MiBOXER LS2S 5-IN-1 LED Strip Controller User Manual
- June 6, 2024
- MiBOXER
Table of Contents
MiBOXER LS2S 5-IN-1 LED Strip Controller User Manual
Features
5 in 1 (Single Color&CCT&RGB&RGBW&RGB+CCT) smart strip controller is our newly developed high-end LED controller controlled by wireless remote controller, also with smart phone control and 4G long distance control (2.4GHz gateway is needed). The controller has auto-transmitting and auto-synchronizing function and with single color, CCT, RGB, RGBW and RGB+CCT output mode. This controller adopt the widely used 2.4GHz wireless technology with the features of low power consumption, long signal transmitting and strong anti-interference,etc. One compatible remote control many controllers at the same time. Widely used on the controlling of hotel lighting and home lighting..
Parameters
- Model No.: LS2S
- Input Voltage: DC12V~24V
- Output: 6A/Channel
- Total Output: Max 10A
- Weight: 66g
- Working Temperature: -20~60℃
- RF: 2.4GHz
- Control Distance: 30m
- Connection: Common anode
- Size: 92.53659mm
DIN-Rail mounting size: TS-35/7.5 or TS-35/15 (Purchasing separately)
Indicating lamp showing instruction
Indicating Lamp Color
| Output Mode
---|---
White Light|
Single Color Mode
Yellow Light
| Dual White Mode
Red Light|
RGB Mode
Green Light
| RGBW Mode
Blue Light|
RGB+CCT Mode
Remote Controller
Compatible with these remote controls (Purchased separately). For more details, pls read the remote instruction.
Auto-synchronization function
Different controllers can work synchronously when they are started at different times, controlled by the same remote, under same dynamic mode and with same speed.
Remark
- Indicating Auto-transmitting.
- Controller will be auto-synchronizing in the same dynamic modes and within 30m controlling distance.
Auto-transmitting Diagram
One strip controller can transmit the signals from the remote control to another controller within 30m, as long as there is a strip controller within 30m, the remote control distance can be limitless.
Dynamic Mode Sheet
Saturation Adjustable both on static and dynamic mode.
Number|
Dynamic mode
| Brightness 8,S Peed
---|---|---
BrightnessColor Temperature| RGB / RGBW I RGB+CCT
1| White gradual change| colors gradual change| Adjustable
2| White jump to change| White gradual change
3| White Gradual + Jump to change| RGB color gradual change
4| NC| 7 colors jump to change
5| NC| Random jump to change
6| NC| RED Gradual + Jump to change
7| NC| Green Gradual +Jump to change
8| NC| Blue Gradual + Jump to change
9| NC| White Gradual + Jump to change
Connect to LED strip diagram
Please do not the product into the metal box, otherwise it will affect the control distance.
-
Controller connect to Single Color LED strip diagram
-
Controller connect to CCT LED strip diagram
-
Controller connect to RGB LED strip diagram
-
Controller connect to RGBW LED strip diagram
-
Controller connect to RGB+CCT LED strip diagram
Attention
-
Please check whether the input voltage of the constant voltage power supply is in accordance with the controller, and please check the connection of both the cathode and anode, otherwise the controller will be broken.
-
Please don’t connect wires with power on.
Please turn on again only when it is in right connection and no short circuit. -
Please do not use the controller in the place with widely range metal area or strong electromagnetic wave nearby, otherwise, the remote distance will be seriously affected .
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>