BODEGA K18 Acooler Portable Freezer User Manual

BODEGA K18 Acooler Portable Freezer

Safety Instruction

Features:

• High efficiency DC compressor and conversion module with high quality, long working life and fast cooling performance.

• 100% CFC & HFC free insulation with good heat preservation performance and low energy consumption.

• DC12V/24V or AClO0V to 240V (with Adaptor )

• Fast cooling to -20°C(with ambient temperature at 25°C/77°F)

• Intelligent car battery protection system

• Telescoping handle and wheels for easy outdoor use

• Dual fridge and freezer zone design with ample capacity

• The installation of DC power source in the boat must be handled by qualified electricians.

• Make sure to connect power to the suitable voltage socket anytime.

• No electrical devices used inside the refrigerator.

• The refrigerator can be powered on only after being unpacked and put on the floor for more than six hours.

• Make sure to keep the refrigerator horizontal when it is running. The tilt angle must be less than 5° for long time running and that must be less than 45° for short running.

• Good ventilation: it must be well ventilated around the refrigerator, so there should be some space around it.
  Back space: 200mm
  Side space: 100mm

• Avoiding heat source: the refrigerator should be placed in a well-ventilated place, away from heat source and try to avoid direct sunlight.

• Keep it stable: Put the refrigerator on the floor or in the car

• When there is water inside the tank, do not turn the refrigerator upside down to pour water. Dry the rain on it and do not soak the tank in the water.

• Please do not put metal such as hairpin or wire in the air inlet vent, outlet
  vent and gap.

•  Do not connect with other power except DC 12V/24V and AC 100V/240V.

• Do not soak the refrigerator in the water or wash it by water.

• The product cannot be repaired by other person other than the company’s maintenance personnel. If malfunction happens, please contact with our company
  for consultation.

• Cut off the refrigerator before cleaning to avoid electric shock.

•  Keep away from watery places or humidity to avoid leakage or shock .

Operating Description

• Power supply: DC 12V/24V or AC 100V~240V (With adaptor)
• DC power supply (Voltage must be 12V if there is built-in battery inside the refrigerator)
• Operation Method:
  • Long press ii for three seconds to LOCK/UNLOCK.
  • Press button to switch ON, long press button for three seconds to switch OFF.
  • Press +or- for temperature setting
  • Press setting and choose ECO(Energy-saving) or MAX(Fast cooling). Factory setting is MAX.
  • Long press for three seconds. When H flashes on the screen, select three battery protection modes H(High), M(Middle) and L(Low) by pressing setting button again. Factory setting is H.
  • APP type: Press setting button0after AP is displayed on the panel when connecting with APP by bluetooth
  • Turn off the fridge, long press the O button display C/F to select Celsius or Fahrenheit with + and – button.

Operating Panel& APP

• (-20)Current Temperature
• C. °F)Temperature Unit
• (13.Sv)Voltage
• (H.M.L)Vehicle voltage
• Protection Mode
• Battery Power (DC input voltage)
• Power Switch
• Setting
• (MAX.ECO)Running Mode
• Decrease Temperature
• Increase Temperature

APP Connecting Operation:

Please scan the corresponding QR code shown as below to download the APP. “Car Fridge Freezer” from App Store or Google Play, then open the bluebooth and the downloaded APP to search the fridge equipment, you will hear “Tick” sound, meanwhile there will be “AP” shown on the fridge display panel.
Notice: the Bluetooth and location authority should be allowed so that the refrigerator can be searched.
Press the setting button  on the fridge to connect your mobile.
By connecting the smart car refrigerator through the APP, you can check the temperature of the refrigerator, voltage and other information, as well as setting the temperature and cooling mode, etc.

Components Detail

Instruction when refrigerator used in car.
The refrigerator has a three-level battery protection function, which not only guarantees the normal operation of the refrigerator, but also protects the battery of the vehicle. When in the power-on state, long press SET button for 3 seconds and the display screen flashes H. Select low voltage protection L{low), M (medium) and H (high) by clicking SET button. The factory defaults to H (high) protection.
H should be set when the refrigerator connected to car power and M or L should be set when it is connected to portable battery or other backup battery. Because of the different output voltage between different vehicles, the battery gear can be set from H to M or from M to L if there is a voltage protection code Fl showed on the panel. The battery gear should be set to H if the refrigerator should keep working after turning off the car engine, or there will be a possibility that car battery is used excessively and the vehicle cannot be restarted.

Cleaning and Maintenance

Cleaning:

1. Please unplug the fridge first to avoid electric shock.
2. Do not soak the fridge in water and do not wash it.
3. Remove the cover and drain from the hole.
4. Use wet cloth to clean the fridge and dry it.

If you do not use the refrigerator for a long time, please follow the instruction:

1. Turn off the power and remove the plug.
2. Remove the items stored in the refrigerator.
3. Absorb all the water in fridge with dry cloth.
4. Place the fridge in a cool and dry place.

Troubleshooting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>