www.vivo-us.com Chat live with an agent!
AVG. RESOLUTION TIME (within office hrs) : < 15 M

help@vivo-us.com

AVG. RESPONSE TIME (within office hrs) : 1HR 8M